07-18-2017, 11:37 AM | #1 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
HERITAGE GRILLE.
OK folks, I going out on a limb her and asking this question, I have the heritage grille and was wondering if any of you know any tricks to adding a grille emblem to it WITHOUT having to remove the front bumper cover, I just don't see any way, but maybe some of you might have found a way to do it. Thanks in advance..
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
07-18-2017, 01:57 PM | #2 |
|
I did it by removing the black metal plate around the latch. It gave me enough room to get my arm in there to get the emblem on.
__________________
|
07-18-2017, 08:10 PM | #3 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
Thanks sir, I will look into that for sure as I have skinny arms. Just didn't want to take the entire front off if it wasn't needed.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|