Spark Plug Wires - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Blackandwhite · 05-30-2017, 11:31 AM

Alright so i have a 2015 ZL1. I'm getting Kooks LT headers with the HI-FLO cats soon. Leave the catback stock for now and getting that mild2wild controller for the NPP exhaust. The guy installing it said to get spark plug sleeves but i feel weird just getting sleeves and plus i feel like getting some from auto zone doesn't feel right for a ZL1. So i might just upgrade and get spark plug wires. I heard MSD is too short for wires so i've been looking at Taylor wires. I called their tech support because i couldn't find which ones fit the 15 ZL1. This is the name and part number. Taylor StreeThunder Spark Plug Wire Sets #51044. These look alright but i'm really torn on what to get. Please help/share your opinions on what i should do/get.

Blackandwhite · 05-30-2017, 11:59 AM

bump

SSEssence · 05-30-2017, 01:00 PM

I'm running the Taylor 409 10.4mm wires without sleeves, but I may add sleeves later on. You can also check out JBA PowerCables.

07-SRT · 05-30-2017, 01:01 PM

I have taylor 409 perfect fit and good up to 600°

Blackandwhite · 05-30-2017, 04:53 PM

I was going to go with the taylor 10.4 but according to summit racing, it's not compatible with my 2015 ZL1.

bayarea408 · 05-30-2017, 06:00 PM

i use a set from PCM of NC, really high quality and the fitment is really nice. I have turbo manifolds that have a even tighter clearance then longtube headers and these were perfect along with a DEI heat socks, dont buy the socks in black hard to see burns or if you made contact. picture of the fitment below.

PapaKlutch · 05-30-2017, 06:53 PM

I have the JDP Motorsports Spec'ed Taylor Thundervolt 8.2mm Spark Plug Wires with the boot made for header clearance and the thermal socks.

Been on for 1 year/5000 miles with no issues.

davidscamaro · 05-30-2017, 10:38 PM

Quote:

Originally Posted by Blackandwhite

I was going to go with the taylor 10.4 but according to summit racing, it's not compatible with my 2015 ZL1.

Unless your coil packs are in different location from a SS they will work fine. I'm using the Taylor 409 too with zero complain

rontammy0 · 05-30-2017, 10:49 PM

I just replaced my jba power cables with a set of the MSD. I read they were short but they fit fine...i like the fact the spark plug boot is very narrow and is a good distance away from the header. Plus you can bend them a bit as well. Heres a pic of them.

https://www.google.ca/search?q=pictu...a_LYhqjpinfRM:

rontammy0 · 05-30-2017, 10:55 PM

Quote:

Originally Posted by SSEssence

I'm running the Taylor 409 10.4mm wires without sleeves, but I may add sleeves later on. You can also check out JBA PowerCables.

3 years of JBA power cables on my summer only driven SS......the are dried right out and cracked. Thats why I had to replace them. No sleeves used.

Camaro Dude · 05-30-2017, 11:10 PM

No one believes in OEM or O.E wires anymore???

Olddudesrule · 05-30-2017, 11:40 PM

I'm running OEM wires with thermal socks. No issues, runs great at the track or on the street.

07-SRT · 05-31-2017, 06:23 AM

Quote:

Originally Posted by Camaro Dude

No one believes in OEM or O.E wires anymore???

I was until the oem Spark pkug wire connection at coil pack was bad....

Dega Man · 05-31-2017, 07:56 AM

Haven't had the first problem with the MSD wires, running ARH 2 inch headers.

05-30-2017, 11:31 AM	#1
Blackandwhite Drives: 2015 Camaro ZL1 Join Date: Jan 2013 Location: New York Posts: 74 View My Garage	Spark Plug Wires Alright so i have a 2015 ZL1. I'm getting Kooks LT headers with the HI-FLO cats soon. Leave the catback stock for now and getting that mild2wild controller for the NPP exhaust. The guy installing it said to get spark plug sleeves but i feel weird just getting sleeves and plus i feel like getting some from auto zone doesn't feel right for a ZL1. So i might just upgrade and get spark plug wires. I heard MSD is too short for wires so i've been looking at Taylor wires. I called their tech support because i couldn't find which ones fit the 15 ZL1. This is the name and part number. Taylor StreeThunder Spark Plug Wire Sets #51044. These look alright but i'm really torn on what to get. Please help/share your opinions on what i should do/get.

05-30-2017, 01:01 PM	#4
07-SRT Drives: 2022 Camaro SS 1LE Join Date: Sep 2011 Location: Jacksonville, Fl Posts: 714	I have taylor 409 perfect fit and good up to 600° Attached Images __________________ 2022 Camaro SS 1LE

05-30-2017, 06:00 PM	#6
bayarea408 Drives: T Join Date: Mar 2015 Location: CA Posts: 805	i use a set from PCM of NC, really high quality and the fitment is really nice. I have turbo manifolds that have a even tighter clearance then longtube headers and these were perfect along with a DEI heat socks, dont buy the socks in black hard to see burns or if you made contact. picture of the fitment below. Last edited by bayarea408; 05-30-2017 at 06:28 PM.

05-30-2017, 06:53 PM	#7
PapaKlutch Drives: 2015 Camaro SS/1LE Join Date: May 2015 Location: Nevada Posts: 951	I have the JDP Motorsports Spec'ed Taylor Thundervolt 8.2mm Spark Plug Wires with the boot made for header clearance and the thermal socks. Been on for 1 year/5000 miles with no issues. __________________ 2015 2SS/1LE/RECARO/NPP/RS/NAV

05-30-2017, 11:40 PM	#12
Olddudesrule Resident nomad Drives: 2014 Summit White 1SS/1LE Join Date: Nov 2015 Location: Gilbert, AZ Posts: 1,765	I'm running OEM wires with thermal socks. No issues, runs great at the track or on the street. __________________ Sold: 2007 Z06 2002 Viper GTS/ACR 2003 Z06 1965 FFR Cobra 2012 Nissan 370Z ADM LSA Stage II, Roto-Fab CAI, Kooks LTH/HFC's, Phastek CC, ported TB, Mishimoto radiator and oil cooler, BC Racing ER Series CO's, JPSS 32mm Black Magic rear bar, JPSS front inserts, R1 Concepts Premier slotted rotors/Goodrich SS lines, Schroth ASM harness, MGW flatstick, Brey-Krause HB, Tuned by NicD, at Cordes Performance Racing.

05-30-2017, 11:59 AM	#2
Blackandwhite Drives: 2015 Camaro ZL1 Join Date: Jan 2013 Location: New York Posts: 74 View My Garage	bump

05-30-2017, 01:00 PM	#3
SSEssence Instagram: Sangstah Drives: 2019 Camaro 1LE Join Date: Sep 2016 Location: Buena Park, CA. Posts: 2,836 View My Garage	I'm running the Taylor 409 10.4mm wires without sleeves, but I may add sleeves later on. You can also check out JBA PowerCables.

05-30-2017, 04:53 PM	#5
Blackandwhite Drives: 2015 Camaro ZL1 Join Date: Jan 2013 Location: New York Posts: 74 View My Garage	I was going to go with the taylor 10.4 but according to summit racing, it's not compatible with my 2015 ZL1.

05-30-2017, 10:49 PM	#9
rontammy0 Account Suspended Drives: 2011 2SS/ RS INFERNO ORANGE L99 Join Date: Dec 2012 Location: Alliston Ontario Canada Posts: 9,057 View My Garage	I just replaced my jba power cables with a set of the MSD. I read they were short but they fit fine...i like the fact the spark plug boot is very narrow and is a good distance away from the header. Plus you can bend them a bit as well. Heres a pic of them. https://www.google.ca/search?q=pictu...a_LYhqjpinfRM:

05-30-2017, 11:10 PM	#11
Camaro Dude Drives: ‘13 1LE Join Date: Jul 2013 Location: Earth Posts: 3,904	No one believes in OEM or O.E wires anymore???

05-31-2017, 07:56 AM	#14
Dega Man Drives: ZL1 Join Date: Oct 2012 Location: Talladega Posts: 651	Haven't had the first problem with the MSD wires, running ARH 2 inch headers.