Lingenfelter Performance Engineering Customers - Page 35 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Windy City · 10-01-2009, 11:04 PM

My shop is a few mile south, right down the street!
We know what fast is!

1320junkie · 10-01-2009, 11:10 PM

Quote:

Originally Posted by Windy City

My shop is a few mile south, right down the street!
We know what fast is!

Ok I frequent the Oak Park area

Windy City · 10-01-2009, 11:21 PM

Let me know when your gunna, I'll buy dinner!

1320junkie · 10-01-2009, 11:24 PM

Quote:

Originally Posted by Windy City

Let me know when your gunna, I'll buy dinner!

mws444 · 10-02-2009, 01:28 PM

Quote:

Originally Posted by Windy City

17 -18% Parasitic horsepower loss with the auto. That's the price you pay for not making driving a chore! Sitting in Chicago traffic mashing the clutch SUCKS! I've done it enough that if I ever do it again it will be too soon!

Trans has been done by RPM Transmissions, and Lingy changed the gear!
Remember these are dyno numbers, it don't mean how fast the car is.

If I was building a stricktly strip car I would have gone with a stick, but then I would have gone the route Junkie is too!
Right after I ripped all the guts out of the car and added a solid rear axle and roll cage!

No this car if for driving enjoyment and will be around a long time.

Dont for get about us when you get that ride home......we need pics and a report!!

bonecrshr · 10-02-2009, 06:33 PM

I didn't mean to start anything about whats faster or anything link that. I totally get that some people don't want to row through gears, I was just askin' about the dyno sheet...

mws444 · 10-02-2009, 08:57 PM

Quote:

Originally Posted by bonecrshr

I didn't mean to start anything about whats faster or anything link that. I totally get that some people don't want to row through gears, I was just askin' about the dyno sheet...

Dont worry about it, Windy is building his car like he wants it, as are the rest of us. Everyone here is proud to be part of this special brotherhood. But that being said there will aways be a little sibling rivalery.

Windy City · 10-02-2009, 11:28 PM

Quote:

Originally Posted by mws444

Dont worry about it, Windy is building his car like he wants it, as are the rest of us. Everyone here is proud to be part of this special brotherhood. But that being said there will aways be a little sibling rivalery.

Yea brother!!!!!!!!
Tomorrow is THE day! Car being dropped at my shop! HOORAY!!!

Speed74SS · 10-03-2009, 07:44 AM

I can't wait to see some pics and hear some good stuff today!!!

Windy City · 10-03-2009, 09:33 AM

Quote:

Originally Posted by Speed74SS

I can't wait to see some pics and hear some good stuff today!!!

Here is some eye candy I received early this AM from Lingy. Thanks to Kevin!

2010 BADSS · 10-03-2009, 10:12 AM

Windy
RS and I got to see the finishing touches put on your car yesterday. So NICE!!! Also got a ride from 570, boy does his car move. And the Borla exhaust had such a wonderful sound. The whole visit was so impressive that I signed the papers and ordered my 650 package!!! Little Lingy's should be on the way soon.

2010 BADSS · 10-03-2009, 10:16 AM

570 & Paul
Great meeting you and having lunch. Loved both your cars. Thanks for the ride 570, now I can't wait for mine to be transformed! Gotta get to the airport now, more info to come.

mws444 · 10-03-2009, 11:33 AM

Hey Windy, That car is sweeeeeeeeeet!!!!!

You have to post the results from that butt dyno!!

I would also love to hear how she hooks up. And pics and vids.

mws444 · 10-03-2009, 11:37 AM

Ok Boys, you must be traveling home but with such a large contingent of the brotherhood at LPE we should have some pics and stories posted by now.

I am dying here where are you guys?

10-01-2009, 11:04 PM	#477
Windy City Drives: Not enough room here! Join Date: Jul 2009 Location: Plainfield, IL Posts: 1,016	My shop is a few mile south, right down the street! We know what fast is! __________________ BEWARE OF THE LPE BROTHERHOOD! Remember: You can sleep in your car, but you can't drive your house!

10-01-2009, 11:21 PM	#479
Windy City Drives: Not enough room here! Join Date: Jul 2009 Location: Plainfield, IL Posts: 1,016	Let me know when your gunna, I'll buy dinner! __________________ BEWARE OF THE LPE BROTHERHOOD! Remember: You can sleep in your car, but you can't drive your house!

10-02-2009, 06:33 PM	#482
bonecrshr Drives: '69 and '10 Join Date: May 2009 Location: Miami, Florida Posts: 31	Hey I didn't mean to start anything about whats faster or anything link that. I totally get that some people don't want to row through gears, I was just askin' about the dyno sheet...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available	Tim@Lingenfelter	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-18-2010 08:11 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 08:09 PM
My Lingenfelter Camaro Build	Speed74SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	244	10-08-2009 11:00 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 03:26 PM
Three 2010 Camaros Arrive at Lingenfelter Performance Engineering	Sizzox	5th Gen Camaro SS LS LT General Discussions	25	04-26-2009 02:15 PM

10-03-2009, 07:44 AM	#485
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	I can't wait to see some pics and hear some good stuff today!!!

10-03-2009, 10:12 AM	#487
2010 BADSS Drives: 2010 2SS/RS IOM Join Date: Sep 2009 Location: New Mexico Posts: 1,210	Windy RS and I got to see the finishing touches put on your car yesterday. So NICE!!! Also got a ride from 570, boy does his car move. And the Borla exhaust had such a wonderful sound. The whole visit was so impressive that I signed the papers and ordered my 650 package!!! Little Lingy's should be on the way soon.

10-03-2009, 10:16 AM	#488
2010 BADSS Drives: 2010 2SS/RS IOM Join Date: Sep 2009 Location: New Mexico Posts: 1,210	570 & Paul Great meeting you and having lunch. Loved both your cars. Thanks for the ride 570, now I can't wait for mine to be transformed! Gotta get to the airport now, more info to come.

10-03-2009, 11:33 AM	#489
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Hey Windy, That car is sweeeeeeeeeet!!!!! You have to post the results from that butt dyno!! I would also love to hear how she hooks up. And pics and vids.

10-03-2009, 11:37 AM	#490
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Ok Boys, you must be traveling home but with such a large contingent of the brotherhood at LPE we should have some pics and stories posted by now. I am dying here where are you guys?