You are browsing camaro5 
 |
|
02-20-2017, 11:26 PM
|
#1 |
 
|
1LE kit missing springs?
Ok so I ordered the 1LE kit for my 2010 SS from Ed Rinke Chevy, long story short I just broke open the boxes and to my surprise, there are no springs, or stops. Is the kit supposed to come with those like it shows in the pictures or was I mislead by the photos?
|
|
|
|
02-21-2017, 12:50 AM
|
#2 |
|
USA-1
|
If I remember from my studies on this forum, the SS and 1LE springs are the same.
__________________
"A Camaro in the garage is safe, but that's not what Camaros are built for..."
R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete |
|
|
|
|
02-21-2017, 06:38 AM
|
#3 |
       
|
Springs do not come with the kit.
__________________
 |
|
|
|
|
02-21-2017, 07:03 AM
|
#4 |
|
Tri-County Camaro SWFL
|
1LE springs are SS springs. But you are right 1LE kit does show springs.
__________________
|
|
|
|
|
02-22-2017, 11:32 AM
|
#5 |
|
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,171
|
Use your SS springs as they are the same as the 1LE springs.
|
|
|
|
|
02-23-2017, 08:17 AM
|
#6 |
|
|
I was told that the picture showing the kit with springs is actually the V6 kit. My kit did not come with springs and I swapped the stock springs with 1" Hotchkis drop springs at the time of install.
__________________
|
|
|
|
|
|
|
|
 |
|
|
