02-10-2016, 02:39 PM | #15 |
Crewel Jewel
Drives: RJT-2SS-RS-6M Join Date: Nov 2009
Location: Nanaimo, BC
Posts: 426
|
Anyone offering this as a kit?
__________________
Whippled |
02-10-2016, 02:51 PM | #16 |
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
|
03-29-2017, 04:35 PM | #17 |
|
Having trouble finding the "TCBA2117M Bearing" part anywhere. Anyone have any leads?
|
01-25-2019, 05:22 PM | #18 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,089
|
Called RSGear new kit is about 135'ish.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
01-25-2019, 06:45 PM | #19 |
Drives: 2010 ss Join Date: Oct 2015
Location: windom mn
Posts: 337
|
I just bought the kit last week from them 152 bucks shipped also came with the seal
|
01-25-2019, 11:25 PM | #20 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,743
|
My 13 1LE came with the tail shaft bearing already installed. No idea if only the MM6 trans or if it started in 2013 for all manuals
__________________
|
01-26-2019, 01:53 PM | #21 | |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
Quote:
Sent from my P00I using Tapatalk
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
|
01-26-2019, 09:58 PM | #22 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,089
|
Gonna do mine during clutch replacement.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
01-27-2019, 10:54 PM | #23 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,743
|
Mine is an April car, so a middle to late ‘13
__________________
|
01-28-2019, 04:19 AM | #24 |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
Easiest way to check, or does it have to be disassembled?
Mine was early I think made in January or February I had to wait for it to warm up to take delivery because of the tires. Sent from my SM-G935V using Tapatalk
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
01-28-2019, 06:04 PM | #25 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,743
|
You have to pull the tail housing
Give Tick Performance a call, Jeremy should be able to help you out
__________________
|
09-05-2020, 07:32 PM | #26 |
Drives: 2014 1le 1SS CRMT Join Date: Apr 2014
Location: Boston mass
Posts: 1,185
|
|
09-05-2020, 09:15 PM | #27 |
SomeguyK
Drives: 2010 Black 2SS/RS Join Date: Nov 2014
Location: FL
Posts: 1,947
|
You have to call them.
__________________
TMS 427, Dart iron Block, Forged assembly, Frankenstien heads, AGP TT 62/62 BB turbo's, AGP/Fore triple fuel system, Tilton clutch, Holley 1 7/8 shorties, Technostalgia tail lights,Oracle, Aeroforce, MGW shifter,Flowmaster, Pegasus subframe bushings,BMR trailing & toe arms,Z28 UCA bushings,Zl1 rear sway bar,Prothane,BMR,Goodridge brake lines,Ridetech HQ coilovers,3.91,Trutrac,billet caps,DSS axles,HE offest,built TR6060,1LE diffuser,Havoc spoiler,SSclones,20in MRR 017, Pirelli P Zero, Nitto NT555RII
More to come. |
09-05-2020, 09:59 PM | #28 |
Drives: 2014 1le 1SS CRMT Join Date: Apr 2014
Location: Boston mass
Posts: 1,185
|
|
|
|
|
|