What Did You Do To Your Camaro Today? - Page 1327 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Woo · 01-21-2017, 09:17 PM

Debating on whether to continue this in the yellowing out process or black out the rest of the face and "bots" or leave it so it pops.... life or death decision aaaaaaaaah smh

Sent from my iPhone using Tapatalk

Woo · 01-21-2017, 09:32 PM

All the interior parts I did are now dry and completely reinstalled. Added some more graphics to the car. I'm still not done with what I will be doing for the doors and hood. Took off all the stickers from parts I have installed on the vehicle (no need to broadcast them if I'm not racing haha) I like what I have so far......

Sent from my iPhone using Tapatalk

Jazzzed · 01-21-2017, 10:49 PM

Quote:

Originally Posted by CamaroFred

Yeah, $135.

Now it doesn't bother me so much about the money, but you know and I know, we all know, the the car doesn't lie to Onstar.

And when I drive it the ringingdingys don't light up the DIC, I'm good to go.

Yes, but if you disconnect the battery, the ECU resets and all of the OBD2 parameters go into the Not Ready state. To get them back into the Ready state, you have to drive around for about a week. Some of those parameters can take 20 engine starts to get into the Ready state. This is so that people cant just reset their computer and go for a test. Your OnStar is happy because there are no issues to report. And yes, the car is fine. But it is not in a testing condition at the moment.

SharpOldNo7 · 01-22-2017, 01:03 AM

I used the 303 Fabric Guard to condition the ragtop today. I like Gold Eagle 303 products as that's what I've used on my boat for years and it protects my boat in a more harsh environment than the camaro is in. I chose to roll it in rather than to spray it on. I think rolling it gives a better coverage as well as more protectant is actually delivered to the ragtop as opposed to spraying it on. It dried clear and smooth with no streaking.

CamaroFred · 01-22-2017, 01:21 AM

Quote:

Originally Posted by Jazzzed

Yes, but if you disconnect the battery, the ECU resets and all of the OBD2 parameters go into the Not Ready state. To get them back into the Ready state, you have to drive around for about a week. Some of those parameters can take 20 engine starts to get into the Ready state. This is so that people cant just reset their computer and go for a test. Your OnStar is happy because there are no issues to report. And yes, the car is fine. But it is not in a testing condition at the moment.

Damn, sounds like my ex.

18LTLoveIt · 01-22-2017, 02:06 AM

Thinking about taking it out tomorrow for it's monthly spin.

Ryanbabz71 · 01-22-2017, 03:40 PM

Quote:

Originally Posted by BlazeNGlory

Installed T-Rex Lower Billet Grill to better match the Heritage grill.....thanks for the grill RatRacer....

Wow looks good. How does it install?

Sent from my iPad using Tapatalk

Gonzo SS · 01-22-2017, 04:27 PM

Put on the side marker decals my wife got me for Christmas.

Silent... · 01-22-2017, 05:09 PM

Checked to see how much tire tread is left after doing a recent HPDE event. We're good for now!

Woo · 01-22-2017, 05:29 PM

Quote:

Originally Posted by Gonzo SS

Put on the side marker decals my wife got me for Christmas.

Nice bro, that adds a sweet touch! where'd she find those?

Sent from my iPhone using Tapatalk

Woo · 01-22-2017, 05:58 PM

Added gauges, haven't completely installed them yet, waiting on my supercharger I'll be getting sometime soon... I found some glowshift gauges that I like and will install those once I get to that point. Bought the cheaper Stewart warner gauges for the time being.....

Sent from my iPhone using Tapatalk

Gunmetal Speedster · 01-22-2017, 06:51 PM

Installed my JRE scoop, Roto-Fab w/w relocation kit, and ZL1 grille

PandaSS · 01-22-2017, 07:56 PM

Today I installed the Phasetek rear blackout kit and a front/rear black vinyl bowtie. I think it really highlights the chrome on the edge of the bowties. The front bowtie was tough because of how it curves and I didn't get it car show perfect. The rear was fairly easy. Took a little over an hour to do the whole thing right

G701LE · 01-22-2017, 08:48 PM

Nice. Looks a lot better. I finally got my American/checkered flag, V8 emblem. Just have to put them on.

01-21-2017, 09:17 PM	#18565
Woo O’Dark30 Drives: 2016 SS Black Panther Join Date: May 2016 Location: Atlanta Posts: 443 View My Garage	What Did You Do To Your Camaro Today? Debating on whether to continue this in the yellowing out process or black out the rest of the face and "bots" or leave it so it pops.... life or death decision aaaaaaaaah smh Sent from my iPhone using Tapatalk __________________ The Earth is what "God" created, the World is the state of living "man" causes us to be in. -Woo

01-21-2017, 09:32 PM	#18566
Woo O’Dark30 Drives: 2016 SS Black Panther Join Date: May 2016 Location: Atlanta Posts: 443 View My Garage	All the interior parts I did are now dry and completely reinstalled. Added some more graphics to the car. I'm still not done with what I will be doing for the doors and hood. Took off all the stickers from parts I have installed on the vehicle (no need to broadcast them if I'm not racing haha) I like what I have so far...... Sent from my iPhone using Tapatalk __________________ The Earth is what "God" created, the World is the state of living "man" causes us to be in. -Woo

01-22-2017, 01:03 AM	#18568
SharpOldNo7 Drives: 2015 2LT RS Convertible Join Date: Dec 2016 Location: Mississippi Posts: 298	Conditioned the Ragtop with 303 I used the 303 Fabric Guard to condition the ragtop today. I like Gold Eagle 303 products as that's what I've used on my boat for years and it protects my boat in a more harsh environment than the camaro is in. I chose to roll it in rather than to spray it on. I think rolling it gives a better coverage as well as more protectant is actually delivered to the ragtop as opposed to spraying it on. It dried clear and smooth with no streaking. Attached Images

01-22-2017, 04:27 PM	#18572
Gonzo SS Drives: 2012 IBM 2SS/RS LS3/M6 Join Date: Apr 2015 Location: Atlanta, GA Posts: 354	Put on the side marker decals my wife got me for Christmas. __________________ Stainless Power LT Headers, K&N Typhoon CAI, VMAX Ported Throttle Body, Jannetty Tune, Phastek Scoop & Washer Bottle Relocator, VTC Resonator Delete w/Flowmaster Super 10's, BMR Lowering Springs, Koni Orange Struts, Factory Hurst Short Throw Shifter, Skip Shift Eliminator, DRL & Halo Harness, Window Valet Scosche Kit w/Pioneer AVH-4100NEX, Lloyds Custom Mats, Blue LED Footwell Lighting

01-22-2017, 05:09 PM	#18573
Silent... Drives: 2012 2LT RS White Born: 11/10/11 Join Date: Nov 2011 Location: Florida Posts: 313	Checked to see how much tire tread is left after doing a recent HPDE event. We're good for now! __________________ Grey Hockey Stripes; Heritage Grill; GM GFX - Unpainted Argent Gray; GM Dovetail Spoiler; Rivercity Creations custom painted rear bowtie, RS & Taillight Bezels; MRR M017 Graphite Wheels; Nitto NT555 G2; ACS 4Teen Heat Extractor RX Catch Can;CAI; MF Exhaust; VMAX CNC Spiral Ported TB; Overkill Stage 1 Supercharger System; Hotchkis Comp Sway Bar Set w/ End Links, Cadillac CTSV 4 Piston Brembos on all corners with SS Black Hat Rotors Youtube Channel - HPDE Driving Videos https://www.youtube.com/channel/UCpO...8aw6hgX3O1Uh7A

01-22-2017, 02:06 AM	#18570
18LTLoveIt Drives: 2018 Hyper Blue LT RS Join Date: Dec 2016 Location: Phoenix AZ Posts: 1,474 View My Garage	Thinking about taking it out tomorrow for it's monthly spin.

01-22-2017, 05:58 PM	#18575
Woo O’Dark30 Drives: 2016 SS Black Panther Join Date: May 2016 Location: Atlanta Posts: 443 View My Garage	What Did You Do To Your Camaro Today? Added gauges, haven't completely installed them yet, waiting on my supercharger I'll be getting sometime soon... I found some glowshift gauges that I like and will install those once I get to that point. Bought the cheaper Stewart warner gauges for the time being..... Sent from my iPhone using Tapatalk __________________ The Earth is what "God" created, the World is the state of living "man" causes us to be in. -Woo Last edited by Woo; 01-22-2017 at 06:19 PM.

01-22-2017, 06:51 PM	#18576
Gunmetal Speedster Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016 Location: Middletown, Ohio Posts: 2,914 View My Garage	Installed my JRE scoop, Roto-Fab w/w relocation kit, and ZL1 grille __________________ **SOLD504HP/433**TQ \| Night Fury cammed • Cold Air Inductions intake • Bo White ported TB • Speed Engineering 1 7/8 longtubes • NPP catback • QTP low profile cutouts • Powerbond 25% UDP • 3.73 gears • JRE scoop • ZL1 grille • R1 Concepts drilled/slotted rotors • built/tuned by Weapon X Motorsports Instagram \| YouTube \| Build Thread

01-22-2017, 07:56 PM	#18577
PandaSS Drives: 2010 1SS L99 Join Date: Nov 2016 Location: Annapolis, MD Posts: 83 View My Garage	Rear blackout kit Today I installed the Phasetek rear blackout kit and a front/rear black vinyl bowtie. I think it really highlights the chrome on the edge of the bowties. The front bowtie was tough because of how it curves and I didn't get it car show perfect. The rear was fairly easy. Took a little over an hour to do the whole thing right Attached Images

01-22-2017, 08:48 PM	#18578
G701LE Drives: 2010 2SS/RS L99 IBM silver stipes Join Date: Dec 2015 Location: K.C. Kansas Posts: 1,329 View My Garage	Nice. Looks a lot better. I finally got my American/checkered flag, V8 emblem. Just have to put them on. __________________ 2010 Imperial Blue w/ Silver stripes 2SS/RS L99 Mods = Not enough....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM