07-28-2016, 12:13 PM | #1 |
Drives: 2014 2SS/RS LS3 Red Hot Join Date: May 2016
Location: AZ
Posts: 11
|
SPOILER REMOVAL
I received a z28 spoiler and just wondered if it is necessary to use a heat gun/hairdryer to remove the stock spoiler on a 2014 Camaro SS?
Sent from my iPhone using Tapatalk |
07-28-2016, 12:15 PM | #2 |
Drives: 2016 camaro 1SS Join Date: Jun 2013
Location: Miami
Posts: 350
|
Just let the car out in the sun for a few hours before removing it should be fine.
__________________
.
2016 BLK Camaro 1SS/LT1 M6: NPP | black front/rear bowtie | Blacked out taillights 2011 IOM Camaro 1SS/RS LS3: Stainless works 1 7/8" LT headers w/ Offroad pipes | TSP Cam 235/239 on a 112 | Powerbound 25% UD Pulley Roto-Fab Cold Air Intake | SW Retro Chambered Catback Exhaust | VMax Ported TB | Hurst Short Throw Shifter Trunnion upgrade | LSA Oil Pump | BMR 1.25 Spings | R1 Concept d/s Rotors Tuned by Lashway Motorsports - 501 Hp 430 ft-lb |
07-28-2016, 12:17 PM | #3 |
The BBOMG fill-in husband
Drives: 2015 2SS/RS 1LE AKA V1LE Join Date: Aug 2010
Location: Elmira, NY
Posts: 4,461
|
Be prepared to see the messed up paint or lack thereof once you take it off
__________________
UPSTATE C5 MEMBER
|
07-28-2016, 12:42 PM | #4 |
Drives: C6 Corvette Join Date: Sep 2013
Location: Tampa, FL
Posts: 1,264
|
no you don't..or at least I didn't. unscrewed all 6 bolts and the spoiler came right off.
__________________
2008 C6 m6. Carbon creations front/rear carbon fiber wodebody fenders. Carbon fiber hood carbon fiber roof hoop carbon fiber zr1 extreme spoiler. NW 102mm tb. Ported intake manifold. Cometic .040 head gaskets. LG motorsports G6x3 cam. DSX flex fuel sensor. AEM methanol kit. Z06 brakes. Ebiach sway bars. ZR1 rep wheels and Nitto Invo tires. Monster stage 3 twin disc clutch. MGW short shifter. Corbeau race seats. Gforce race harnesses. SLP loudmouth 2 mufflers. Carbon fiber exhaust tips. RPM stage 4 transmission and Stage 3 rear diff. 3.73 gears. Vararam cai. Kooks 1 7/8 headers and x-pipe.
|
07-28-2016, 12:44 PM | #5 |
|
you shouldn't have any problems unbolt and remove
__________________
"How do u keep it under the speed limit? YOU CANT HAHAHAHA" |
07-28-2016, 01:29 PM | #6 |
Asskicker
Drives: '15 Camaro Blue Velvet Metallic 1le Join Date: Feb 2016
Location: Commerce, MI
Posts: 227
|
there is a white clip off center to the passenger side (if I remember correctly) that once you get all the nuts off, it will still be held on by that body clip. You'll have to pinch it, in order to get it out. Kind like a door panel clip. Not sure what their technical name is, but you should get the idea.
__________________
2015 Camaro 1ss 1le 1991 Camaro LsX-not stock |
07-28-2016, 01:48 PM | #7 |
Drives: 2014 2SS/RS LS3 Red Hot Join Date: May 2016
Location: AZ
Posts: 11
|
Awesome thanks guys, I might install it today or tomorrow and post a pic
Sent from my iPhone using Tapatalk |
07-28-2016, 02:54 PM | #8 |
Drives: 2014 Camaro 2SS 1LE /2011 2LT Join Date: Sep 2015
Location: Toronto Ontario
Posts: 422
|
|
07-28-2016, 04:03 PM | #9 |
H-Town Camaro Club
Drives: 2013 Dusk Edition 2SS/M6/Sun/NPP Join Date: May 2014
Location: Houston
Posts: 2,234
|
Just unbolt (6) and remove it, it pops right off. Though I advise you to do it in front of your service dealer you've already established a relationship with so they don't accuse you of the damage you are going to find. That is, if you want them to repaint your trunk lid.
|
|
|
|
|