2014 Heat extractor on a 2010 hood - Page 56 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RichSS2006 · 05-03-2016, 05:13 PM

You may want to call SLP and ask them. Also check ACS Composite. Think they have one specifically for 2010-2013 with a SC.

Demonns · 05-13-2016, 12:59 PM

Hi guys! Tell me please, it will come up on the Camaro RS 2010 3,6 ?
http://www.slponline.com/product/620...extractor.html

RichSS2006 · 05-14-2016, 07:45 PM

Quote:

Originally Posted by Demonns

Hi guys! Tell me please, it will come up on the Camaro RS 2010 3,6 ?
http://www.slponline.com/product/620...extractor.html

If your asking whether the Heat Extractor will work on a Camaro with a V6...Yes it will. Several have posted within this thread. Specifically see page 6 of this thread. What has changed over the years is the different methods of mounting the Heat Extractor and Rain Tray on early hoods.

matthew9440 · 05-19-2016, 12:11 PM

that's awesome! great job!

blake-b · 06-03-2016, 04:30 PM

There is a Holley Hi Ram under there. With the extractor in place, the intake is hitting the back brace that holds the extractor in. It caused two small protrusion marks you can see on the top of the hood. If you zoom in on the picture, you can see the passenger side one. It is also causing the extractor to flex a little as it was sitting more flush.

I should have been more careful (obviously!) when closing the hood the first time I put it back on and checked for clearance. What's done is done!

Just be careful if using a Hi Ram or other tall intake AND the extractor!

ETA: I took a look at it today. It isn't the Hi Ram causing the issue, it is because I tightened the rear bolts too much and the brace had a narrow contact area. I reshaped the brace but the marks are permanent.

chargerfan2 · 06-07-2016, 02:12 AM

Quote:

Originally Posted by thkfast

In the words of Goose from Top Gun, "Gutsiest move I've ever seen."

That looks great and nice write up!

It was actually Slider talking to Maverick. But you're right, I would not have the balls to cut into my hood.

clarkkent · 06-07-2016, 11:41 AM

Quote:

Originally Posted by chargerfan2

It was actually Slider talking to Maverick. But you're right, I would not have the balls to cut into my hood.

musclecargirl · 07-02-2016, 10:54 PM

Looks like p/n 23180572 (water tray/deflector) is discontinued. I could only find p/n 23213078 (2015 deflector).

clarkkent · 07-03-2016, 08:18 PM

Quote:

Originally Posted by musclecargirl

Looks like p/n 23180572 (water tray/deflector) is discontinued. I could only find p/n 23213078 (2015 deflector).

Yep I just ordered my parts and I got the 23213078

Darren M · 07-12-2016, 01:57 PM

Have read every page, a couple of times over and I guess I missed it. Could someone please post the outside dimensions of the heat extractor? Obviously it is a rectangle, so that middle point would be really nice to have too. I'm needing to see if this works on a hood before ordering.
Thanks!
Darren

LT1Zob · 07-21-2016, 01:04 PM

you guys are awesome. I'll post my pics when I'm done

Davidd_SS · 07-21-2016, 03:53 PM

Finished mine up a couple of month ago. so wicked looking..
I took the extra time to trim everything perfectly to make it sit as flush as possible. Its being held on by 3m extra strength double sided tape. the dip tray is being held on to the underside webbing of the hoot by high heat plastic retainers. I take the dip tray off and track days and at 117mph the 3m holds it down

Angrybird 12 · 07-21-2016, 07:33 PM

Since I already have the ACS insert on my Camaro i was thinking I might want to try to install one of these on my 2007 Colorado hood. Do you think it would fit?
Here is my truck,

olblue75 · 07-21-2016, 07:52 PM

You can make anything fit with patients....

05-03-2016, 05:13 PM	#771
RichSS2006 Drives: 2010 2SSRS Join Date: Dec 2012 Location: South Carolina Posts: 506 View My Garage	You may want to call SLP and ask them. Also check ACS Composite. Think they have one specifically for 2010-2013 with a SC. __________________ No longer stock, but oooh so much more fun!

05-19-2016, 12:11 PM	#774
matthew9440 Drives: 2010 Camaro 2SS/RS Join Date: Aug 2012 Location: DuBois, PA Posts: 1,038 View My Garage	that's awesome! great job! __________________

06-03-2016, 04:30 PM	#775
blake-b Drives: 2009 ZR1 Join Date: May 2010 Location: KCMO Posts: 3,205	There is a Holley Hi Ram under there. With the extractor in place, the intake is hitting the back brace that holds the extractor in. It caused two small protrusion marks you can see on the top of the hood. If you zoom in on the picture, you can see the passenger side one. It is also causing the extractor to flex a little as it was sitting more flush. I should have been more careful (obviously!) when closing the hood the first time I put it back on and checked for clearance. What's done is done! Just be careful if using a Hi Ram or other tall intake AND the extractor! ETA: I took a look at it today. It isn't the Hi Ram causing the issue, it is because I tightened the rear bolts too much and the brace had a narrow contact area. I reshaped the brace but the marks are permanent. Attached Images Last edited by blake-b; 06-06-2016 at 04:43 AM.

07-12-2016, 01:57 PM	#780
Darren M Drives: SHO Join Date: Jul 2016 Location: DFW Posts: 7	Have read every page, a couple of times over and I guess I missed it. Could someone please post the outside dimensions of the heat extractor? Obviously it is a rectangle, so that middle point would be really nice to have too. I'm needing to see if this works on a hood before ordering. Thanks! Darren Last edited by Darren M; 07-12-2016 at 02:30 PM. Reason: Typos

07-21-2016, 01:04 PM	#781
LT1Zob Drives: 23 LT1 / 19 Z06 / after 6 5th gens Join Date: Jan 2014 Location: MI Posts: 2,008 View My Garage	you guys are awesome. I'll post my pics when I'm done __________________ "Make yourself sheep and the wolves will eat you"

05-13-2016, 12:59 PM	#772
Demonns Drives: 2010 2LT/RS Join Date: Apr 2015 Location: Belarus Posts: 3	Hi guys! Tell me please, it will come up on the Camaro RS 2010 3,6 ? http://www.slponline.com/product/620...extractor.html

07-02-2016, 10:54 PM	#778
musclecargirl Drives: 2010 2SS CGM w/IO Interior Join Date: Jun 2009 Location: Fayetteville, GA Posts: 290	Looks like p/n 23180572 (water tray/deflector) is discontinued. I could only find p/n 23213078 (2015 deflector).

07-21-2016, 03:53 PM	#782
Davidd_SS Drives: LSX FTW Join Date: Feb 2016 Location: Florida Posts: 526	Finished mine up a couple of month ago. so wicked looking.. I took the extra time to trim everything perfectly to make it sit as flush as possible. Its being held on by 3m extra strength double sided tape. the dip tray is being held on to the underside webbing of the hoot by high heat plastic retainers. I take the dip tray off and track days and at 117mph the 3m holds it down Attached Images

07-21-2016, 07:33 PM	#783
Angrybird 12 7 year Cancer Survivor! Drives: 17 Cruze RS, 07 G6 GT, 99 Astro Join Date: Dec 2007 Location: East Tennessee Posts: 21,547	Since I already have the ACS insert on my Camaro i was thinking I might want to try to install one of these on my 2007 Colorado hood. Do you think it would fit? Here is my truck, Attached Images __________________ Cancer's a bitch! Enjoy life while you can! LIVE, LOVE, DRIVE... The Bird is the word!

07-21-2016, 07:52 PM	#784
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,070	You can make anything fit with patients.... __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.