What Did You Do To Your Camaro Today? - Page 1302 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

WeflyhereSS · 12-18-2016, 07:45 PM

Looking good bro !!! i knew that car look familar

CamaroFred · 12-18-2016, 09:26 PM

Quote:

Originally Posted by Woo

Attempted to plug my tire today and upon doing so I found that the nail didn't go straight in like it appeared. It went in and then angled off at like 100*'s inside the tire which sux. May have to get a new tire

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

get your new tire, It won't be only time.

Woo · 12-18-2016, 09:28 PM

Quote:

Originally Posted by CamaroFred

get your new tire, It won't be only time.

That's the thing, they are fairly new tires. 6 months old at the most...

Sent from my iPhone using Tapatalk

solizaaron18 · 12-18-2016, 09:50 PM

Quote:

Originally Posted by dantemcc

SIK AF!!! If those rockers were black, IMO, it would set it out to another stratosphere.

Thanks bro beans…. I have been going back and forth on just painting them satin black but I have been waiting to purchase the zl1 rockers and then the around car… pin stripe red.

Welker2 · 12-20-2016, 03:58 PM

Spent the morning giving it it's winter polish & wax

BLU DUCE · 12-20-2016, 07:28 PM

Went out to the garage took engine cover off. Going to buff the front of it out. Has some slight straight line marks in it.

Spec · 12-20-2016, 07:32 PM

Got mine back from the shop today. Had to take it back after my front side marker would not turn off after I shut the car off. I thought the ground issue repair I had a few weeks back fixed my electrical problems but this was not the case. I went in Saturday and they told me it was a bad BCM (Body Control Module). The repair went well and problem solved so far.

Ryanbabz71 · 12-20-2016, 08:43 PM

Started some winter mods

Sent from my iPad using Tapatalk

rjinotti · 12-20-2016, 09:34 PM

Installed a Sparks Restoration SS grille emblem. Went with white to add a little color and keep with the 1SS theme. Ordered rear Sparks emblem to match for deck lid will be here Thursday can't wait.

KICKER · 12-20-2016, 11:23 PM

Quote:

Originally Posted by rjinotti

Installed a Sparks Restoration SS grille emblem. Went with white to add a little color and keep with the 1SS theme. Ordered rear Sparks emblem to match for deck lid will be here Thursday can't wait.

Your "SS" looks great!

Post a pic of your rear one when you get it!

rjinotti · 12-20-2016, 11:36 PM

Quote:

Originally Posted by KICKER

Your "SS" looks great!

Post a pic of your rear one when you get it!

Thank you!! Sure will, really nice emblems made well really digging it and the look too.

chuckie669 · 12-21-2016, 06:09 PM

Bought some redline 75-90 gear oil and a little pump. Will change the differential oil this weekend.

witenite · 12-21-2016, 09:23 PM

Washed it. Finally a day with temps above 40 and no rain!

cawj87 · 12-21-2016, 11:56 PM

Replaced the driver's side lock cylinder with a plug from a passenger side door handle to prevent getting locks popped again. Jerkoffs left a wave in the door too... Note to attemptees of this, it can all be done from one torx screw in the door jamb part of the door. No need to pull the door panel. Could be a 5 minute job but I wasted an hour messing with the panel and all the wiring plugs.

12-18-2016, 07:45 PM	#18215
WeflyhereSS Drives: 2012 Black on Black Camaro 2ss Join Date: Dec 2015 Location: CT Posts: 883 View My Garage	Looking good bro !!! i knew that car look familar __________________ "How do u keep it under the speed limit? YOU CANT HAHAHAHA"

12-20-2016, 03:58 PM	#18219
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	Spent the morning giving it it's winter polish & wax Attached Images __________________

12-20-2016, 07:28 PM	#18220
BLU DUCE Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011 Location: Chittenango, NY, USA Posts: 7,219 View My Garage	Went out to the garage took engine cover off. Going to buff the front of it out. Has some slight straight line marks in it. __________________

12-20-2016, 08:43 PM	#18222
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,359 View My Garage	Started some winter mods Sent from my iPad using Tapatalk __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

12-20-2016, 09:34 PM	#18223
rjinotti Drives: 2011 SGM 1SS A6 & 2014 SW 2SS/RS M6 Join Date: Jul 2014 Location: Lighthouse Point, Fl Posts: 490 View My Garage	Installed a Sparks Restoration SS grille emblem. Went with white to add a little color and keep with the 1SS theme. Ordered rear Sparks emblem to match for deck lid will be here Thursday can't wait. Attached Images __________________

12-20-2016, 07:32 PM	#18221
Spec Account Suspended Drives: 2010 Camaro 1SS LS3 Join Date: Jan 2015 Location: Riverside, CA Posts: 4,018	Got mine back from the shop today. Had to take it back after my front side marker would not turn off after I shut the car off. I thought the ground issue repair I had a few weeks back fixed my electrical problems but this was not the case. I went in Saturday and they told me it was a bad BCM (Body Control Module). The repair went well and problem solved so far.

12-21-2016, 06:09 PM	#18226
chuckie669 Drives: 2011 ss Join Date: Sep 2015 Location: E-TX Posts: 764	Bought some redline 75-90 gear oil and a little pump. Will change the differential oil this weekend.

12-21-2016, 09:23 PM	#18227
witenite Drives: 2010 2SS non RS Join Date: May 2014 Location: Virginia Posts: 3,377 View My Garage	Washed it. Finally a day with temps above 40 and no rain!

12-21-2016, 11:56 PM	#18228
cawj87 Drives: 2013 CRT 2SS 6M 1LE Join Date: Sep 2016 Location: Milwuakee, WI Posts: 19	Replaced the driver's side lock cylinder with a plug from a passenger side door handle to prevent getting locks popped again. Jerkoffs left a wave in the door too... Note to attemptees of this, it can all be done from one torx screw in the door jamb part of the door. No need to pull the door panel. Could be a 5 minute job but I wasted an hour messing with the panel and all the wiring plugs. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM