You are browsing camaro5 
 |
|
05-16-2017, 12:11 AM
|
#1 |
 
Drives: Camaro SS Join Date: May 2017
Location: RGV
Posts: 16
|
Camaro SS
Just got this ss off a friend i am also new here been looking thu sum post i got a few ideas let me know what you think ... and changes i can make i ordered the plate holder already lol...
|
|
|
|
05-16-2017, 12:40 AM
|
#2 |
 Drives: 2010 2SS/RS L99 Join Date: Oct 2015
Location: Fort Wayne, IN
Posts: 295
|
Good looking car. Some of my favorite mods were Hi Flow cats (jba), catback exhaust(those two will give you a nice power jump along with great sound, and if you wanna take it a step further look into long tube headers and/or a custom tune) I did the front grill bow tie delete, tinted windows, zl1 replica wheels, PAC Audio dash kit for aftermarket stereos, custom sound system, (recommend harnesses by subthumb if you are into audio) back up camera, cold air inductions intake (probably the most popular on this site and looks great, but it is pricey at $400.) There's really no limit to what can do to these cars and the aftermarket is HUGE. Check out Phastek for a nice selection.
|
|
|
|
|
05-16-2017, 10:44 AM
|
#3 |
           
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,230
|
Great looking car. Aaron0731 is steering you in the right direction.
__________________
 STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
|
|
|
|
05-16-2017, 06:47 PM
|
#4 |
|
Drives: Camaro SS Join Date: May 2017
Location: RGV
Posts: 16
|
thanks for comments i did a lil smoke on back tail lights blacked out the back reflectors on sides need to do front ones too... thinking of doing the emblems black too front and back and add motor mods... boltons ect prob going to tune it next week...
|
|
|
|
|
05-16-2017, 06:52 PM
|
#5 |
|
Drives: Camaro SS Join Date: May 2017
Location: RGV
Posts: 16
|
back end...
|
|
|
|
|
05-17-2017, 01:46 PM
|
#6 |
|
A legend in his own mind
Drives: 2010 2SS/RS M6 Join Date: May 2013
Location: Long Island, New York
Posts: 914
|
Looks like a great start! Personally, id lose the stripes on the bumper by the plate. The rest looks fine. Either way, enjoy the modding
__________________
2010 2SS/RS "The Mistress"
Color matched OEM GFX / VIS Carbon Fiber Hood (absolute trash quality and customer service ) / Heritage Grille / 5% Windows / 30% Windshield tint with 5% visor strip / Tinted Exterior Lights / Streetfighter LA Spoiler / Morimoto XB LED fogs / LED sidemarkers / Airaid CAI / Hurst Short Throw / TSP LT's / No cats / No resonator / Corsa Xtreme Catback / Trifecta Tune / Factory amp replaced / 2 JL Audio 12's / MRR 228 Wheels / BMR Springs / Koni Yellows / R1 Concepts Rotors & Pads 2006 Dodge Magnum RT "The daily" |
|
|
|
|
05-17-2017, 03:51 PM
|
#7 |
|
Looks sweet!
__________________
SOLD: 2010 2SS/RS L99-A6
 K&N CAI, Speed Engineering Long Tube Headers, Stainless Works hi-flow cats, Flowmaster American Thunder Cat-back. Tuned by Corvettes of Westchester. 1/LE rear suspension conversion, Bilstein B6 Stuts/shocks. |
|
|
|
|
05-17-2017, 10:16 PM
|
#8 |
 
Drives: 2013 Black SS/RS Join Date: May 2017
Location: West Texas
Posts: 133
|
I would move that plate down with a Jac Fab bracket and those extended stripes would look lots better IMO.
|
|
|
|
|
05-17-2017, 11:44 PM
|
#9 |
 
Drives: 2011 VR SS Vert Join Date: Aug 2015
Location: Minneapolis
Posts: 375
|
black bow tie? I am tempted to outline it in red though. I bought this used also. When I bought it she already had pfadt 1.25" lowering springs, foose wheels, slp loudmouth II (love that deceleration burble) and the skip shift eliminator. One if the first things I did was get the harness so the drl's and halo's can be on at the same time. Then added the GTO reservoir to separate the clutch fluid from the brake fluid. Got the strut tower covers from someone here on the forum. Just got the CAI this spring. PM DynoSteve for a great price if interested. I did some researching and his was the best price I could find. Once I have the $$ I would also like to upgrade the stereo using the pac unit. Mine is a 1SS so it has the base stereo, not a great system. Like others have said there is so much you can add, just a decision on which are the most important. Good Luck!
Mr V |
|
|
|
|
05-18-2017, 01:54 PM
|
#10 | |
|
Drives: Camaro SS Join Date: May 2017
Location: RGV
Posts: 16
|
Quote:
|
|
|
|
|
|
05-18-2017, 01:56 PM
|
#11 | |
|
Drives: Camaro SS Join Date: May 2017
Location: RGV
Posts: 16
|
Quote:
|
|
|
|
|
|
05-19-2017, 12:00 AM
|
#12 |
 Drives: Altima (for now) Join Date: Apr 2015
Location: Wooster, OH
Posts: 86
|
Absolutely love it! Great pics!!
|
|
|
|
|
05-21-2017, 02:44 PM
|
#13 | |
|
Drives: Camaro SS Join Date: May 2017
Location: RGV
Posts: 16
|
Quote:
|
|
|
|
|
|
|
|
|
 |
|
|
