Exhaust install - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

winterboy8 · 06-05-2017, 07:11 AM

I installed a new Stainless Works 3" chambered catback this weekend. Between the x-pipe brackets being above the tunnel brace and trying to line up the tailpipe tips, it got me a little frustrated. Anyway, after I got home the right rear tip is now touching the side part of the rear bumper. So, I guess suggestions would be welcome. I thought of bringing to a muffler shop to let them try to align it. Also, I found the GM rubber hanger (Muffler & Pipe Insulator - GM (92231199)) and thought I could replace it with after market to get the tips where they need to be. Anyone know what the dimensions are on this? Thanks

06-05-2017, 07:11 AM	#1
winterboy8 Drives: 2015 ZL1 Blue Velvet Metallic Join Date: Mar 2015 Location: Melbourne, FL Posts: 720 View My Garage	Exhaust install I installed a new Stainless Works 3" chambered catback this weekend. Between the x-pipe brackets being above the tunnel brace and trying to line up the tailpipe tips, it got me a little frustrated. Anyway, after I got home the right rear tip is now touching the side part of the rear bumper. So, I guess suggestions would be welcome. I thought of bringing to a muffler shop to let them try to align it. Also, I found the GM rubber hanger (Muffler & Pipe Insulator - GM (92231199)) and thought I could replace it with after market to get the tips where they need to be. Anyone know what the dimensions are on this? Thanks __________________ Roto-Fab CAI, ARH LT, SW 3" catback, JRE tune, Elite-2 CC, VMAX TB, Big Gulp, WW II relo, Lingenfelter S/C reservoir