What Did You Do To Your Camaro Today?

[Troublemaker69]

Originally Posted by Angrybird 12

Made a couple cell phone holders that clip to the console side panels using my 3 D printer.

Those look cool! How much are you charging to custom make these?

Suggestion: cut a line down the front of it, no bigger than 1/4", and then a "hole" at the bottom, so you don't have to put the phone in there upside down when connected to a charger cable.

[Welker2]

After 4 trips to Vegas and 2 trips into Utah over the last 10 days and having our youngest granddaughter spend her spring break with us, I was finally able to get out and wash all the bugs & road grim off of it tonight. Still shines like a mirror ...

[Tim_Hamilton]

Originally Posted by Hetfield03

Your paint job.

Thank you!

[Angrybird 12]

Originally Posted by Troublemaker69

Those look cool! How much are you charging to custom make these?

Suggestion: cut a line down the front of it, no bigger than 1/4", and then a "hole" at the bottom, so you don't have to put the phone in there upside down when connected to a charger cable.

Easier to get in and out of the holder without looking to align the cable to the slot.

[Angrybird 12]

Originally Posted by Jonesm24

I WANT ONE!!! That's awesome! Seriously though, can I buy one from ya?

Let me think about that. It's one thing making stuff for myself but making things and selling them is a whole different thing. Like I don't know if they will hold up in the summer heat. I would hate to sell some and a week later they break apart.. I hope you under stand.

[Caseyls3]

Put the top down first time this year...








Sent from my iPhone using Tapatalk Pro

[PeteD]

A little wash and wax,,,,,,,,,,,,,and a drive to town with the wife

[BIO-HAZARD]

Made new dash plaque boards up last night . Got BIO-HAZARD off the battery tender this morning . Took it out to warm up the wheels and set the tire pressures. Then back home cleaned it up did the wheels , then ripped off the center rear bow tie and touched up the black on the inside and re mounted it. Put it back in the garage and covered it . I'll be driving it Tues to work ... then only 7 days for the 1st car show Next Sunday .. about time ....

[myold88]

Emily just got her Ct drivers license at 16 and I had promised her she could take
the SS out for a spin by herself. In 20 minutes she was back safe and sound.
PHEW !!

[riozlander]

put my new over grill on at work

[BIO-HAZARD]

Originally Posted by myold88

Emily just got her Ct drivers license at 16 and I had promised her she could take
the SS out for a spin by herself. In 20 minutes she was back safe and sound.
PHEW !!

Congrats to her . And your a nice dad ....LOL...

This morning after warming up the tires I stopped by my sons house . and he said can I take it for a spin . He's 28 years old & I said nope...

[BlazeNGlory]

Originally Posted by myold88

Emily just got her Ct drivers license at 16 and I had promised her she could take
the SS out for a spin by herself. In 20 minutes she was back safe and sound.
PHEW !!

You're a cool (and very, very trusting) Dad! What a lucky daughter!

[Welker2]

Originally Posted by myold88

Emily just got her Ct drivers license at 16 and I had promised her she could take
the SS out for a spin by herself. In 20 minutes she was back safe and sound.
PHEW !!

Good going dad! Back when my daughter went for her license, I let her take my recently (at the time) fully restored '82 Corvette. While we were waiting for to test, I was noticing it was taking most about 15-20 minutes to take their test drives, my daughter was done in less then 5 minutes and I thought she failed. When they got out of the car, I asked the evaluator what went wrong; he said nothing, if I was willing to let her drive that car, she definitely must be a good a driver and she passed ... lol.

[FireTVgod]

bought more stuff that i dont need for it...............