TAG's 2010 THRSS #2

[TAG UR IT]

Originally Posted by Doc

If you haven't checked out my build thread in awhile, check it out:

http://www.camaro5.com/forums/showthread.php?t=45165

There's bound to be some info (with pics and dyno charts) that you might find interesting; especially since you're going for a road course build.

Yep. It's been a while. I have a LOT of reading to do...hehe

I'll run and check it out.

[JusticePete]

Originally Posted by TAG UR IT

Pete, as compared to the 1.5" lowering springs I had in the rear before, is it now lower than before? Not sure...looks almost the same, but maybe a tad bit lower. But, I got under the car changing the settings and DANG are those exhaust pipes close to the ground! Now I know what you meant by scraping! (no....no scraping anything yet. )

Your rear is about 8mm lower than it was if I remember correctly.

On a lowered 5th Gen, headers, cats, exhaust and fascias are all self clearancing

[GTAHVIT]

Originally Posted by JusticePete

Your rear is about 8mm lower than it was if I remember correctly.

On a lowered 5th Gen, headers, cats, exhaust and fascias are all self clearancing

tell me about it...

[TAG UR IT]

Originally Posted by JusticePete

Your rear is about 8mm lower than it was if I remember correctly.

On a lowered 5th Gen, headers, cats, exhaust and fascias are all self clearancing

LMAO.....so that's where those sparks were coming from the other day!




I KID, I KID!!!


No sparks from under my car yet and actually, I hadn't scraped once so far. So, I'm good.

[PQ]

Originally Posted by JusticePete

On a lowered 5th Gen, headers, cats, exhaust and fascias are all self clearancing

Ya, I can attest to that.

[zebra]

Originally Posted by TAG UR IT

LMAO.....so that's where those sparks were coming from the other day!




I KID, I KID!!!


No sparks from under my car yet and actually, I hadn't scraped once so far. So, I'm good.

yeah, i found out a speed bump was a little too tall the hard way once
it hurt just to hear

[JusticePete]

Originally Posted by GTAHVIT

tell me about it...

Originally Posted by PQ

Ya, I can attest to that.

Originally Posted by zebra

yeah, i found out a speed bump was a little too tall the hard way once
it hurt just to hear

Two words guys -- LAUNCH MODE

[zebra]

Originally Posted by JusticePete

Two words guys -- LAUNCH MODE

early 2000 - just on or off
and how would that help with scraping?

[Mr. Wyndham]

Originally Posted by zebra

early 2000 - just on or off
and how would that help with scraping?

Rear the car backward by hammering it so you get more clearance up front...Duhhh....

[zebra]

oooooooooohhhhhhhhhhh
well my problem's the rocker panels anyway, so that would only make my problem worse slamming down right on them





u n l e s s .... i can hit it fast enough that the back tires are over the bump before the front touches back down!
theory-testing time

[Mr. Wyndham]

Originally Posted by zebra

oooooooooohhhhhhhhhhh
well my problem's the rocker panels anyway, so that would only make my problem worse slamming down right on them





u n l e s s .... i can hit it fast enough that the back tires are over the bump before the front touches back down!
theory-testing time

[JusticePete]

Originally Posted by zebra

oooooooooohhhhhhhhhhh
well my problem's the rocker panels anyway, so that would only make my problem worse slamming down right on them u n l e s s .... i can hit it fast enough that the back tires are over the bump before the front touches back down!
theory-testing time

EXACTLY

[Mr Twisty]

Originally Posted by zebra

early 2000 - just on or off
and how would that help with scraping?

You've never watched Knight Rider?

[zebra]

Originally Posted by MisterCamaro69

You've never watched Knight Rider?

oooohhhh... that launch mode
here i was taking y'all seriously for once & thinking about the traction control button