Adding Nitrous to my cammed Camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Danthaman · 03-03-2017, 11:36 PM

I have a 2011 Camaro that I just got the BTR stage 4 cam installed. I'm wanting to know if anyone has run Nitrous with this cam? It's M6 with LT and CAi. Yes I know I need to upgrade my clutch and suspension. Going with a McLeod clutch and BMR suspension. Plan on 17" DR also. Mainly just wanting to know how much hp/tq you put down to the wheels.

booneSS13 · 03-06-2017, 01:23 AM

Check these videos out. I had the same question and this answered it for me. I posted part 1 and part 2

https://youtu.be/5AlDdxdhHxU
https://youtu.be/q8WOWd004AE

Sent from my VS990 using Tapatalk

Danthaman · 03-09-2017, 02:08 AM

Those videos don't help what I'm asking. I'm wanting to know how much Nitrous do you run with BTR 4 cam? Looking for videos of Dyno or 1/4 mile runs.

blake-b · 03-09-2017, 04:15 AM

The engine and the tune will dictate how much nitrous you can safely run, not the cam when dealing with a mostly stock LS engine.
Read some of these:
https://www.google.com/search?q=how+....camaro5.com&*

jman123 · 03-09-2017, 07:07 AM

Would do a dedicated fuel cell before suspension if I was you. I made 617/655 on a 150 shot. Full e85 with dedicated fuel. Also ran on my stock 20's with MT ET street drag radials and hooked perfectly. Also ran stock clutch all the way up to the point where I went agp. My best at the track with a 2.1 60' lol was an 11.68 @ 128 on a 100 shot and 93.

Danthaman · 03-10-2017, 03:16 AM

Appreciate the input guys. Going to talk with my tuner about it some more. He said I could run 150 shot no problem.

03-03-2017, 11:36 PM	#1
Danthaman Drives: 2011 SS/RS Join Date: Aug 2013 Location: East Texas Posts: 83 View My Garage	Adding Nitrous to my cammed Camaro I have a 2011 Camaro that I just got the BTR stage 4 cam installed. I'm wanting to know if anyone has run Nitrous with this cam? It's M6 with LT and CAi. Yes I know I need to upgrade my clutch and suspension. Going with a McLeod clutch and BMR suspension. Plan on 17" DR also. Mainly just wanting to know how much hp/tq you put down to the wheels.

03-06-2017, 01:23 AM	#2
booneSS13 Drives: 2013 Camaro SS LS3 Join Date: Jun 2015 Location: Davenport IA Posts: 718	Check these videos out. I had the same question and this answered it for me. I posted part 1 and part 2 https://youtu.be/5AlDdxdhHxU https://youtu.be/q8WOWd004AE Sent from my VS990 using Tapatalk __________________ *Romans 5:8* But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. -Fastlane Cold Air Intake, NPP cat back exhaust, Stainless Works LT Headers, 2r max camshaft, Stage 3 Ported Heads (Manley Stainless steel values, titanium retainers, dual valve springs, bronze guides), Wiseco Forged Pistons, K1 Forged Rods, Clevite Bearings, Factory Crankshaft, Comp Cams rocker arm trunion kit, Morel 5315 lifters, JP performance single billet timing chain, Melling oil pump, Spec stage 3+ clutch and flywheel, BMR trailing arms, Nitto 555r 305/35/20.

03-09-2017, 07:07 AM	#5
jman123 Drives: 2015 Camaro 2SS 1LE Join Date: Feb 2015 Location: Florida Posts: 139	Would do a dedicated fuel cell before suspension if I was you. I made 617/655 on a 150 shot. Full e85 with dedicated fuel. Also ran on my stock 20's with MT ET street drag radials and hooked perfectly. Also ran stock clutch all the way up to the point where I went agp. My best at the track with a 2.1 60' lol was an 11.68 @ 128 on a 100 shot and 93. __________________ AGP Twin turbo kit, base 54/57 Borg Warner turbos, TSP stage 4 N/A cam, AGP twin 430lph e85 pump fuel system w/ flex fuel sensor, 1000cc FIC injectors, Grimm speed manual boost controller. (830 rwhp 778 rwtq @ 15.5 psi)

03-09-2017, 02:08 AM	#3
Danthaman Drives: 2011 SS/RS Join Date: Aug 2013 Location: East Texas Posts: 83 View My Garage	Those videos don't help what I'm asking. I'm wanting to know how much Nitrous do you run with BTR 4 cam? Looking for videos of Dyno or 1/4 mile runs.

03-09-2017, 04:15 AM	#4
blake-b Drives: 2009 ZR1 Join Date: May 2010 Location: KCMO Posts: 3,205	The engine and the tune will dictate how much nitrous you can safely run, not the cam when dealing with a mostly stock LS engine. Read some of these: https://www.google.com/search?q=how+....camaro5.com&*

03-10-2017, 03:16 AM	#6
Danthaman Drives: 2011 SS/RS Join Date: Aug 2013 Location: East Texas Posts: 83 View My Garage	Appreciate the input guys. Going to talk with my tuner about it some more. He said I could run 150 shot no problem.