DIY Pinstripe the outer edge of your Wheels - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Need4speed_motorsports · 07-22-2014, 03:16 PM

Looks really nice, I would never think thats aftermarket it look OEM

desieng · 07-22-2014, 03:38 PM

Quote:

Originally Posted by nightrider28

Is it necessary to get a pinstripe applicator so it's straight?

Nope not required... If you take your time you can get them perfectly straight... Just apply a little bit at a time and try not to let the other end stick to anything else.
The ones I ordered (think they are the same as OP) were only so long so it took two or three to cover all the way around the rim. I got the top half of the rim done, moved the vehicle slightly to make it easier for the other half.

vroomapunk · 07-23-2014, 10:48 AM

Yeah, just do it by hand, do the top half of the rim, move the car, do the other half.

Adam63impala · 07-11-2016, 09:34 PM

Going to try this soon instead of having my PC guy do this when he PC my wheels spokes gunmetal and the lip black !

Adam63impala · 07-11-2016, 09:47 PM

Did y'all not get a lot of air bubbles?

Libertypilot · 07-15-2016, 02:13 PM

I guess I can't do this with these wheels, huh? Maybe in sections on the inside of the rim? Just cut the vinyl pieces to fit? Is that too much?

Adam63impala · 07-22-2016, 02:37 PM

I'd say it's worth a try for 10 bucks ! LibertyPilot

07-23-2014, 10:48 AM	#73
vroomapunk [COTW 5/12/14] Drives: 2012 CRT NF Cammed 2SS/RS For Sale Join Date: Oct 2011 Location: NOLA Posts: 6,115 View My Garage	Yeah, just do it by hand, do the top half of the rim, move the car, do the other half. __________________

07-15-2016, 02:13 PM	#76
Libertypilot Drives: 2013 Silver Ice Metallic Join Date: Aug 2013 Location: Clinton NJ Posts: 474	I guess I can't do this with these wheels, huh? Maybe in sections on the inside of the rim? Just cut the vinyl pieces to fit? Is that too much? Attached Images __________________

07-22-2014, 03:16 PM	#71
Need4speed_motorsports Drives: 2016 Camaro SS Join Date: Apr 2014 Location: Glendale, CA Posts: 4,656 View My Garage	Looks really nice, I would never think thats aftermarket it look OEM

07-11-2016, 09:34 PM	#74
Adam63impala Drives: 63' chevy impalaSS , 12'Cam89'Cam Join Date: Feb 2013 Location: Memphis, TN, to Brunswick, GA Posts: 301	Going to try this soon instead of having my PC guy do this when he PC my wheels spokes gunmetal and the lip black !

07-11-2016, 09:47 PM	#75
Adam63impala Drives: 63' chevy impalaSS , 12'Cam89'Cam Join Date: Feb 2013 Location: Memphis, TN, to Brunswick, GA Posts: 301	Did y'all not get a lot of air bubbles?

07-22-2016, 02:37 PM	#77
Adam63impala Drives: 63' chevy impalaSS , 12'Cam89'Cam Join Date: Feb 2013 Location: Memphis, TN, to Brunswick, GA Posts: 301	I'd say it's worth a try for 10 bucks ! LibertyPilot