You are browsing camaro5 
 |
|
03-07-2016, 03:17 AM
|
#1 |
 Drives: 2014 Camaro SS 1LE Join Date: Jul 2014
Location: Plano, TX
Posts: 387
|
Feeler 2014 2SS 1LE Black
The car has 4,700 miles on it roughly. I was building this to turn it into a drag car so I didn't shy away from buying the best. Car doesn't have sun roof or Recaro seats, but all other opitions are in it. I have included on picture and the build list. If you build a motor for this car and put a cage in it you could run 9s all day long. I have a little over 30k in parts in it. I am looking for $48k. I can email you the build sheet that is easier to read than the copy and paste of it.
Engine: ADM Cold Air Intake Sealed $375.99 Nick Williams 102mm Throttle Body $629.95 FAST Intake Manifold $799.99 2014 ZL-1 Low Mile Injectors $180.00 Injector Flow Testing Highest Flow on #7 & #8 $79.99 Lingenfelter 160 degree thermostat $24.95 Heads milled 0.40 $80.00 Holley Black Valve Covers $187.95 BTR .660 Springs $299.99 BTR Push rods $109.99 GM Head Bolts & Assorted Gaskets $119.99 LG Motorsports G6X3 Cam $599.99 PB 25% Underdrive Pulley $230.95 Katech Billet Belt Tensioner $119.95 MSD 2 Step Clutch Micro Switch $199.99 Hurst Line Lock $204.95 Nitrous: Nitrous Outlet 102mm Plate System $844.99 Nitrous Outlet Purge System $119.99 Nitrous Outlet Fuel Cell $899.99 Nitrous Outlet Rear Hatch Bottle Mount $149.99 Nitrous Outlet Bottle Heater w/ Pressure Switch $199.99 Nitrous Outlet Bottle Blanket $49.99 Nitrous Outlet Extra 10lb w/ Gauge $219.99 Nitrous Outlet Center Console Switch Plate $69.99 NOS Progressive Mini Controller $265.95 Exhaust: B&B Exhaust 1 7/8” headers $1099.99 Header Thermal Coating $280.00 B&B Exhaust 3” Fusion Cat Back w/ & w/o Cats $1799.99 Innovate Motorsports LC-2 Drivers Collector $149.99 Clutch: LT1-S Organic Triple Disc - Rated at 1000 RWHP/RWTQ $1899.99 Tick Performance Stainless Braided Clutch Line $129.99 Monster Billet Release Bearing Support $79.99 Monster 36” Remote Bleeder $39.99 Transmission: Tick Performance Level 3 TR-6060 Rebuild 700RWTQ and up $3199.99 MGW Short Throw Stock Boot & Ball $399.99 Driveshaft: Driveshaft Shop 3.5” Aluminum $899.99 Rearend: Lingenfelter Camaro SS 9.5 Inch Differential Preload 4.10 $4975.00 Bladder: Lingenfelter Differential Vent Bladder Kit $129.99 Axles: Driveshaft Shop HD 1400 HP Axles $1499.99 Extra set of axles 0 miles on them $1499.99 Suspension: BMR Subframe Connectors $319.95 BMR Tunnel Brace $49.95 BMR Driveshaft Loop $129.95 BMR Toe Rods Non-adjustable $89.95 BMR Lower Control Arms Non-adjustable $369.95 BMR Trailing Arms Non-adjustable $109.95 BMR Extreme Rear Anti-roll Bar $389.95 BMR Front 1” Springs $119.99 BMR Rear 1.4” Springs $129.99 BMR Rear Cradle Bushing Kit $179.95 BMR Differential Bushing Kit $39.95 BMR Outer Trailing Arm Bushing Kit $19.95 BMR Upper Control Arm Inner Bushing Kit $59.99 Additional: HP Tuners Pro w/ 4 Credits Remaining $649.99 Weld RT-S Front 18”x5.5 Polished Aluminum w/ Tires $850.00 Weld RT-S Front 17”x10” Polished Aluminum $944.26 Hoosier 28”x10”x17” Slick $443.94 Front & Rear Black Bow Tie Not Installed $178.62 Last edited by Tim14ILE; 03-07-2016 at 03:34 AM. |
|
|
|
03-07-2016, 05:26 AM
|
#2 |
|
ultracrepidarianism
Drives: '14 1SS/RS/1LE/NPP '18 Accord Sport Join Date: Mar 2014
Location: where folks drive like shit
Posts: 1,297
|
very nice. GLWS.
__________________
 |
|
|
|
|
03-07-2016, 07:38 AM
|
#3 |
|
Drives: 2014 Camaro SS 1LE Join Date: Jul 2014
Location: Plano, TX
Posts: 387
|
Thank you very much
|
|
|
|
|
03-07-2016, 08:08 PM
|
#4 |
   Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009
Location: Reading, PA
Posts: 1,040
|
Very nice build man! Good luck with the sale.
|
|
|
|
|
04-18-2017, 11:52 PM
|
#5 |
|
Drives: 2014 Camaro SS 1LE Join Date: Jul 2014
Location: Plano, TX
Posts: 387
|
Bump really want to get this moved. Send me reasonable overs. I have added BMR engine mounts and stiffer trans mount.
|
|
|
|
|
|
|
|
 |
|
|
