OEM windshield part#??? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

backtotintops · 07-19-2016, 07:56 PM

I need a new windshield (big crack and a few stone pock marks from Palmer) and my dealer, the high end body shop that is doing the replacement and one of the top internet parts suppliers ALL can't figure out the exact part number??? Apparently there are 2 windshields for the Z/28 referenced both to the model and actual vin.

This was the best response from the internet parts supplier so far:

"You would have to look at the windshield to determine which one is need.
22909445 – 1st design - For vehicles built without door lock receiver bracket
23208020 – 2nd design – For vehicles built with door lock receiver bracket

From your description I would say you have the 2nd design."

Then the body shop kept asking if I had a rain sensor and remote start? I think that box in the upper part of the windshield is for that?...does the Z have these and they are not hooked up?

Anybody know for sure the correct part #? Is that little box the "door lock reciever bracket"? Seems like 8020?

tia

69L48Z27 · 07-19-2016, 08:42 PM

They should have a break in VIN number to reference. Maybe not?

chip4 · 07-19-2016, 10:48 PM

Don't know if this helps:
Z/28's don't have remote start (due to 6spd manual). and they don't have rain sensing wipers -wiper stalk does not have "Auto"
That 1st PN shows 2010-2013 Camaros in gmpartsdirect.com and gmpartsnow.com
The 2nd one shows 2014-15 Camaros, however none of those online parts places show specifically for a Z/28.
-That box next to the mirror -I always thought this was the OnStar antenna, I suppose there could be a Fob receiver in there as well.

Associated -maybe you could attempt to contact the OP on this thread:
http://www.camaro5.com/forums/showth...ght=windshield

LSX Camaro · 07-19-2016, 10:52 PM

Why are you asking the forum for a very specific part number and not a GM dealer with your VIN number?

backtotintops · 07-20-2016, 07:06 AM

As I said I already asked a dealer, body shop and online gm parts place and using my vin amazingly there are 2.

Z Beast · 07-20-2016, 11:11 AM

This has come up before http://www.camaro5.com/forums/showth...ght=WINDSHIELD although I have not seen BRT3 on the forum in awhile you might try and PM him and see if he can help you out.

ron123 · 07-20-2016, 12:06 PM

Quote:

Originally Posted by backtotintops

As I said I already asked a dealer, body shop and online gm parts place and using my vin amazingly there are 2.

What does the Pilkington stamp info show on the bottom corner of your OEM windshield?

rickwelch69 · 07-20-2016, 12:11 PM

z28 has the thinner windshield to save weight

Nick S · 07-20-2016, 12:21 PM

Quote:

Originally Posted by rickwelch69

z28 has the thinner windshield to save weight

I believe only the rear window glass is thinner, The front glass thickness was not changed. Probably due to safety and strength issues for surviving debris impacts.

69L48Z27 · 07-20-2016, 08:43 PM

Quote:

Originally Posted by Nick S

I believe only the rear window glass is thinner, The front glass thickness was not changed. Probably due to safety and strength issues for surviving debris impacts.

you nailed it!

2015Z28 · 07-23-2016, 04:12 PM

We replaced our windshield while doing the Cage and Dry Carbon Roof. We use the front glass with the door lock receiver. They only pulled up one with our VIN??

07-19-2016, 07:56 PM	#1
backtotintops Drives: 14 Z/28 0# Join Date: May 2013 Location: NY Posts: 773	OEM windshield part#??? I need a new windshield (big crack and a few stone pock marks from Palmer) and my dealer, the high end body shop that is doing the replacement and one of the top internet parts suppliers ALL can't figure out the exact part number??? Apparently there are 2 windshields for the Z/28 referenced both to the model and actual vin. This was the best response from the internet parts supplier so far: "You would have to look at the windshield to determine which one is need. 22909445 – 1st design - For vehicles built without door lock receiver bracket 23208020 – 2nd design – For vehicles built with door lock receiver bracket From your description I would say you have the 2nd design." Then the body shop kept asking if I had a rain sensor and remote start? I think that box in the upper part of the windshield is for that?...does the Z have these and they are not hooked up? Anybody know for sure the correct part #? Is that little box the "door lock reciever bracket"? Seems like 8020? tia __________________ "PTM11" Search & Destroy

07-19-2016, 10:52 PM	#4
LSX Camaro Master ASE, GM, LSX Tech. Drives: 2010 Camaro SS Join Date: Oct 2012 Location: Austin, TX Posts: 1,034	Why are you asking the forum for a very specific part number and not a GM dealer with your VIN number? __________________ 2010 2SSRS A6, Custom Pat G. Cam, WCCH Cylinder Heads, Kooks Headers/Exhaust, BTR Valvetrain, Fluidampr 25% UDP, All Engine ARP bolts, Flex-a-lite radiator/Trans cooler, Yank converter, PFADT Suspension, ADM Race Intake/Scoop, Torq tow hook, CFD auto shifter, Dynojet AFR gauge, Aeroforce scan gauge, Brake Performance rotors/pads Prothane bushings, ZL1 wheels, spoiler, Z/28 wickerbill, 1LE Aero/Suspension Package, Anderson Composites COPO Carbon Fiber Hood, LED lighting, Elite Catch Can, Improved Racing oil pan baffle, crank scraper, windage tray 480 RWHP 452 RWTQ + Nitrous Express 150 Shot

07-20-2016, 07:06 AM	#5
backtotintops Drives: 14 Z/28 0# Join Date: May 2013 Location: NY Posts: 773	As I said I already asked a dealer, body shop and online gm parts place and using my vin amazingly there are 2. __________________ "PTM11" Search & Destroy

07-20-2016, 11:11 AM	#6
Z Beast Drives: 2014 Z/28 Ashen Grey Metallic Join Date: Aug 2014 Location: SoCal Posts: 166 View My Garage	This has come up before http://www.camaro5.com/forums/showth...ght=WINDSHIELD although I have not seen BRT3 on the forum in awhile you might try and PM him and see if he can help you out. __________________ "The walls are white, the track is grey, the grass is green, and the sky is blue... your job is to keep them all where they belong." - Johnny Rutherford

07-19-2016, 08:42 PM	#2
69L48Z27 Drives: 2015 Z/28; 1969 Camaro SS Join Date: Nov 2015 Location: York, PA Posts: 810	They should have a break in VIN number to reference. Maybe not?

07-19-2016, 10:48 PM	#3
chip4 Drives: 2015 Z/28 Silver #713 Join Date: Feb 2016 Location: Gilbert AZ Posts: 151	Don't know if this helps: Z/28's don't have remote start (due to 6spd manual). and they don't have rain sensing wipers -wiper stalk does not have "Auto" That 1st PN shows 2010-2013 Camaros in gmpartsdirect.com and gmpartsnow.com The 2nd one shows 2014-15 Camaros, however none of those online parts places show specifically for a Z/28. -That box next to the mirror -I always thought this was the OnStar antenna, I suppose there could be a Fob receiver in there as well. Associated -maybe you could attempt to contact the OP on this thread: http://www.camaro5.com/forums/showth...ght=windshield

07-20-2016, 12:11 PM	#8
rickwelch69 Drives: 2016 1LT RS Turbo 4 Join Date: Jun 2014 Location: Glendale, AZ 85301 Posts: 155	z28 has the thinner windshield to save weight

07-23-2016, 04:12 PM	#11
2015Z28 Drives: 2015 Z28 #516 Join Date: Jun 2015 Location: San Marcos, CA Posts: 62	We replaced our windshield while doing the Cage and Dry Carbon Roof. We use the front glass with the door lock receiver. They only pulled up one with our VIN??