80mm Throttle Body for the LFX - Page 35 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

derek1387 · 04-20-2016, 07:08 PM

All i can say so far as i havent driven much yet is the throttle response is insane now. Cannot wait for the TPS to adjust, and then tune it!

5alive · 04-20-2016, 08:01 PM

Dude........it's about time they sent you that tube, I don't think it took the Right Brothers that long to fly around the world....they did go around the world.... right...haha , look next time anyone needs tubes,intake parts, turbo fittings, nitrous fittings,check valves, pressure testing couplers.......check this place out
.looks nice, good job!!
http://www.siliconeintakes.com

camrytt · 04-20-2016, 08:33 PM

No 3.5" one on there

5alive · 04-20-2016, 08:41 PM

True.....l guess it's not for everyone.....but it's worth a try.......

derek1387 · 04-21-2016, 09:47 AM

Upon further driving, the car (without the tune loaded yet) seems to want to take off now. The moment I ease up on the clutch it's like
"Come On let's go!"

Definitely feels smoother throughout the RPM band as well.
It does seem to have a bit of rev hang more so than normal. I am assuming the tune and reset of everything will correct that.

I am finishing my 3.91 install tonight/tomorrow and will load the tune and run it.

Spoiler alert
Might even make a surprise dyno run Saturday if all works out.

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Shawno72 · 04-21-2016, 10:15 AM

I can't wait for some more numbers

Kenny Camaro · 05-03-2016, 04:13 AM

Will, any new numbers on Camaro lfx's vmaxx vs. the 80? Gonna buy one of these, just wanna feel good about paying more for your 80.

5alive · 05-06-2016, 10:29 PM

Dude........nice car.

Kenny Camaro · 05-07-2016, 04:17 AM

Rock and roll brother!!

Kenny Camaro · 05-07-2016, 06:44 PM

Will, do you have any Impala fourum info on the 80mm vs. stock tb? Or Camaro stock against your 80? As I am currently stock tb and stock intake manifold and would be interested in gains against stock with non- ported intake. I do currently run a K+N cai.any info would be greatly appreciated. Thanks in advance. Ken

willoverkill · 05-08-2016, 01:20 AM

Hi Kenny, no new numbers to share, just the feedback I've gotten and posted about so far. Everything has shown a gain over the ported throttle body to varying extents!

The K&N is easy. I have the coupler required on my shelves and you'll see a dropdown menu on my site to add it to cart along with the throttle body for about $12.

djp · 05-08-2016, 06:53 AM

Will with this work with a CAI Intake?

derek1387 · 05-08-2016, 04:51 PM

Quote:

Originally Posted by djp

Will with this work with a CAI Intake?

It will now, after several months of waiting!

You will want the 3.5" 180* coupler from Aero Exhaust.

Kenny Camaro · 05-08-2016, 04:55 PM

Derek, any plans on dynoing with the E85 and the 80 setup?

04-20-2016, 07:08 PM	#477
derek1387 Drives: 2015 1LS Red V6 Join Date: Aug 2015 Location: St Joseph, MO Posts: 1,849	All i can say so far as i havent driven much yet is the throttle response is insane now. Cannot wait for the TPS to adjust, and then tune it! __________________ Sponsors: Overkill Motorsport BCS Auto JacFab Machining APDEG Dream Gear Mobile Audio Thanks to Will @ Overkill Motorsports, Jason @ JacFab, Jim @ Ohio Speed, Brandon at Dream Gear, and the boys at Randy Curnow Chevrolet 5th Gen V6 Performance Facebook Group

04-20-2016, 08:01 PM	#478
5alive Drives: 2013 1LT Join Date: Dec 2013 Location: Detriot Posts: 44	Dude........it's about time they sent you that tube, I don't think it took the Right Brothers that long to fly around the world....they did go around the world.... right...haha , look next time anyone needs tubes,intake parts, turbo fittings, nitrous fittings,check valves, pressure testing couplers.......check this place out .looks nice, good job!! http://www.siliconeintakes.com __________________ R/S Package, backup camara, Dual Exhaust Mode, 6spd manual, Sun Roof, K&N cai, Elite oil catch can, Gage Pack,80mm t/b, ported intake,and spacer JacFab,20% tint

04-20-2016, 08:33 PM	#479
camrytt Drives: 2017 ZL1 A10 Join Date: Sep 2014 Location: Raleigh, NC Posts: 592	No 3.5" one on there __________________ Current: 2017 ZL1 A10 previous: 2019 1SS A10 previous: '14 L99, CAI intake, vmax ported tb, e85 kit, stage 2 cnc heads, speed engineering long tubes, custom high flows, resonated x pipe, muffler delete, qtp cut outs, gpi ss3 vvt Cam, zl1 pump and injectors, fti triple disc, mayhem motorsports trans cooler and tune, ngk spark plugs +red msd wires, 3.91 gears. Past: '12 LFX, full bolt ons + E85, 302hp/267tq

04-20-2016, 08:41 PM	#480
5alive Drives: 2013 1LT Join Date: Dec 2013 Location: Detriot Posts: 44	True.....l guess it's not for everyone.....but it's worth a try....... __________________ R/S Package, backup camara, Dual Exhaust Mode, 6spd manual, Sun Roof, K&N cai, Elite oil catch can, Gage Pack,80mm t/b, ported intake,and spacer JacFab,20% tint

04-21-2016, 09:47 AM	#481
derek1387 Drives: 2015 1LS Red V6 Join Date: Aug 2015 Location: St Joseph, MO Posts: 1,849	Upon further driving, the car (without the tune loaded yet) seems to want to take off now. The moment I ease up on the clutch it's like "Come On let's go!" Definitely feels smoother throughout the RPM band as well. It does seem to have a bit of rev hang more so than normal. I am assuming the tune and reset of everything will correct that. I am finishing my 3.91 install tonight/tomorrow and will load the tune and run it. Spoiler alert Might even make a surprise dyno run Saturday if all works out. Sent from my iPhone using Tapatalk Sent from my iPhone using Tapatalk __________________ Sponsors: Overkill Motorsport BCS Auto JacFab Machining APDEG Dream Gear Mobile Audio Thanks to Will @ Overkill Motorsports, Jason @ JacFab, Jim @ Ohio Speed, Brandon at Dream Gear, and the boys at Randy Curnow Chevrolet 5th Gen V6 Performance Facebook Group

04-21-2016, 10:15 AM	#482
Shawno72 Drives: 2015 Black 2LT RS M6 Join Date: Aug 2015 Location: Cali Posts: 2,033	I can't wait for some more numbers __________________ Overkill tune/E85/80mm•CAI cold air intake w/my custom maf tube•Apex air scoop•JacFab ported intake/Extendolater•Vitesse•EE EX2 catch can•Innovate wideband•ARH HFC's•NPP exhaust•11386 xpipe•Brembos/cross drilled/slotted rotors•SS M/C•Pfadt 1.25 springs•1LE struts/sways/strut tower brace•BMR diff bush, trail arms/bush, adj toe links•My custom Tunnel brace•Hurst short throw shifter•JDP stage 1 clutch res•1LE steering wheel, shift boot•ZL1 rear diffuser/splash guards•GM splitter•Z/28 grille/flowtie/spoiler/wheels•GM performance pedals•"Chevrolet" door sills•10" Kicker sub•BigWorm overlays

05-03-2016, 04:13 AM	#483
Kenny Camaro Account Suspended Drives: 2013 1LT RS Camaro Join Date: Apr 2016 Location: Southeast Michigan Posts: 3,494	Will, any new numbers on Camaro lfx's vmaxx vs. the 80? Gonna buy one of these, just wanna feel good about paying more for your 80.

05-06-2016, 10:29 PM	#484
5alive Drives: 2013 1LT Join Date: Dec 2013 Location: Detriot Posts: 44	Dude........nice car. __________________ R/S Package, backup camara, Dual Exhaust Mode, 6spd manual, Sun Roof, K&N cai, Elite oil catch can, Gage Pack,80mm t/b, ported intake,and spacer JacFab,20% tint

05-07-2016, 04:17 AM	#485
Kenny Camaro Account Suspended Drives: 2013 1LT RS Camaro Join Date: Apr 2016 Location: Southeast Michigan Posts: 3,494	Rock and roll brother!!

05-07-2016, 06:44 PM	#486
Kenny Camaro Account Suspended Drives: 2013 1LT RS Camaro Join Date: Apr 2016 Location: Southeast Michigan Posts: 3,494	80 vs. stock tb Will, do you have any Impala fourum info on the 80mm vs. stock tb? Or Camaro stock against your 80? As I am currently stock tb and stock intake manifold and would be interested in gains against stock with non- ported intake. I do currently run a K+N cai.any info would be greatly appreciated. Thanks in advance. Ken

05-08-2016, 01:20 AM	#487
willoverkill Drives: Fast Join Date: Dec 2012 Location: Nanaimo BC Posts: 220	Hi Kenny, no new numbers to share, just the feedback I've gotten and posted about so far. Everything has shown a gain over the ported throttle body to varying extents! The K&N is easy. I have the coupler required on my shelves and you'll see a dropdown menu on my site to add it to cart along with the throttle body for about $12.

05-08-2016, 06:53 AM	#488
djp Drives: 2015 Camaro 1LT Join Date: Feb 2016 Location: Las Vegas Posts: 11 View My Garage	Will with this work with a CAI Intake?

05-08-2016, 04:55 PM	#490
Kenny Camaro Account Suspended Drives: 2013 1LT RS Camaro Join Date: Apr 2016 Location: Southeast Michigan Posts: 3,494	80mm Derek, any plans on dynoing with the E85 and the 80 setup?