What Did You Do To Your Camaro Today? - Page 1483 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

StingrayblueSS · 03-06-2018, 02:37 AM

Quote:

Originally Posted by Gonzo SS

Thanks! I wanted to do something different from the factory stripes and I was also able to cover blemishes on both the front and rear bumper so that was a bonus. I always liked IBM with CGM stripes, but you hardly ever see that combo. This is an Avery metallic grey, but it's close.

I really like that color combo is that paint or vinyl?

SS PANTHER · 03-06-2018, 08:58 AM

Quote:

Originally Posted by StingrayblueSS

I really like that color combo is that paint or vinyl?

Yes, I would like to know also. Not usually a fan of the stripes going all the way down the front fascia, but, because of the color combo and more importantly the width of the stripe it looks really good. The heritage grille makes it all come together. Would like to see a couple 3/4 shots, if possible.

swampcritter · 03-06-2018, 01:09 PM

Quote:

Originally Posted by Welker2

Where did you purchase your battery?! Paid $110 at AutoZone when I replaced mine about 6 months ago.

I bought it at Advance Auto.They were the only ones that had it.I did check around and all were about the same in price.At least I don't have to delete codes every time I start it, that was a pain in the butt.I did get good at it , I could slide the seat back and plug that sucker up with out even seeing the connection!

Gonzo SS · 03-06-2018, 10:37 PM

Quote:

Originally Posted by StingrayblueSS

I really like that color combo is that paint or vinyl?

Quote:

Originally Posted by SS PANTHER

Yes, I would like to know also. Not usually a fan of the stripes going all the way down the front fascia, but, because of the color combo and more importantly the width of the stripe it looks really good. The heritage grille makes it all come together. Would like to see a couple 3/4 shots, if possible.

It's vinyl. Here are a couple more pics. Not the best, but all I have right now.

SS PANTHER · 03-06-2018, 11:29 PM

Quote:

Originally Posted by Gonzo SS

It's vinyl. Here are a couple more pics. Not the best, but all I have right now.

Nice. I like it. I think vinyl is a good way to go just in case your not happy down the road with the stripes. Painting that much stripe on the car would be expensive. My brother lives in Suwanee by the way. But, he is a 911 Carrera S guy.

orange devil · 03-06-2018, 11:36 PM

Quote:

Originally Posted by Gonzo SS

It's vinyl. Here are a couple more pics. Not the best, but all I have right now.

Really like it !!!

deano1989 · 03-07-2018, 11:33 AM

Finally got a tune done! With a CAI, axle back exhausts, LT headers, and high flow cats the car gained 47 rwhp and 34 rwtq from the tune. The Camaro now runs at 378.97 rwhp and 397.50 rwtq. Thanks to Mike Norris Motorsports!

2014yellowRS · 03-08-2018, 12:05 PM

Finished up the stuff I had for my girlfriend’s car last night. Added the footwell lights and the 4 pack gauges over the weekend then did the CFD shifter adapter last night. Pretty happy with how it all turned out.

Hilflos · 03-08-2018, 12:26 PM

Dropped it off to have ARH headers, cats, x pipe, and a dyno tune done.

Already have Z/28 CAI and ported throttle body on it, did the diff (3.91's and truetrac) a while ago, and a host of suspension mods.

Going to be interesting to see the dyno sheet, and experience the difference.

PeteD · 03-08-2018, 10:24 PM

Quote:

Originally Posted by 2014yellowRS

Finished up the stuff I had for my girlfriend’s car last night. Added the footwell lights and the 4 pack gauges over the weekend then did the CFD shifter adapter last night. Pretty happy with how it all turned out.

I like the lighting. You can actually see with it

PeteD · 03-08-2018, 10:25 PM

Just a little bowtie delete action today

TintcoatTrooper · 03-09-2018, 12:05 AM

Changed the Differential Fluid With Royal Purple Max Gear 75w90.. the car had a lot of metal shavings so looks like a new 3.91 is commin soon but now the car shifts better and no more diff squeal! Now just need to replace the Slave cylinder with the billet support

Bretts · 03-09-2018, 02:04 PM

Quote:

Originally Posted by Gonzo SS

Thanks! I wanted to do something different from the factory stripes and I was also able to cover blemishes on both the front and rear bumper so that was a bonus. I always liked IBM with CGM stripes, but you hardly ever see that combo. This is an Avery metallic grey, but it's close.

I like the stripe color also have be thinking of a similar full stripe in that or a metallic finish

I installed the JPss castor locks radius arm inserts and 32mm solid rear black magic swaybar these days off

Spec · 03-09-2018, 02:43 PM

Gorgeous drive to Santa Barbara yesterday from the IE. Just so much fun... exhaust roaring, people around me showing some love... people in the fast lane getting out of my way while just cruising 75-80, no traffic early afternoon through LA... just awesome.

Ordered a ZL1 Wicker Bill for my ride... finally, after lagging on pulling the trigger. It arrives Monday... very quick for Standard shipping from ZL1Addons.com.

Will be installing the side wheel air deflectors, some more underhood bling, and will be doing a good deep clean and detail this weekend.

Eventually will be trying to finish cutting up that diffuser lol...

03-07-2018, 11:33 AM	#20755
deano1989 Drives: 2010 Camaro SS/RS Join Date: Feb 2017 Location: Indianapolis Posts: 100 View My Garage	Finally got a tune done! With a CAI, axle back exhausts, LT headers, and high flow cats the car gained 47 rwhp and 34 rwtq from the tune. The Camaro now runs at 378.97 rwhp and 397.50 rwtq. Thanks to Mike Norris Motorsports! Attached Images

03-08-2018, 12:05 PM	#20756
2014yellowRS Drives: 2014 RS Join Date: Feb 2018 Location: Oklahoma Posts: 6	Finished up the stuff I had for my girlfriend’s car last night. Added the footwell lights and the 4 pack gauges over the weekend then did the CFD shifter adapter last night. Pretty happy with how it all turned out. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM

03-08-2018, 12:26 PM	#20757
Hilflos Drives: 2015 1SS / RS NPP Join Date: Apr 2015 Location: Dayton Ohio Posts: 353	Dropped it off to have ARH headers, cats, x pipe, and a dyno tune done. Already have Z/28 CAI and ported throttle body on it, did the diff (3.91's and truetrac) a while ago, and a host of suspension mods. Going to be interesting to see the dyno sheet, and experience the difference.

03-09-2018, 12:05 AM	#20760
TintcoatTrooper Drives: '10 RJT 2ss RIP '13 CRT 1ss 1LE Join Date: Aug 2016 Location: Southeast Texas Posts: 152	Changed the Differential Fluid With Royal Purple Max Gear 75w90.. the car had a lot of metal shavings so looks like a new 3.91 is commin soon but now the car shifts better and no more diff squeal! Now just need to replace the Slave cylinder with the billet support

03-09-2018, 02:43 PM	#20762
Spec Account Suspended Drives: 2010 Camaro 1SS LS3 Join Date: Jan 2015 Location: Riverside, CA Posts: 4,018	Gorgeous drive to Santa Barbara yesterday from the IE. Just so much fun... exhaust roaring, people around me showing some love... people in the fast lane getting out of my way while just cruising 75-80, no traffic early afternoon through LA... just awesome. Ordered a ZL1 Wicker Bill for my ride... finally, after lagging on pulling the trigger. It arrives Monday... very quick for Standard shipping from ZL1Addons.com. Will be installing the side wheel air deflectors, some more underhood bling, and will be doing a good deep clean and detail this weekend. Eventually will be trying to finish cutting up that diffuser lol...