What Did You Do To Your Camaro Today? - Page 1166 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Pete M · 05-12-2016, 10:16 PM

Quote:

Originally Posted by PalmerGA

Love the USMC. Retired 4+ years ago with 21 years Civil Service in support of them (+10 years w/ the Army). However... IMO, less is more. Love the badge but two would be too much. Keep it subtle. Semper Fi!

Thanks Palmer, I did the passenger side and really like the look...

Angrybird 12 · 05-12-2016, 10:50 PM

Quote:

Originally Posted by premad

Found some who put factory exhaust back on there Camaro, so I picked up a cat back system with and MRT V1 exhaust on it. I have to say, it creates major drone in the car at 55 mph. Need to research to see if the drone can be eliminated in anyway.

Solo makes adjustible J-pipes that will eliminate the drone.

BlazeNGlory · 05-13-2016, 03:00 PM

Replaced the OEM non-RS headlight bulbs to something much brighter for better visibility at night. Tried the popular Sylvania Silverstar zXe and Phillips X-tremeVision bulbs and, quite frankly, although an improvement, it's not as significant as I had hoped. But, definitely keepers.

Mr. Stacy · 05-13-2016, 03:09 PM

Quote:

Originally Posted by myold88

I ordered my Camaro new back in the Summer of '09. I was disappointed in the
polished wheel option I ordered. These chrome wheels are from www.calchrome.com.
I never could understand why these were not offered on the Camaro as they are offered
on GM trucks, Corvettes, etc. I'm old school, love a little bling.

drew peacock · 05-14-2016, 03:09 AM

cold and rainy here this morning
so i took the chance to remove and clean behind the wheels..i never drive in the rain but it still gets filthy behind the wheels..

Ace0751 · 05-14-2016, 11:00 AM

Yesterday after the bumper was repainted and dry we finally put the T4 splitter on and I love it even more than the standard gfx splitter. We also repainted the splitter to the color of the car. Also changed the oil while the car was still on jacks but we couldn't get the filter off because it was too tight so we might have to redo the oil. To anyone looking to replace the factory gfx splitter, by ready to fill some holes because it is riveted on.

CCMADONNA · 05-14-2016, 12:27 PM

Quote:

Originally Posted by Ace0751

Yesterday after the bumper was repainted and dry we finally put the T4 splitter on and I love it even more than the standard gfx splitter. We also repainted the splitter to the color of the car. Also changed the oil while the car was still on jacks but we couldn't get the filter off because it was too tight so we might have to redo the oil. To anyone looking to replace the factory gfx splitter, by ready to fill some holes because it is riveted on.

great job!

your pictures convinced me to do mine.

HELLsx · 05-14-2016, 01:41 PM

I posted the other day about having installed my new badges... And said id be back with pics!! So i am!

Here are the results!

HELLsx · 05-14-2016, 01:44 PM

Here's some more...

I know, black is a biatch to snap a pic of!! I never tought such a small mod would pull all the attention!!! Lol!! I get sooooo many questions because of these!! But the best is i really like the look. I think they should be GM issued. I mean, i know the flat hood is the 1LE's trademark... But i dont like it sooo. It should have a giveway other than that.

Now... Hesitating before ripping the hood wrap off and getting the air intake done in a Carbon fiber dip instead....

Malibu T · 05-14-2016, 02:17 PM

Well, I was planning to take advantage of this gorgeous day by throwing on some shorts, cranking up the radio, and trying out the $549 worth of detailing & paint correction products I ordered April 30th from Summit, Adam's, & Apex (total includes a new Porter Cable). Was just waiting for my Apex order to FINALLY arrive this morn with the three main Adam's products I've needed to get started...

Bulldog3071 · 05-14-2016, 04:12 PM

Had my new ZL1 wheels put on along with Eagle F1 tires

Sent from my iPhone using Tapatalk

8balldeluxe · 05-14-2016, 04:28 PM

Scoop and washer bottle relocated

Welker2 · 05-14-2016, 04:37 PM

Backed it & the Vette out and spent the morning and this afternoon cleaning, throwing 'stuff' out, reorganizing & rearranging the garage. Looks a lot better & there's definitely more room to get around. Next step is the floor ... but for now, it's Miller time

8balldeluxe · 05-14-2016, 04:41 PM

It's always Miller time

05-13-2016, 03:00 PM	#16313
BlazeNGlory Drives: 2011 Camaro 1LT Join Date: Jan 2015 Location: So Cal Posts: 216 View My Garage	Replaced the OEM non-RS headlight bulbs to something much brighter for better visibility at night. Tried the popular Sylvania Silverstar zXe and Phillips X-tremeVision bulbs and, quite frankly, although an improvement, it's not as significant as I had hoped. But, definitely keepers. __________________ Hotchkis Lowering Springs, Pfadt Balance Rear Sway Bar, BMR End Links, Cadillac ATS Front Brembo 4-Piston Brakes, VMAX Ported Throttle Body, VMAX Ice-olator, Volant Cold Air Intake, Magnaflow Resonated X-Pipe, Magnaflow Axle-Back Exhaust, JEGS Exhaust Cutouts, GM Strut Tower Brace, Hurst Comp Shifter, Heritage Front Grill, 3D Carbon Front Air Dam, T-Rex Lower Billet Grill, 3D Carbon Front Vendor Vents, 20x9 OEM Polished RS/SS Wheels Front & Rear

05-14-2016, 11:00 AM	#16316
Ace0751 GEN5 Detail Drives: 2011 Synergy Series 2SS Convertible Join Date: Sep 2014 Location: Northeast, OH Posts: 1,986	Yesterday after the bumper was repainted and dry we finally put the T4 splitter on and I love it even more than the standard gfx splitter. We also repainted the splitter to the color of the car. Also changed the oil while the car was still on jacks but we couldn't get the filter off because it was too tight so we might have to redo the oil. To anyone looking to replace the factory gfx splitter, by ready to fill some holes because it is riveted on. Attached Images __________________ Roto-Fab CAI, Borla ATAK Exhaust System, Stainless Power Headers, RX Performance Catch Can, ACS T4 Splitter, Oracle side markers, Dyno Tuned by RDP Motorsports

05-14-2016, 01:41 PM	#16318
HELLsx Drives: 2SS/RS 1LE Join Date: Mar 2016 Location: Montreal Posts: 161	I posted the other day about having installed my new badges... And said id be back with pics!! So i am! Here are the results! __________________ BOUGHT THE LAST avail. 2015 1LE in Canada!!! Signed March 3rd 2016. Shippig from British Columbia to Montreal for delivery. 2SS-RS-1LE. Exhaust (NPP), Recaro's(AYZ), Navigation, Heads UP display, Boston acoustic (UHQ), Rear view camera, Sun roof (CF5) ...(hey, it was there...), Opt Gas cap (VQL), Optionnal carpet mats (VYW), rear cargo net (W2D). RS package (WRS) / with HID lightning and fogs (T4F and T3N). Yep..... It was kinda loaded!! :-) but it was the last 2015 1LE in Canada. I wanted white.... I got BLACK!!!! Lol!!!

05-14-2016, 01:44 PM	#16319
HELLsx Drives: 2SS/RS 1LE Join Date: Mar 2016 Location: Montreal Posts: 161	Here's some more... I know, black is a biatch to snap a pic of!! I never tought such a small mod would pull all the attention!!! Lol!! I get sooooo many questions because of these!! But the best is i really like the look. I think they should be GM issued. I mean, i know the flat hood is the 1LE's trademark... But i dont like it sooo. It should have a giveway other than that. Now... Hesitating before ripping the hood wrap off and getting the air intake done in a Carbon fiber dip instead.... __________________ BOUGHT THE LAST avail. 2015 1LE in Canada!!! Signed March 3rd 2016. Shippig from British Columbia to Montreal for delivery. 2SS-RS-1LE. Exhaust (NPP), Recaro's(AYZ), Navigation, Heads UP display, Boston acoustic (UHQ), Rear view camera, Sun roof (CF5) ...(hey, it was there...), Opt Gas cap (VQL), Optionnal carpet mats (VYW), rear cargo net (W2D). RS package (WRS) / with HID lightning and fogs (T4F and T3N). Yep..... It was kinda loaded!! :-) but it was the last 2015 1LE in Canada. I wanted white.... I got BLACK!!!! Lol!!!

05-14-2016, 02:17 PM	#16320
Malibu T Barbie Aficionado Drives: 2013 2SS/RS Join Date: Aug 2014 Location: Under the moonlight... the serious moonlight, NC Posts: 191	Well, I was planning to take advantage of this gorgeous day by throwing on some shorts, cranking up the radio, and trying out the $549 worth of detailing & paint correction products I ordered April 30th from Summit, Adam's, & Apex (total includes a new Porter Cable). Was just waiting for my Apex order to FINALLY arrive this morn with the three main Adam's products I've needed to get started... Attached Images __________________

05-14-2016, 03:09 AM	#16315
drew peacock Banned Drives: 2012 2SS INFERNO ORANGE Join Date: Apr 2015 Location: sweden Posts: 1,841	cold and rainy here this morning so i took the chance to remove and clean behind the wheels..i never drive in the rain but it still gets filthy behind the wheels..

05-14-2016, 04:12 PM	#16321
Bulldog3071 Drives: 2010 Camaro 2SS/RS LS3 Join Date: Oct 2013 Location: Kernersville, NC Posts: 930 View My Garage	Had my new ZL1 wheels put on along with Eagle F1 tires Sent from my iPhone using Tapatalk

05-14-2016, 04:28 PM	#16322
8balldeluxe Drives: 2010 Camaro SS Victory Red Join Date: Apr 2015 Location: Rosenberg, Texas Posts: 780	Scoop and washer bottle relocated __________________ Speed Engineering Headers w/ Texas Speed HFC's ~ Flowmaster 2 1/2" cat back w/Flowmaster Super 10's ~ Cold Air Inductions Intake w/ Scoop and WW relocate ~ VMAX CNC Spiral PTB ~ Cross Drilled and Slotted Rotors w/Hawk pads ~ ZL1 Spoiler ~ SCTX4 RDP Tuned

05-14-2016, 04:37 PM	#16323
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	Backed it & the Vette out and spent the morning and this afternoon cleaning, throwing 'stuff' out, reorganizing & rearranging the garage. Looks a lot better & there's definitely more room to get around. Next step is the floor ... but for now, it's Miller time Attached Images __________________

05-14-2016, 04:41 PM	#16324
8balldeluxe Drives: 2010 Camaro SS Victory Red Join Date: Apr 2015 Location: Rosenberg, Texas Posts: 780	It's always Miller time __________________ Speed Engineering Headers w/ Texas Speed HFC's ~ Flowmaster 2 1/2" cat back w/Flowmaster Super 10's ~ Cold Air Inductions Intake w/ Scoop and WW relocate ~ VMAX CNC Spiral PTB ~ Cross Drilled and Slotted Rotors w/Hawk pads ~ ZL1 Spoiler ~ SCTX4 RDP Tuned

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM