What Did You Do To Your Camaro Today? - Page 1194 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CCMADONNA · 06-23-2016, 09:29 PM

Mr. Stacy, don't be a tease!!!
Pictures, please!!!

Mr. Stacy · 06-23-2016, 11:03 PM

Opps. sorry.

Here is a couple shots with the new 1" spacers. I think it looks better and actually feels like the car has a bit more grip!

Now I need to lower it about an inch.

Name: Spacer.jpg
Views: 1133
Size: 491.0 KB

Name: Spacer2.jpg
Views: 977
Size: 420.6 KB

Here is a link to the item. These are HUBCENTRIC and CNC Machined. Meaning they are NOT cheap cast aluminum. That being said, the first set I got had two that were cosmetically damaged because of how they shipped them (flat rate box). They immediately sent me 4 more, but packed almost exactly the same way and yup, two were damaged. I offered those to Ghosted, but if he doesn't want them they will be up for grabs in the classifieds for the cost of shipping.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Shawno72 · 06-24-2016, 08:42 AM

Quote:

Originally Posted by Mr. Stacy

Opps. sorry.

Here is a couple shots with the new 1" spacers. I think it looks better and actually feels like the car has a bit more grip!

Now I need to lower it about an inch.

Attachment 803480

Attachment 803481

Here is a link to the item. These are HUBCENTRIC and CNC Machined. Meaning they are NOT cheap cast aluminum. That being said, the first set I got had two that were cosmetically damaged because of how they shipped them (flat rate box). They immediately sent me 4 more, but packed almost exactly the same way and yup, two were damaged. I offered those to Ghosted, but if he doesn't want them they will be up for grabs in the classifieds for the cost of shipping.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I'm going to installing my spacers today as well. I'm lowered already so it really shows lol.

Stormcloak · 06-24-2016, 10:02 AM

Went in for an alignment, as the drivers side front was wearing on the outside . We'll see how it goes.

wrtowman · 06-24-2016, 10:40 AM

unboxed my stage 2 ADM kit with used blower/upgraded pulley.

5thGenOwner · 06-24-2016, 10:40 AM

Quote:

Originally Posted by Mr. Stacy

Opps. sorry.

Here is a couple shots with the new 1" spacers. I think it looks better and actually feels like the car has a bit more grip!

Now I need to lower it about an inch.

Here is a link to the item. These are HUBCENTRIC and CNC Machined. Meaning they are NOT cheap cast aluminum. That being said, the first set I got had two that were cosmetically damaged because of how they shipped them (flat rate box). They immediately sent me 4 more, but packed almost exactly the same way and yup, two were damaged. I offered those to Ghosted, but if he doesn't want them they will be up for grabs in the classifieds for the cost of shipping.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Looks good! Looks the way it should have come from the factory. And it sounds like that vendor could save themselves some money by using better shipping methods.

CCMADONNA · 06-24-2016, 10:56 AM

nice Dude!!!

Mr. Stacy · 06-24-2016, 12:07 PM

Quote:

Originally Posted by Shawno72

I'm going to installing my spacers today as well. I'm lowered already so it really shows lol.

Looks REALLY sharp! Subtle changes make all the difference sometimes.

Mr. Stacy · 06-24-2016, 12:09 PM

Quote:

Originally Posted by 5thGenOwner

Looks good! Looks the way it should have come from the factory. And it sounds like that vendor could save themselves some money by using better shipping methods.

Thanks! I think it fills out the wheel wells MUCH better.

I know! What is with the crappy packing?

Shawno72 · 06-24-2016, 12:10 PM

Quote:

Originally Posted by Mr. Stacy

Looks REALLY sharp! Subtle changes make all the difference sometimes.

Thank you! It will ride me over until the new wheels show up. Then I'll be like the bottom pic

Mr. Stacy · 06-24-2016, 12:10 PM

Quote:

Originally Posted by CCMADONNA

nice Dude!!!

Mr. Stacy · 06-24-2016, 12:13 PM

Quote:

Originally Posted by Shawno72

Thank you! It will ride me over until the new wheels show up. Then I'll be like the bottom pic

Sweet!

Mr. Stacy · 06-24-2016, 12:33 PM

Quote:

Originally Posted by wrtowman

unboxed my stage 2 ADM kit with used blower/upgraded pulley.

That's amazing! How does all that fit under the hood!?

Spec · 06-24-2016, 02:53 PM

Quote:

Originally Posted by Pete M

I didn't see it in an earlier post
( might just be blind in my old age)
Go a link to your seat cover source?

My bad for the delay... I got them on Amazon. Just search IGGEE (year) Camaro.

06-23-2016, 09:29 PM	#16703
CCMADONNA Drives: 2014 SW 2SS/RS Join Date: Jun 2014 Location: So Cal Posts: 1,681 View My Garage	Mr. Stacy, don't be a tease!!! Pictures, please!!! __________________ 2014 2SS/RS VERT L99 SUMMIT WHITE AIRAID CAI BORLA ATAK CAT-BACK EXHAUST ELITE ENGINEERING CATCH-CAN RANGE AFM-DELETE MODULE HUPER OPTIK 40 CHROME PEDALS PREMIUM FLOOR MATS PREMIUM CARGO MAT DEDICATED 32GB iPHONE HD[/I][/B][IMG][/IMG]

06-23-2016, 11:03 PM	#16704
Mr. Stacy El Duderino Drives: 2011 2LTRS Convertible Join Date: Jan 2016 Location: Seattle Posts: 2,194 View My Garage	Opps. sorry. Here is a couple shots with the new 1" spacers. I think it looks better and actually feels like the car has a bit more grip! Now I need to lower it about an inch. Here is a link to the item. These are HUBCENTRIC and CNC Machined. Meaning they are NOT cheap cast aluminum. That being said, the first set I got had two that were cosmetically damaged because of how they shipped them (flat rate box). They immediately sent me 4 more, but packed almost exactly the same way and yup, two were damaged. I offered those to Ghosted, but if he doesn't want them they will be up for grabs in the classifieds for the cost of shipping. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 __________________ I bowl. Drive around. The occasional acid flashback.

06-24-2016, 10:02 AM	#16706
Stormcloak slower than you Drives: 2012 C6 Z06 Join Date: Oct 2015 Location: NY Posts: 668 View My Garage	Went in for an alignment, as the drivers side front was wearing on the outside . We'll see how it goes. __________________

06-24-2016, 10:40 AM	#16707
wrtowman Drives: 2011 Camaro 1SS Join Date: Feb 2016 Location: Warner Robins Ga Posts: 778	unboxed my stage 2 ADM kit with used blower/upgraded pulley. __________________ 2011 SGM Camaro 1SS/RS A6 - Vengeance Racing built/tuned. 590RWHP/560RWTQ, ADM LSA Conversion, 2.5 Grip-Tec, ZL1 fuel pump, ADM FPCM, FIC1000, VRPD2 Cam and LS3 Conversion with all the internal goodies, American Racing 1 7/8 Headers, no cats, SW Retro Cat Back, ADM Intake, AFCO HX, Varimax Pump, Rotofab Reservoir, B&M Transmission Cooler, VMAX TB, Elite Engineering CC, BMR LCAs, Trailing Arms, Toe Rods, DSS 1000hp axles, ZL1 Bumper and Sideskirts, Night Owl Halos, Matte Black 20" Rohana RC-22 with 20x10-275s/20x11-315s, R1 Concept Premier Drilled/Slotted Rotors, Hawk Ceramic Pads.

06-24-2016, 10:56 AM	#16709
CCMADONNA Drives: 2014 SW 2SS/RS Join Date: Jun 2014 Location: So Cal Posts: 1,681 View My Garage	nice Dude!!! __________________ 2014 2SS/RS VERT L99 SUMMIT WHITE AIRAID CAI BORLA ATAK CAT-BACK EXHAUST ELITE ENGINEERING CATCH-CAN RANGE AFM-DELETE MODULE HUPER OPTIK 40 CHROME PEDALS PREMIUM FLOOR MATS PREMIUM CARGO MAT DEDICATED 32GB iPHONE HD[/I][/B][IMG][/IMG]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM