Rapid Motorsports ZL1 Build- 784rwhp/757rwtq - Page 11 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Atomic Zl1 · 04-11-2016, 09:55 PM

Stock ported TB or 90mm?. Would be interested in how she does at the track as well.

Dutchman427 · 04-12-2016, 05:35 AM

^Stock ported unit. As stated before, I wanted to try and get the most power out of the factory parts. Car should do great, the driver.....probably not so much. Have not been to the track since 2009.

Dutchman427 · 09-04-2016, 11:51 AM

Finally got the car into the 10s Friday night on worn out M&H's.

60' 1.772
ET 10.97 @ 128

My two previous passes I hit 130mph at 11.2.

Atomic Zl1 · 09-04-2016, 12:44 PM

Still 784 rwhp or different setup?

2NASSTY · 09-04-2016, 01:12 PM

Congrats on the 10 sec slip in the 6M ZL1. Not too many people have done that. Great job Man!! I know you are happy.

Stefano · 09-04-2016, 11:37 PM

Congrats on breaking into the 10s with a manual! That's a bunch of power to get to the pavement.

Dutchman427 · 09-05-2016, 10:49 AM

Quote:

Originally Posted by Atomic Zl1

Still 784 rwhp or different setup?

Still the same set-up.

Dutchman427 · 09-05-2016, 10:52 AM

Quote:

Originally Posted by 2NASSTY

Congrats on the 10 sec slip in the 6M ZL1. Not too many people have done that. Great job Man!! I know you are happy.

Hey Chett, I appreciate the compliment! Yeah I am very happy and there is definitely more in the car. I will just keep getting that seat time. It is not easy to launch these machines. The goal was to get the car into the 10s this season, and I finally did that.

Dutchman427 · 09-05-2016, 10:53 AM

Quote:

Originally Posted by Stefano

Congrats on breaking into the 10s with a manual! That's a bunch of power to get to the pavement.

It is not easy man! I appreciate your compliment!

2NASSTY · 09-05-2016, 12:23 PM

Quote:

Originally Posted by Dutchman427

Hey Chett, I appreciate the compliment! Yeah I am very happy and there is definitely more in the car. I will just keep getting that seat time. It is not easy to launch these machines. The goal was to get the car into the 10s this season, and I finally did that.

No problem Andy. It will be easier now that you got that 10 sec Slip. You can work on the little things now that will make you dip lower in the 10s. Have fun with it. Congrats again!'

Dutchman427 · 09-06-2016, 05:34 AM

Quote:

Originally Posted by 2NASSTY

No problem Andy. It will be easier now that you got that 10 sec Slip. You can work on the little things now that will make you dip lower in the 10s. Have fun with it. Congrats again!'

Yes sir. Maple Grove just had its last "Fast Friday" this past week. I don't know if they are going to have any Test "N" Tunes. They used to run into the first week of November. I am running the Beast Coast Shootout. It is a roll racing event. Right now the car is down as I am waiting for the pair of M&Hs I ordered to arrive. Went to drive the car yesterday, and the right rear is flat and off the wheel.

mmr158 · 02-16-2018, 01:39 PM

are the welds still for sale ?

04-11-2016, 09:55 PM	#141
Atomic Zl1 Drives: 2013 ZL1-Clean one owner Join Date: Apr 2015 Location: Upstate NY Posts: 86	Stock ported TB or 90mm?. Would be interested in how she does at the track as well. __________________

09-04-2016, 12:44 PM	#144
Atomic Zl1 Drives: 2013 ZL1-Clean one owner Join Date: Apr 2015 Location: Upstate NY Posts: 86	Still 784 rwhp or different setup? __________________

09-04-2016, 01:12 PM	#145
2NASSTY Drives: 2014 M6 ZL1 Join Date: Jan 2012 Location: Tarpon Springs, Fl Posts: 774	Congrats on the 10 sec slip in the 6M ZL1. Not too many people have done that. Great job Man!! I know you are happy. __________________ 15' Ashen Gray Metallic Z/28 14' Crystal Red Tintcoat ZL1 6M, 9.62 at 150.75 MPH 12' Opulent Blue Metallic CTS-V Sedan, 10.690 at 129.60 MPH - SOLD 06' LeMans Blue Metallic Z06, 11.726 at 127.80 MPH Motor - SOLD. 96' Impala SS LTx, 11.397 at 118.10 MPH Motor, 1st stage 10.526 at 127.46 MPH

04-12-2016, 05:35 AM	#142
Dutchman427 Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009 Location: Reading, PA Posts: 1,040	^Stock ported unit. As stated before, I wanted to try and get the most power out of the factory parts. Car should do great, the driver.....probably not so much. Have not been to the track since 2009.

09-04-2016, 11:51 AM	#143
Dutchman427 Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009 Location: Reading, PA Posts: 1,040	Finally got the car into the 10s Friday night on worn out M&H's. 60' 1.772 ET 10.97 @ 128 My two previous passes I hit 130mph at 11.2.

09-04-2016, 11:37 PM	#146
Stefano Drives: 6th Gen NicKey Camaro & others. Join Date: Nov 2015 Location: Loves Park, Illinois Posts: 492	Congrats on breaking into the 10s with a manual! That's a bunch of power to get to the pavement.

02-16-2018, 01:39 PM	#152
mmr158 Drives: Camaro zl1 2014 Join Date: Jun 2014 Location: morgantown, WV Posts: 2	are the welds still for sale ?