You are browsing camaro5 
 |
|
06-04-2016, 03:30 PM
|
#1 |
|
Account Suspended
Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011
Location: Oxnard. CA
Posts: 1,747
|
Z/28 Brake lines Help Needed!!!
Hello I'm in need of help .
I own a 2013 1LE and just bought a complete set of the Z/28 Brembo Carbon Ceramic Brakes (Rotors, Calipers, Brake pads)they come with brake lines but it looks like they cut the brake lines. My question is Are there any aftermarket companies making upgraded brake likes for the Z/28 like flex lines, braided stainless lines etc? Will I still be able to re use the current lines ? And if not how much are the 4 brake lines ? |
|
|
|
06-04-2016, 03:32 PM
|
#2 |
|
Account Suspended
Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011
Location: Oxnard. CA
Posts: 1,747
|
One more
|
|
|
|
|
06-04-2016, 04:04 PM
|
#3 |
|
Jumanji
Drives: '14 Z/28 - AGM - No A/C Join Date: Mar 2014
Location: Alaska
Posts: 1,693
|
Any details about the car this full set came off of? If you dont mind me asking, how much did they run you?
. As of now, there is not an aftermarket company doing lines. I am sure you can pick up a new set from the dealership or piece together a set via Jegs.
__________________
Keeper of the 5th Gen Z/28 Registry.
Registry Facebook. Follow: @5th_gen_z28_registry I track wrecked Z/28s Total lost -41 |
|
|
|
|
06-04-2016, 04:46 PM
|
#4 | |
 
|
Quote:
http://www.hose-man.com
__________________
 "The walls are white, the track is grey, the grass is green, and the sky is blue... your job is to keep them all where they belong." - Johnny Rutherford |
|
|
|
|
|
06-05-2016, 11:45 AM
|
#5 |
|
2013 Camaro SS1LECTSVZ28
Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 2,440
|
The Z/28 calipers front and rear are similar /same castings to the ZL1/Corvette Z06 6 piston calipers which use a longer front brake line than your SS/1LE as the line attaches near the bottom of the caliper when mounted on the car.
On the front they cut the metal or body side brake line. From the picture you can reuse the front. The rear line, for some dumb reason, they cut the rubber line. The rears are a 4 piston cast caliper similar to all ZL1/SS rear, your stock SS/1LE lines "should" work. This should be an easy and straight forward swap. Matt
__________________
|
|
|
|
|
|
|
|
 |
|
|
