MY link nav with retrofit harnesses from DIYgen5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

12SilverBulletSS · 06-03-2017, 12:48 PM

Alright, so I went back to the stock radio in prior to trading the car in. The navigation faceplate and radio are out of a 2015 Camaro with heated seats and the screen is mint. You will need to program the radio and get some new terminals for harness. I couldn't get them out of the connector so I cut them off flush.

This is the newest offering and it transfers the backup camera to the radio (or maybe does both, can't remember). It also includes the GPS receiver so that is not a problem either. The whole thing was working fine when removed.
SOLD!

Deputy347k9 · 06-03-2017, 03:45 PM

On an early May post you stated the air conditioning was not working with this faceplate but all the other controls were good. Did you get this problem fixed? I have a friend that is in the market for a MyLink setup. if the screen has not been repaired would you consider selling just the radio/Nav unit it self? Would only need the GPS antenna that plugs into the blue socket, the cut wires are not needed.

12SilverBulletSS · 06-03-2017, 03:54 PM

I swapped the factory unit back in and the AC was dead. I drove it 3 hours to trade in with no AC in Texas! Dealer said the compressor was dead and knocked $1,000 off trade-in value. So I can say it was not the faceplate.

12SilverBulletSS · 06-06-2017, 05:18 PM

Sold, I do have the 2012 conversion cables if anyone is interested.

chidoaguilar · 06-07-2017, 02:52 PM

Quote:

Originally Posted by 12SilverBulletSS

Sold, I do have the 2012 conversion cables if anyone is interested.

So I'm planning on buying a my link radio in the near future for my car, is this the aftermarket cable harness that I would need for the radio? Thanks

Sent from my SAMSUNG-SM-G920A using Tapatalk

06-03-2017, 12:48 PM	#1
12SilverBulletSS Drives: 2017 Camaro SS 1LE Join Date: Apr 2017 Location: Abu Dhabi Posts: 78	MY link nav with retrofit harnesses from DIYgen5 Alright, so I went back to the stock radio in prior to trading the car in. The navigation faceplate and radio are out of a 2015 Camaro with heated seats and the screen is mint. You will need to program the radio and get some new terminals for harness. I couldn't get them out of the connector so I cut them off flush. This is the newest offering and it transfers the backup camera to the radio (or maybe does both, can't remember). It also includes the GPS receiver so that is not a problem either. The whole thing was working fine when removed. SOLD! Attached Images Last edited by 12SilverBulletSS; 06-06-2017 at 05:17 PM.

06-03-2017, 03:45 PM	#2
Deputy347k9 Drives: 2014 Ashen Gray Convertible Join Date: Apr 2017 Location: Havelock, NC Posts: 1,328	On an early May post you stated the air conditioning was not working with this faceplate but all the other controls were good. Did you get this problem fixed? I have a friend that is in the market for a MyLink setup. if the screen has not been repaired would you consider selling just the radio/Nav unit it self? Would only need the GPS antenna that plugs into the blue socket, the cut wires are not needed.

06-03-2017, 03:54 PM	#3
12SilverBulletSS Drives: 2017 Camaro SS 1LE Join Date: Apr 2017 Location: Abu Dhabi Posts: 78	I swapped the factory unit back in and the AC was dead. I drove it 3 hours to trade in with no AC in Texas! Dealer said the compressor was dead and knocked $1,000 off trade-in value. So I can say it was not the faceplate.

06-06-2017, 05:18 PM	#4
12SilverBulletSS Drives: 2017 Camaro SS 1LE Join Date: Apr 2017 Location: Abu Dhabi Posts: 78	Sold, I do have the 2012 conversion cables if anyone is interested.