11-17-2017, 09:58 AM | #1 |
Drives: 2015 Camaro 1LE Join Date: Nov 2017
Location: Waterloo
Posts: 33
|
Winter Projects
Hi Everyone,
Been a while since ive been on here, wanted to see what everyone has been up to and has planned. Were upgrading the fuel system (among other things) on Aruns 15 1LE and aiming for 1000WHP and 9s in the spring. Im currently in limbo looking for a C6 Z06 for myself. Hope everyone is well and good. |
11-17-2017, 04:54 PM | #2 |
|
Traction.
I'm working on getting more traction.
__________________
|
11-17-2017, 06:39 PM | #3 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
BW ported tb and heads... e85/ lsa injectors... engine bay clean up. If the budget allows... gpi intake port and rod mod...I'm still on the fence with this one.
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
11-17-2017, 07:57 PM | #4 |
Drives: 2018 Hyper Blue 2SS convertible Join Date: Aug 2017
Location: S.E.Wisconsin
Posts: 182
|
This winter I had a new right knee installed and a rebuilt right ankle, no garage projects in my future for awhile while I recoup from the surgeries 3 weeks ago.
__________________
2018 HBM 2SS CONVERTIBLE A8 |
11-17-2017, 08:25 PM | #5 |
Hotwheels
|
Started all ready.. Since the first collection of parts sat around for a couple years till I found time. So this time around I'll actually get things done when it's not being driven anyway.
Started with the Meziere water pump Just have a idler bracket to finish up on the cnc, since the mounting points are 13 mm thicker than the stock water pump and edelbrock eforce udalized one side of the water pump to mount a idler. DSS driveshaft and axles zl1 wheel bearings / hubs Z28 front control arms and rear bushings on upper control zl1 springs. For a little better handling ( I hope) Linelock I may change blower pulley for a little more boost (air) She Still runs a little fat atm. Frankenstein heads GM interior light kit Foot wells and cup holders Gotta see that coffee cup @ night lol Sent from my SM-G930V using Tapatalk
__________________
|
11-18-2017, 01:45 PM | #6 |
Drives: 2011 LT Black Join Date: Nov 2011
Location: Calgary, Alberta, Canada
Posts: 406
|
Does saving up for a SS count?
|
11-19-2017, 01:07 PM | #7 |
|
5 gallon gas cans in the trunk work.
__________________
SPi Performance Stage 3 package Comp Cam
PHADT FE4 ZL Stg.3 VMAX CNC Spiral Ported Throttle Body Dynatech LT headers, Hi flow Cats MBRP 3" 304 stainless X-pipe exhaust Fastlane true CAI. Barton shifter |
11-19-2017, 04:23 PM | #8 |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
Keeping the driveway clear of snow.
__________________
|
11-21-2017, 08:15 AM | #9 |
DBLCHBY III
Drives: 15 1LE Join Date: Jun 2011
Location: Team Canada
Posts: 2,789
|
New rims for sure
__________________
|
11-22-2017, 01:51 PM | #10 |
Drives: 2015 Camaro 1LE Join Date: Nov 2017
Location: Waterloo
Posts: 33
|
|
11-27-2017, 05:28 PM | #11 |
|
__________________
|
11-27-2017, 05:30 PM | #12 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
11-27-2017, 06:40 PM | #13 |
|
__________________
Car mods: never enough!
|
11-27-2017, 07:59 PM | #14 |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
Spike III Build 2011 IBM 1SS/RS [COTW 6/25/12]
How about these one Tim?
__________________
|
|
|