Torque Solutions motor mounts - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Clarkstar · 06-03-2017, 09:19 PM

Can someone give some feedback on these if you have them. Preferably someone who has had them on for a long time. Are there rattles all over now??? Have there been any negative long term effects? I'm not really worried about sound or vibration, I just don't want rattles popping up or things coming loose.

Thanks!

hazy · 06-03-2017, 11:51 PM

i just looked up their website. Looks EXACTLY like what I got off of ebay for around $90-100 quite some time ago.

No issues to report after probably 15k on them, but do some shopping around and you can definitely find them cheaper than they're listed on the TorqueSolutions website

Clarkstar · 06-04-2017, 06:37 AM

Yeah, there on flebay for $149...

The BMR units look nice, but the price is double, and some have said that after they break in its hard to notice a difference.

Clarkstar · 06-04-2017, 07:01 PM

Anyone else???

Clarkstar · 06-07-2017, 06:39 AM

Nobody???

spadz93 · 06-07-2017, 07:11 AM

I bought prothanes. Figured the things holding my motor up probably shouldn't be cheaped out on.

frankwjr · 06-07-2017, 09:16 AM

Quote:

Originally Posted by spadz93

I bought prothanes. Figured the things holding my motor up probably shouldn't be cheaped out on.

+1...Jannety also uses these mounts....initial NVH has smoothed out with drivin but you still know(and I like it) the motor has got a direct connection to the car, smoother shifts and overall "tighter" feel to the car....and these things are a freakin work of CNC art...to bad have to hide them...good luck

Clarkstar · 06-12-2017, 09:18 PM

Anyone else have these (torque Solutions) mounts on their car? I see Phastek sells them too...

Just because the price is less than the Prothanes, doesn't necessarily mean they are cheap...or less reliable.

Synner · 06-12-2017, 09:34 PM

They are very rough but I also have a lot of solid bushings and a rockin cam. There's nothing cheap about them but the surface area of the bushing is small so you'll feel it. For a DD I would use prothane.

Clarkstar · 06-13-2017, 06:42 AM

Quote:

Originally Posted by Synner

They are very rough but I also have a lot of solid bushings and a rockin cam. There's nothing cheap about them but the surface area of the bushing is small so you'll feel it. For a DD I would use prothane.

Have you had any issues with electronics because of the rattles??? I think maybe I'm just over thinking this....

xc_SS/RS · 06-13-2017, 10:46 AM

If you install them please post a review. I've noticed my motor shifts enough in turns (hard right turns) that the header will rub the steering column. Not a hard rub, just enough to notice it and slow down a bit till it stops.

I am contemplating these mounts or ZL1 engine mounts. Not too worried about the added vibration, but don't want it to rattle my fillings out...

Clarkstar · 06-13-2017, 02:04 PM

Quote:

Originally Posted by xc_SS/RS

If you install them please post a review. I've noticed my motor shifts enough in turns (hard right turns) that the header will rub the steering column. Not a hard rub, just enough to notice it and slow down a bit till it stops.

I am contemplating these mounts or ZL1 engine mounts. Not too worried about the added vibration, but don't want it to rattle my fillings out...

My thoughts exactly...

Synner · 06-13-2017, 07:39 PM

No it doesn't hurt electronics and people have reviewed them before if you search.

Clarkstar · 06-14-2017, 06:39 AM

Quote:

Originally Posted by Synner

No it doesn't hurt electronics and people have reviewed them before if you search.

I did search, alot of reviews right after install. I was looking for someone with a long term review... as my original post states. If you found some long term reviews please share the links...

06-03-2017, 09:19 PM	#1
Clarkstar Drives: 2013 1SS 1LE Join Date: Jun 2016 Location: Ixonia wi Posts: 1,456	Torque Solutions motor mounts Can someone give some feedback on these if you have them. Preferably someone who has had them on for a long time. Are there rattles all over now??? Have there been any negative long term effects? I'm not really worried about sound or vibration, I just don't want rattles popping up or things coming loose. Thanks! __________________ 2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle. 603 h.p. 495 ft lbs tq.

06-04-2017, 06:37 AM	#3
Clarkstar Drives: 2013 1SS 1LE Join Date: Jun 2016 Location: Ixonia wi Posts: 1,456	Yeah, there on flebay for $149... The BMR units look nice, but the price is double, and some have said that after they break in its hard to notice a difference. __________________ 2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle. 603 h.p. 495 ft lbs tq.

06-04-2017, 07:01 PM	#4
Clarkstar Drives: 2013 1SS 1LE Join Date: Jun 2016 Location: Ixonia wi Posts: 1,456	Anyone else??? __________________ 2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle. 603 h.p. 495 ft lbs tq.

06-07-2017, 06:39 AM	#5
Clarkstar Drives: 2013 1SS 1LE Join Date: Jun 2016 Location: Ixonia wi Posts: 1,456	Nobody??? __________________ 2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle. 603 h.p. 495 ft lbs tq.

06-07-2017, 07:11 AM	#6
spadz93 BUMBL Z Drives: 2015 ZL1 Join Date: Nov 2013 Location: Northern NJ Posts: 2,577 View My Garage	I bought prothanes. Figured the things holding my motor up probably shouldn't be cheaped out on. __________________ Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq

06-03-2017, 11:51 PM	#2
hazy Drives: 2011 2SS/RS Join Date: Feb 2014 Location: H-Town Posts: 1,037	i just looked up their website. Looks EXACTLY like what I got off of ebay for around $90-100 quite some time ago. No issues to report after probably 15k on them, but do some shopping around and you can definitely find them cheaper than they're listed on the TorqueSolutions website

06-12-2017, 09:18 PM	#8
Clarkstar Drives: 2013 1SS 1LE Join Date: Jun 2016 Location: Ixonia wi Posts: 1,456	Anyone else have these (torque Solutions) mounts on their car? I see Phastek sells them too... Just because the price is less than the Prothanes, doesn't necessarily mean they are cheap...or less reliable. __________________ 2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle. 603 h.p. 495 ft lbs tq.

06-12-2017, 09:34 PM	#9
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,542	They are very rough but I also have a lot of solid bushings and a rockin cam. There's nothing cheap about them but the surface area of the bushing is small so you'll feel it. For a DD I would use prothane.

06-13-2017, 10:46 AM	#11
xc_SS/RS Drives: 2010 Camaro SS/RS Join Date: Mar 2014 Location: somewhere in MD Posts: 4,883	If you install them please post a review. I've noticed my motor shifts enough in turns (hard right turns) that the header will rub the steering column. Not a hard rub, just enough to notice it and slow down a bit till it stops. I am contemplating these mounts or ZL1 engine mounts. Not too worried about the added vibration, but don't want it to rattle my fillings out... __________________ 2010 2SS/RS Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53

06-13-2017, 07:39 PM	#13
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,542	No it doesn't hurt electronics and people have reviewed them before if you search.