![]() |
|
|
#1 |
![]() ![]() ![]() Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,227
|
Amplifier Question
So where does everyone ground their new amps to? im having some alt whine n hiss.
|
|
|
|
|
|
#2 |
|
Account Suspended
Drives: 2010 Camaro Join Date: May 2014
Location: Alabama
Posts: 1,971
|
What a coincidence. I'm new to the sound system scene and I'm installing a powered subwoofer. I did extensive research and found that grounding to the battery is good.
Unfortunately, I'm waiting on a part that won't be here until Thursday to complete my installation. I'm still interested to see where this goes. |
|
|
|
|
|
#3 | |
![]() ![]() ![]() Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,227
|
Quote:
I have al wires OFC same brand. all grounded where they should be ( distro block to one ground ) and no idea whats wrong. i have tried a few spots. |
|
|
|
|
|
|
#4 | |
|
Account Suspended
Drives: 2010 Camaro Join Date: May 2014
Location: Alabama
Posts: 1,971
|
Quote:
That sounds above my pay grade. I'm doing a simple subwoofer and from everything I've read I shouldn't get this problem. Is your ground super short? I've read that your ground must be as short as possible. Like ridiculously short, less than 2-3 feet! |
|
|
|
|
|
|
#5 |
|
ILSQ
Drives: '13 2SS/RS Join Date: Feb 2017
Location: Flatlands
Posts: 322
|
Have you cleared the ground area of ALL paint? This usually seems to be the first troubleshooting problem with ground issues. Next, are you running the speaker wires and RCA's on the other side of the car from the power wires. If they do cross each other, it should be at a right angle, if possible. Also, check to make sure all the RCA's are tight into the HU and amps.
__________________
Way too many mods to list, and just getting started...
|
|
|
|
|
|
#6 | |
![]() ![]() ![]() Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,227
|
Quote:
|
|
|
|
|
|
|
#7 |
|
ILSQ
Drives: '13 2SS/RS Join Date: Feb 2017
Location: Flatlands
Posts: 322
|
I'm now on my 3rd try for my front stage amp, bcuz of the same issue. My installer told me the 2 Mmats amps I gave him did not like to live directly over my battery, even though the air compressor cover has been reinforced with 3/4 MDF. He tried 4 amps he had around the shop, and the Arc XDi1200.6 is the only one that has a quiet noise floor in that position. I am now trying to work a deal for an Arc, which I sold to buy the Mmats! Oh, the irony of it all!
__________________
Way too many mods to list, and just getting started...
|
|
|
|
|
|
#8 |
|
Put the top down!
Drives: 2013 Camaro 2SS Convertible Join Date: Jan 2017
Location: Sunny Southern Idaho
Posts: 17
|
Do you have any loops of cable anywhere? They'll act as antennas.
__________________
![]() 2013 2SS Convertible 1961 Dodge D100 1964 Corvair Monza |
|
|
|
|
|
|
|
![]() |
|
|