05-23-2017, 08:48 AM | #1 |
Drives: 72 Chevelle Join Date: May 2014
Location: United States
Posts: 55
|
2013 Brakes
SOLD
Front and rear. I had the rotors turned because they had been sitting in my garage and got a bit rusty. These were removed from a totaled 2013 ZL1 with 17K miles, most of the parts were sold in these posts: http://www.camaro5.com/forums/showthread.php?t=409034 http://www.camaro5.com/forums/showthread.php?t=448313 Pads are in good shape. Left front caliper has a paint chip on the "end" of the caliper, I don't think it would be seen when it's on the car. One of the rears has a chip on the front/top. Both can be seen in the pics. Also there are a few minor scratches. Any of this would be pretty easy to touch up, I just don't want to do it and have it appear that I'm hiding something. $1500 plus shipping. Shipping will likely be $75-$100 depending on your location (in the US). [IMG]IMG_0707 by grsible, on Flickr[/IMG] [IMG]IMG_0709 by grsible, on Flickr[/IMG] [IMG]IMG_0708 by grsible, on Flickr[/IMG] [IMG]IMG_0710 by grsible, on Flickr[/IMG] [IMG]IMG_0715 by grsible, on Flickr[/IMG] [IMG]IMG_0716 by grsible, on Flickr[/IMG] [IMG]IMG_0713 by grsible, on Flickr[/IMG] [IMG]IMG_0712 by grsible, on Flickr[/IMG] Last edited by CITM; 06-13-2017 at 07:55 AM. |
05-24-2017, 03:53 AM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,088
|
Would you sell
Front Rotors only???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
05-24-2017, 09:26 AM | #3 |
Drives: 72 Chevelle Join Date: May 2014
Location: United States
Posts: 55
|
|
05-24-2017, 12:30 PM | #4 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,088
|
How's your Chevelle coming along???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
05-24-2017, 06:05 PM | #5 |
Drives: 72 Chevelle Join Date: May 2014
Location: United States
Posts: 55
|
Getting there! Thanks for asking. It is painted and being assembled right now! It'll be late summer at the earliest. Lots of parts yet to buy to get it going.
|
05-28-2017, 05:08 PM | #6 |
Wow what a deal
|
|
05-28-2017, 08:23 PM | #7 |
Drives: 2015 Chevy Camaro 1SS Join Date: Jun 2016
Location: Hampton, Va
Posts: 53
|
how much material did the shop take off the rotors?
|
05-29-2017, 01:44 PM | #8 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,088
|
This guy is a great seller and the brakes can be upgraded to a 2015+ Z06 non CCM caliper for about 120 bucks. Would be a great buy for anyone wanting a good track setup!!!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
05-30-2017, 11:44 AM | #9 |
Drives: 72 Chevelle Join Date: May 2014
Location: United States
Posts: 55
|
|
06-13-2017, 07:55 AM | #10 |
Drives: 72 Chevelle Join Date: May 2014
Location: United States
Posts: 55
|
SOLD
|
|
|
|
|