11-28-2016, 01:58 PM | #1 |
Drives: C6 Corvette Join Date: Sep 2013
Location: Tampa, FL
Posts: 1,264
|
Sold car. Parting out.
I just got done taking parts off the car and will get pics asap. I have for sale..
BBK 1 3/4" LT headers and O2 extenders w/o cats - $350 BC br coilovers (installed in April this year) - $700 LNC 2000 2-step / timing retard- SOLD Hurst short throw shifter with white ball - SOLD Vertini Magic concave rims w/ tires 80% tread left - $1900 I've never shipped rims so we'll need to figure out the best way for that if so. Z/28 spoiler to fit 10-13 trunk - SOLD Stock driveshaft - any offer will be accepted if buyer pays shipping LS3 cam with gear - $150 shipped (I may or may not have the stock springs to throw in as well..have to check) Feel free to post on the thread but PM will get quicker response since it goes to my email.
__________________
2008 C6 m6. Carbon creations front/rear carbon fiber wodebody fenders. Carbon fiber hood carbon fiber roof hoop carbon fiber zr1 extreme spoiler. NW 102mm tb. Ported intake manifold. Cometic .040 head gaskets. LG motorsports G6x3 cam. DSX flex fuel sensor. AEM methanol kit. Z06 brakes. Ebiach sway bars. ZR1 rep wheels and Nitto Invo tires. Monster stage 3 twin disc clutch. MGW short shifter. Corbeau race seats. Gforce race harnesses. SLP loudmouth 2 mufflers. Carbon fiber exhaust tips. RPM stage 4 transmission and Stage 3 rear diff. 3.73 gears. Vararam cai. Kooks 1 7/8 headers and x-pipe.
Last edited by ytown87; 03-03-2017 at 09:36 AM. |
11-29-2016, 06:18 AM | #2 |
MattyMatt
|
Pic of the z28 spoiler?
|
11-29-2016, 06:34 AM | #3 |
Drives: 2015 Summit White 2SS Join Date: Oct 2016
Location: Flat Rock, NC
Posts: 88
|
Pic of the shifter when you get a chance.
|
11-29-2016, 09:05 AM | #4 |
Drives: 2010 camaro ss Join Date: Jun 2010
Location: Port Arthur, Tx
Posts: 2,383
|
Damn sucks to hear you sold it. Also interested in the spoiler
|
11-30-2016, 10:35 AM | #5 |
Drives: C6 Corvette Join Date: Sep 2013
Location: Tampa, FL
Posts: 1,264
|
sorry been inactive since posting. was also battling the flu while trying to get the car completely demoded to trade. it absolutely sucked. I ended up leaving a ported intake manifold and throttle body on the car as well as my McLeod twin disc clutch and borla s-type cat back bc I didn't have it in me to take off. the HURST is gone. went almost immediately after submitting the thread.
heres a pic of the headers and spoiler when it was on the car. I will gather up the suspension tonight and get the spoiler out of the attic for better pics as well.
__________________
2008 C6 m6. Carbon creations front/rear carbon fiber wodebody fenders. Carbon fiber hood carbon fiber roof hoop carbon fiber zr1 extreme spoiler. NW 102mm tb. Ported intake manifold. Cometic .040 head gaskets. LG motorsports G6x3 cam. DSX flex fuel sensor. AEM methanol kit. Z06 brakes. Ebiach sway bars. ZR1 rep wheels and Nitto Invo tires. Monster stage 3 twin disc clutch. MGW short shifter. Corbeau race seats. Gforce race harnesses. SLP loudmouth 2 mufflers. Carbon fiber exhaust tips. RPM stage 4 transmission and Stage 3 rear diff. 3.73 gears. Vararam cai. Kooks 1 7/8 headers and x-pipe.
|
11-30-2016, 12:26 PM | #6 |
Let's go Rangers!
|
Does the spoiler fit the factory holes?
|
11-30-2016, 12:28 PM | #7 |
Drives: C6 Corvette Join Date: Sep 2013
Location: Tampa, FL
Posts: 1,264
|
Yes..slightly off but I didn't have to do any drilling or modifying. Angles the screw and it grabbed and pulled the spoiler tight.
I'll be in Orlando this weekend for Festival of Speed if you're seriously interested and would want to meet to get it.
__________________
2008 C6 m6. Carbon creations front/rear carbon fiber wodebody fenders. Carbon fiber hood carbon fiber roof hoop carbon fiber zr1 extreme spoiler. NW 102mm tb. Ported intake manifold. Cometic .040 head gaskets. LG motorsports G6x3 cam. DSX flex fuel sensor. AEM methanol kit. Z06 brakes. Ebiach sway bars. ZR1 rep wheels and Nitto Invo tires. Monster stage 3 twin disc clutch. MGW short shifter. Corbeau race seats. Gforce race harnesses. SLP loudmouth 2 mufflers. Carbon fiber exhaust tips. RPM stage 4 transmission and Stage 3 rear diff. 3.73 gears. Vararam cai. Kooks 1 7/8 headers and x-pipe.
|
11-30-2016, 11:22 PM | #8 |
|
Interested in spoiler and 2 step. Need anything else for 2 step install?
Sent from my iPhone using Tapatalk
__________________
Cold Air Inductions CAI Stainless Power LT's with HFC's Flowmaster American Thunder Cat Back APEX Scoop and WW Relocation Kit VMAX Ported Throttle Body Custom Dyno Tune Pfadt 1.25" Lowering Springs ZL1 Rims on 275 front 315 Rear custome underlay vinyl wrap Anvil Spoiler heritage grill APR Front Splitter Custom Emblempros emblems ZL1 Side Skirts 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)
|
12-01-2016, 09:39 AM | #9 |
Drives: C6 Corvette Join Date: Sep 2013
Location: Tampa, FL
Posts: 1,264
|
If you are 6mt youll need the pedal micro switch to put behind the clutch pedal. That's all. It is a very simple install.
__________________
2008 C6 m6. Carbon creations front/rear carbon fiber wodebody fenders. Carbon fiber hood carbon fiber roof hoop carbon fiber zr1 extreme spoiler. NW 102mm tb. Ported intake manifold. Cometic .040 head gaskets. LG motorsports G6x3 cam. DSX flex fuel sensor. AEM methanol kit. Z06 brakes. Ebiach sway bars. ZR1 rep wheels and Nitto Invo tires. Monster stage 3 twin disc clutch. MGW short shifter. Corbeau race seats. Gforce race harnesses. SLP loudmouth 2 mufflers. Carbon fiber exhaust tips. RPM stage 4 transmission and Stage 3 rear diff. 3.73 gears. Vararam cai. Kooks 1 7/8 headers and x-pipe.
|
12-07-2016, 12:16 PM | #10 |
Drives: C6 Corvette Join Date: Sep 2013
Location: Tampa, FL
Posts: 1,264
|
bump
__________________
2008 C6 m6. Carbon creations front/rear carbon fiber wodebody fenders. Carbon fiber hood carbon fiber roof hoop carbon fiber zr1 extreme spoiler. NW 102mm tb. Ported intake manifold. Cometic .040 head gaskets. LG motorsports G6x3 cam. DSX flex fuel sensor. AEM methanol kit. Z06 brakes. Ebiach sway bars. ZR1 rep wheels and Nitto Invo tires. Monster stage 3 twin disc clutch. MGW short shifter. Corbeau race seats. Gforce race harnesses. SLP loudmouth 2 mufflers. Carbon fiber exhaust tips. RPM stage 4 transmission and Stage 3 rear diff. 3.73 gears. Vararam cai. Kooks 1 7/8 headers and x-pipe.
|
12-08-2016, 08:41 AM | #11 |
Drives: C6 Corvette Join Date: Sep 2013
Location: Tampa, FL
Posts: 1,264
|
the LNC 2000
__________________
2008 C6 m6. Carbon creations front/rear carbon fiber wodebody fenders. Carbon fiber hood carbon fiber roof hoop carbon fiber zr1 extreme spoiler. NW 102mm tb. Ported intake manifold. Cometic .040 head gaskets. LG motorsports G6x3 cam. DSX flex fuel sensor. AEM methanol kit. Z06 brakes. Ebiach sway bars. ZR1 rep wheels and Nitto Invo tires. Monster stage 3 twin disc clutch. MGW short shifter. Corbeau race seats. Gforce race harnesses. SLP loudmouth 2 mufflers. Carbon fiber exhaust tips. RPM stage 4 transmission and Stage 3 rear diff. 3.73 gears. Vararam cai. Kooks 1 7/8 headers and x-pipe.
|
03-03-2017, 09:31 AM | #12 |
Drives: C6 Corvette Join Date: Sep 2013
Location: Tampa, FL
Posts: 1,264
|
bump
__________________
2008 C6 m6. Carbon creations front/rear carbon fiber wodebody fenders. Carbon fiber hood carbon fiber roof hoop carbon fiber zr1 extreme spoiler. NW 102mm tb. Ported intake manifold. Cometic .040 head gaskets. LG motorsports G6x3 cam. DSX flex fuel sensor. AEM methanol kit. Z06 brakes. Ebiach sway bars. ZR1 rep wheels and Nitto Invo tires. Monster stage 3 twin disc clutch. MGW short shifter. Corbeau race seats. Gforce race harnesses. SLP loudmouth 2 mufflers. Carbon fiber exhaust tips. RPM stage 4 transmission and Stage 3 rear diff. 3.73 gears. Vararam cai. Kooks 1 7/8 headers and x-pipe.
|
|
|
|
|