Best cold air intake

[Red2014SS]

Originally Posted by 2013 Orange SS

Has any one used the Z-28 intake on a stock SS A-6 and not had it tuned. Just wondering what would happen if I did not get a tune at this time?

I put a Z-28 intake on a stock L99 and it ran fine. I replaced a Volant CAI and PowerCore filter. The car ran 7/10ths quicker and 4mph faster in the 1/4 with the Z-28 intake being the only change made. I've got the time slips to prove it.

Since then, I added LT headers and had it tuned. Runs even better now.

[Roto-fab 1]

I said I would find the information shared with us about a head to head comparison of the Roto-fab CAI and the stock Z28 CAI. Here it is. This is the actual email we received from Lethal Racing about their test. The Roto-fab CAI showed an improvement of about 4 HP and 6 ft/lb tq. Keep in mind this is a comparison of the Roto-fab and the Z28 intake, NOT the standard Camaro intake. Thanks Lethal Racing for sharing our information with us!

From: Lethal Racing [mailto:lethalracing219@gmail.com]
Sent: Tuesday, May 5, 2015 11:35 AM
To: sales@roto-fab.com
Subject: Fwd: roto compare

Hi,

Here is the graph showing the rotofab intake on a 2015 Z28 VS the stock Z28 intake(which is pretty good from the factory). The blue line is the Rotofab, Purple is the Stock intake.

Mods on the Z28 are:
Ported heads
ported intake and tb
Lethal Racing Phantom cam
Yella Terra rocker arms
Coated 1 7/8"headers without cats
LR dyno tune
93 octane




thanks,
nick
--
337-258-7692
lethal@lethalracing.com

[jshaf]

now that the Z28 is available, no brainer IMO

[GoldCartridgeGamer]

I've been very happy with my ADM Race intake with air scoop.

[klaatu barada nikto]

I am very pleased with my Z/28 intake, really like the OEM look and quality of it. The horsepower and torque increase over stock is very noticeable.

It was just what i had been waiting for.

[jshaf]

once I saw it in my engine bay I was sooo happy, and the big filter is much bigger in person the fit and finish of the z/28 makes others seem cartoonish to me. to each there own I guess. just seems funny that certain manufacturers are going the extra mile to try to prove how much more superior there product is. GM has done none of that that I know, the people that buy it know what it is about.

[klaatu barada nikto]

I find it interesting that Hennessey uses the STOCK Z/28 intake for their HPE650 upgrade - 667 Horsepower - for the Z/28.



http://www.google.com/imgres?imgurl=...FYHVgAodO-UJUA

[Cratos]

I put a CAI, Inc in this past Tuesday, and it has been amazing!
2012 - 2015 3.6L V6 Chevrolet Camaro Cold Air Intake System (Textured-Black Finish)

[Sales @ CAI Inc]

Originally Posted by Cratos

I put a CAI, Inc in this past Tuesday, and it has been amazing!
2012 - 2015 3.6L V6 Chevrolet Camaro Cold Air Intake System (Textured-Black Finish)

Thanks! We are glad that our system has met your expectations!

[Davidd_SS]

Z28 CAI, Extremely happy with it.

[Billy_Gibbs]

I just recently put a K&N Tycoon Series Cold Air Intake in my camaro. I didnt do before and after dynos but you can definitely feel and hear a difference with the horsepower.

[OlePhu]

I'm totally satisfied with my CAI on a V6 LFX. Sounds better and I can feel a difference in my buttometer. I can only imagine the affect it has on a V8. Plus, customer service through RDP and CAI was top shelf. RotoFab was my 2nd choice but I just liked the looks of the CAI a little better.

[Sales @ CAI Inc]

Originally Posted by OlePhu

I'm totally satisfied with my CAI on a V6 LFX. Sounds better and I can feel a difference in my buttometer. I can only imagine the affect it has on a V8. Plus, customer service through RDP and CAI was top shelf. RotoFab was my 2nd choice but I just liked the looks of the CAI a little better.

Thank you very much for the positive feedback. Your setup looks great!

[sherob]

Originally Posted by Davidd_SS

Z28 CAI, Extremely happy with it.

+1