You are browsing camaro5 
 |
|
01-09-2017, 02:39 PM
|
#1 |
 Drives: 2014 Camaro 2SS Join Date: Nov 2016
Location: Georgia
Posts: 141
|
C quartz Pic-Results
Just wanted to share a quick shot of my hood. This is after paint correction (by me the NOVICE) and Car Pro Essence, Then two coats of C Quartz. No reload on yet in this photo.
__________________
2014 Black/Black Camaro 2SS RS L99, CAI Intake, Speed Engineering LTH. Jannetty Tuned.
|
|
|
|
01-09-2017, 03:48 PM
|
#2 |
  
Drives: Supercharged 2013 AGM 2SS/RS Join Date: Oct 2013
Location: Los Angeles, CA
Posts: 786
|
Nice! Post some pics of the whole car when ready!
__________________
2013 AGM 2SS/RS
SLP TVS2300, Edge CAI, 3" Magnaflow catback, BC Racing BR series coilovers, HRE FF15's (20x10 square) with Michelin Pilot Sport 4S's, GM STB, BMR front and rear sway bars and toe links, Prothane subframe bushings and front control arm inserts, JDP rear upper control arm bushings, Elite Engineering catch can. Tuned by Cunningham Motorsports. 1967 Bolero Red 396 SS/RS Convertible |
|
|
|
|
01-09-2017, 04:15 PM
|
#3 |
      
|
Nice work.
 Your going to like how easy your car will be to clean now. 
__________________
 Roto-Fab intake, SW 1 7/8" LT w/hi flow cats, Flowmaster outlaw exhaust, UDP, 160* stat, Circle D 3200, Moroso catch can, TCI line lock, Zex Nitrous 125 shot, 3.91 gear, Eaton True-trac, DSS 1000hp axles. |
|
|
|
|
01-09-2017, 04:40 PM
|
#4 |
 
Drives: 2013 Camaro ZL1 Join Date: Sep 2013
Location: Grand Rapids, MI
Posts: 228
|
Wow, looks awesome.
Post up some pics of the whole thing. Also, how easy is C Quartz to use? I want to get mine done in the Spring.
__________________
2013 Yellow Camaro ZL1
Purchased: (9/24/16) 5% Tint All Around 45% Tint on Windshield Roto-Fab Cold Air Intake Oracle Afterburner Tail Lights Oracle LED Sidemarkers RDP Tune TSP Long Tube Headers Forza Componenti 3-Way Exhaust Controller ZL1 Addons Wicker Bill |
|
|
|
|
01-09-2017, 06:39 PM
|
#5 | |
|
Drives: 2014 Camaro 2SS Join Date: Nov 2016
Location: Georgia
Posts: 141
|
Quote:
I have a portion of high spots in the coating, I was right in the middle of applying it when a family member got sent to ICU. So I had to wipe and go, I did my best but now I have a couple spots. Anyways like building a house or anything the foundation makes the difference get the paint clean and corrected to your desire before applying. Worst part is waiting for it to cure  cause my patience to see the results is short. 
__________________
2014 Black/Black Camaro 2SS RS L99, CAI Intake, Speed Engineering LTH. Jannetty Tuned.
|
|
|
|
|
|
01-10-2017, 11:07 AM
|
#6 |
Drives: 2013 ZL1 M6 Join Date: Oct 2013
Location: Nor Cal
Posts: 1,825
|
Hit the high spots with essence and it will take them away.
Essence Plus is great to take care of small blemishes as well, but has no abrasives. Car Pro designed this as a coating repair. It works very well to repair and extend the coating life. Ech20 used as a waterless, rinseless, or detail spray over coating is just fantastic. Car pro designed it especially for coatings. I think it is the best product release ever for coated cars. Also works amazingly over PPF. A couple of quick shots Car Pro Ech20 rinseless wash, following with detail spray dilution ratio. Here are some user reviews on Ech20 http://www.autogeekonline.net/forum/...w-wow-wow.html And Essence plus info as well http://www.autogeekonline.net/forum/...ence-plus.html |
|
|
|
|
01-10-2017, 02:06 PM
|
#7 | |
 
Drives: Very Shiny Join Date: Nov 2015
Location: Boynton Beach, Fl
Posts: 48
|
Quote:
Side Notes: I'd wait a week after applying CQ to wash and apply Reload. I would use Reset to wash. Reset is made to work with CQuartz. Use caution when you first use Reload to see how it & your paint play together. Use quality plush microfiber towels and flip the towels often to avoid any streaks. Reload is greatly improved from a year or two ago. It used to streak on black paint. It should be fine now but I would do a test spot first. Reload can be diluted with water. |
|
|
|
|
|
01-11-2017, 09:24 PM
|
#8 |
|
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
got some optimum Gloss Coat waiting come spring, bought it about a year ago but had some back issues most of spring last year and could not get to it til well in to the summer so just decided I would hold off til this spring to do it right. got a couple spots to wet sand and level off, then buff, polish. feeling much better and looking forward to getting it done
PS by the way, that black looks awesome, super deep reflection, get mine anywhere near that reflective I will be a happy camper looks spectacular!
__________________
 Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint |
|
|
|
|
|
|
|
 |
|
|
