You are browsing camaro5 
 |
|
05-21-2017, 02:30 PM
|
#1 |
 Drives: 2013 ZL1 Yeh! Join Date: Dec 2013
Location: Vancouver WA
Posts: 29
|
Ohlind suspension = limited to 85 mph?
I am at the track with new ohlins suspension installed and discovered the car is limited to 85 mph. The car can rev to redline below 85 mph, which indicates not an engine issue. Does anyone know how to override this? Thanks.
Anthony 2013 zl1 |
|
|
|
05-21-2017, 03:26 PM
|
#2 |
           
Drives: 2012 ZL1 - #670 Join Date: Jun 2009
Location: Seminole, Fl.
Posts: 8,009
|
How did you resolve the lack of MRC, because I bet the computers are going crazy limiting your speed.
__________________
 |
|
|
|
|
05-21-2017, 04:06 PM
|
#3 |
|
Drives: 2013 ZL1 Yeh! Join Date: Dec 2013
Location: Vancouver WA
Posts: 29
|
I am at the track and just discovered the problem. Never occurred to me to check for something like that. I generally dont dont drive over 85mph on the street; low speed limits in the northwest. At least the car handels well!
|
|
|
|
|
06-11-2017, 11:35 AM
|
#4 |
|
Drives: 2013 ZL1 Yeh! Join Date: Dec 2013
Location: Vancouver WA
Posts: 29
|
Update. A shop was able to tune out the speed limiter by setting it to 300mph. I am not sure if the shop used the tek 2 or row software tools. The suspension system failure warning is still present, which i hope to correct with shock silmulators.
The min speed in the corners was improved by approximately 3mph in some corners with the speed limited to 80mph.. By the end of the month i should be able to take it to the track and set a new lap time. |
|
|
|
|
|
|
|
 |
|
|
