What Did You Do To Your Camaro Today? - Page 1164 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

chasmanian · 05-08-2016, 07:40 PM

Wash, wax, and drive. Great weather.

bepah1 · 05-08-2016, 08:51 PM

Drove up to IronStone Vineyards for a Mother's Day break with the wife. Straightened out the Gold Country Foothills like nothing else!

jshaf · 05-08-2016, 10:40 PM

drove it to walmart, and when I say I drove it I mean like I stole it, DAMN this car is fun as hell

Welker2 · 05-08-2016, 11:49 PM

Took the wife on a surprise Mother's Day cruise to one of her (our) favorite get away spots (Laughlin, NV). She loved the drive; had a good dinner & a few drinks at Bubba Gump's before an evening of entertainment & fun

Tajefe Couple · 05-09-2016, 01:39 AM

Quote:

Originally Posted by premad

tajefe,

Might give this a try and if I do I will let you know how I make out. I see others have mentioned this as well. I assume I would have to cut out the existing X pipe and replace it with the one in the link.

Drone is so bad it vibrates the car in 6th gear. One thing I did notice about these MRT mufflers is the weld on the tips are not all they way around the pipe. Seems a little cheap to me when they retail over $500.

Yes I believe the X pipe is suppose to directly replace that H pipe we have now. That Magnaflow pipe is a weld in piece if I remember right. I think you could probably find a resonated Xpipe of you wanted it even quieter.
Mine is actually the SLP delete kit. It seems to be good quality, especially compared to some. I only get that kind of bad cabin drone on cold starts for about 15 seconds. However for that 15 seconds it sounds like my bass is turned up on the sub without the stereo on.
GL let me know how it goes.

chevyboy01438 · 05-09-2016, 07:44 AM

Dropped her off at the dealership. Have a hell of a rattle underneath the car. Really hoping it's just a heat shield coming loose.

Mr V · 05-09-2016, 02:14 PM

Painted my calipers following the DIY. After reading that the caliper bolts are TTY I order new ones from my local dealer. Many have reused the old ones but for $3-4 per bolt was worth the piece of mind for me.

gpskinzhut · 05-09-2016, 03:09 PM

Changed out the V6 brakes for some low-mileage Brembos; from backing plates to master and everything in between. Remembered just how much I hate drum brakes while putting the e-brake back together.

Trifecta23 · 05-09-2016, 04:14 PM

Quote:

Originally Posted by CCMADONNA

got Khaleesi's door dings PDRed.
Now imma order my American Racing wheels and some 305/35/20 Pirelli's for the rear.
Only thing i'm waiting for is my California Black and Yellow retro license plates!

Next project: Splitter or No Splitter?

Yes splitter

Pete M · 05-09-2016, 06:47 PM

Tried something different for my tail light.
If I still like in the morning, I'll do the passenger side...
Opinions?

davesnever · 05-09-2016, 07:20 PM

Quote:

Originally Posted by Pete M

Tried something different for my tail light.
If I still like in the morning, I'll do the passenger side...
Opinions?

Not bad, need to see the other side done and of course a full overview of the rear. Looks like an Anzo or Eagle Eye tailight sort of. Might look pretty good, I hope that's plasti-dip just in case.

Demon War Horse · 05-09-2016, 07:53 PM

A buddy made some custom black and red emblems for the sides. "War Horse" has been branded.

Pete M · 05-09-2016, 10:03 PM

Quote:

Originally Posted by davesnever

Not bad, need to see the other side done and of course a full overview of the rear. Looks like an Anzo or Eagle Eye tailight sort of. Might look pretty good, I hope that's plasti-dip just in case.

Yeah, its Plastidip. I tend to change my mind now and again....

DonM · 05-10-2016, 03:09 AM

Quote:

Originally Posted by Pete M

Tried something different for my tail light.
If I still like in the morning, I'll do the passenger side...
Opinions?

Looks good. I did something similar to one of my past cars, took the tail/brake lights from a big blob to a 2" horizontal line.

05-08-2016, 08:51 PM	#16284
bepah1 Drives: 2010 Camaro 2SS Bumblebee Join Date: Apr 2016 Location: Brentwood CA Posts: 26	IronStone trip Drove up to IronStone Vineyards for a Mother's Day break with the wife. Straightened out the Gold Country Foothills like nothing else! Attached Images

05-08-2016, 10:40 PM	#16285
jshaf Montani Semper Liberi Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010 Location: Masontown, WV Posts: 4,841	drove it to walmart, and when I say I drove it I mean like I stole it, DAMN this car is fun as hell __________________ Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint

05-08-2016, 11:49 PM	#16286
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	Took the wife on a surprise Mother's Day cruise to one of her (our) favorite get away spots (Laughlin, NV). She loved the drive; had a good dinner & a few drinks at Bubba Gump's before an evening of entertainment & fun Attached Images __________________

05-09-2016, 07:44 AM	#16288
chevyboy01438 Drives: 2010 Camaro 1SS Join Date: Mar 2015 Location: Iowa Posts: 536	Dropped her off at the dealership. Have a hell of a rattle underneath the car. Really hoping it's just a heat shield coming loose. __________________ Mod List: Perma-Grin, Darkened tail lights, ZL1 3rd break light, JW Motorsports LED side markers, American Authorities Window Louver, American Authority ZL1 bumper, 11/30/17 \| Club F1FTY

05-09-2016, 02:14 PM	#16289
Mr V Drives: 2011 VR SS Vert Join Date: Aug 2015 Location: Minneapolis Posts: 375	Brembos Painted my calipers following the DIY. After reading that the caliper bolts are TTY I order new ones from my local dealer. Many have reused the old ones but for $3-4 per bolt was worth the piece of mind for me. Attached Images

05-08-2016, 07:40 PM	#16283
chasmanian Drives: 2015 Camaro SS Join Date: Dec 2013 Location: Easton, PA Posts: 295 View My Garage	Wash, wax, and drive. Great weather.

05-09-2016, 03:09 PM	#16290
gpskinzhut Drives: 2020 Corvette Stingray Z51 Join Date: Aug 2011 Location: Knoxville, TN Posts: 1,982 View My Garage	Changed out the V6 brakes for some low-mileage Brembos; from backing plates to master and everything in between. Remembered just how much I hate drum brakes while putting the e-brake back together. __________________ 2020 Corvette 2LT Z51 2017 ZL1 A10: (SOLD) \|\| 2017 2SS M6: (SOLD) \|\| 2014 2LT Convertible: (SOLD) \|\| 2010 2LT M6 Supercharged:(SOLD) \|\| 1987 IROC-Z 5.0 M5: (SOLD)

05-09-2016, 06:47 PM	#16292
Pete M 9 Year USMC Vet Drives: 2014 1LT black on black Join Date: Nov 2015 Location: Farmington, NC Posts: 730 View My Garage	Tried something different for my tail light. If I still like in the morning, I'll do the passenger side... Opinions? Attached Images __________________ A lot of stuff done so far to make it look better and be more fun to drive.....

05-09-2016, 07:53 PM	#16294
Demon War Horse War Horse Pilot Drives: 2017 NFG 1SS 1LE Join Date: Jul 2014 Location: N.Texas Posts: 2,458 View My Garage	A buddy made some custom black and red emblems for the sides. "War Horse" has been branded. __________________ COTW 09/07/2015 - 2014 AGM 2SS/RS - RIP 6/01/17 2017 Nightfall Gray Metallic 1SS 1LE Born 5/17/17 - *Click Sig Pic below for for Demon War Horse 02 Build Thread* SigPic by Hazman

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM