Kenne Bell 2010 camaro kits 2.8, 3.6, 4.2 available - Page 16 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

huggerorangss · 01-20-2010, 10:43 PM

All the drama =(..I just want the kits to come out so I can buy one!!

JM10 · 01-20-2010, 10:57 PM

Quote:

Originally Posted by huggerorangss

All the drama =(..I just want the kits to come out so I can buy one!!

final numbers, pricing...

DCv2 · 01-20-2010, 11:35 PM

Quote:

Originally Posted by JM10

final numbers, pricing...

*Milk 1027* · 01-20-2010, 11:36 PM

Both vendors cut it off now. Or you will be quickly shown the door out. Vendor bickoring and fighting is not allowed. Don't bring our forum down to your level.

camaro692 · 01-21-2010, 12:05 AM

Its interesting to read, but im afraid both of you might turn potential customers to the TVS2300 kits. Lets just see some numbers from both of you. And reliable horsepower too!

Z_Rocks · 01-21-2010, 12:12 AM

Quote:

Originally Posted by camaro692

Its interesting to read, but im afraid both of you might turn potential customers to the TVS2300 kits.

I was gonna say, Brian is now laughing all the way to the bank!

ironpeddler · 01-21-2010, 12:49 AM

They did this on the teamshelby forums lol. Back and forth for multiple pages. It was great. I respect the passion that they both have for their products. Without the slightest doubt in their mind they believe that their product is better than the others, hands down.

nfamous209 · 01-21-2010, 08:57 AM

damn i knew i should have checked this forum before i went to bed, i was waiting for Dustin's response. wheres my popcorn.

*radz28* · 01-21-2010, 11:28 AM

Quote:

Originally Posted by ironpeddler

They did this on the teamshelby forums lol. Back and forth for multiple pages. It was great. I respect the passion that they both have for their products. Without the slightest doubt in their mind they believe that their product is better than the others, hands down.

I can respect this too. However, there is a line that can be crossed from what is intended to be passion, and what others interperate as bickering. Were it not interesting to learn some of the little details of these SCs, this thread may have been shut down a while ago. I hope the attitude turns more toward education than the defensive/offensive tones in some of the prior posts. I, for one, consider the way a business conducts themselves in addition to the product and service that they provide. I'll drive out of my way to go to a restaurant and pay too much for great service and a great attitude. I sincerely hope that the tone changes...

Z_Rocks · 01-21-2010, 11:54 AM

Quote:

Originally Posted by radz282003

I can respect this too. However, there is a line that can be crossed from what is intended to be passion, and what others interperate as bickering. Were it not interesting to learn some of the little details of these SCs, this thread may have been shut down a while ago. I hope the attitude turns more toward education than the defensive/offensive tones in some of the prior posts. I, for one, consider the way a business conducts themselves in addition to the product and service that they provide. I'll drive out of my way to go to a restaurant and pay too much for great service and a great attitude. I sincerely hope that the tone changes...

Well said Radz!!!

thekid96 · 01-21-2010, 12:33 PM

Quote:

Originally Posted by Total_Perf_Eng

Sorry, its 02BlueSS. His name is Paul.

Flash, Bought another car, and pulled it, but he drove the hell out of it while it was on. His car had 100 thousand miles, and had been ridden HARD.. Completely stock 100K mile C6, with an A6 (that he burned up twice)

Torco is not a Non Pump Gas tune. It is an octane booster additive. most of the guys in that area run it as a precaution. But you dont ever tune FOR torco. If you dont want to run torco, just dont add it. The tune is the same (unless the tuner adds more timing, thus FORCING the customer to run it)

Although he doesnt currently have the kit on his car, he is still a great place for info. He beat the heck out of his car. He would be able to answer any questions you may have. Its just too bad he couldnt keep the tranny alive long enough to turn it up.

If memory serves, the original tune from TPE was on 100 octane, not even a Torco tune. Flash then took the car to CMS to have it retuned in Cali, which is where they figured it was tuned for 100, pulling all the timing, ait through the roof, etc. Sound familiar?

Bbrock25 · 01-21-2010, 12:42 PM

Quote:

Originally Posted by radz282003

I can respect this too. However, there is a line that can be crossed from what is intended to be passion, and what others interperate as bickering. Were it not interesting to learn some of the little details of these SCs, this thread may have been shut down a while ago. I hope the attitude turns more toward education than the defensive/offensive tones in some of the prior posts. I, for one, consider the way a business conducts themselves in addition to the product and service that they provide. I'll drive out of my way to go to a restaurant and pay too much for great service and a great attitude. I sincerely hope that the tone changes...

I agree 100%. I'm the same way; service, attitude, and just overall how they conduct themselves is a deal maker/breaker for me.

*GTAHVIT* · 01-21-2010, 12:46 PM

I may be dumb for posting this.

But I will pay a little more money to work with someone I can trust and who is willing to help me directly and not just put me in a que and get to me when they get to me...

I know businesses have to move product to make money but it says a lot when they take time to discuss ideas with you and so on... I'll be more willing to give them my money even if there is a better deal out there. Peace of mind is worth some $$ in my opinion.

*radz28* · 01-21-2010, 01:02 PM

Quote:

Originally Posted by GTAHVIT

I may be dumb for posting this.

But I will pay a little more money to work with someone I can trust and who is willing to help me directly and not just put me in a que and get to me when they get to me...

I know businesses have to move product to make money but it says a lot when they take time to discuss ideas with you and so on... I'll be more willing to give them my money even if there is a better deal out there. Peace of mind is worth some $$ in my opinion.

01-20-2010, 11:36 PM	#214
Milk 1027 Camaro➎ moderator Drives: '13 BLK 1LE Join Date: Aug 2008 Location: AZ Posts: 13,567 View My Garage	Both vendors cut it off now. Or you will be quickly shown the door out. Vendor bickoring and fighting is not allowed. Don't bring our forum down to your level. __________________

01-21-2010, 12:05 AM	#215
camaro692 Drives: 2010 Camaro SS, G8 GT, HD FLHRX Join Date: Sep 2009 Location: Greeley, CO Posts: 309	Its interesting to read, but im afraid both of you might turn potential customers to the TVS2300 kits. Lets just see some numbers from both of you. And reliable horsepower too! __________________ [SIGPIC][/SIGP

01-21-2010, 12:49 AM	#217
ironpeddler Drives: 2010 Shelby GT500 Join Date: May 2009 Location: OH Posts: 288	They did this on the teamshelby forums lol. Back and forth for multiple pages. It was great. I respect the passion that they both have for their products. Without the slightest doubt in their mind they believe that their product is better than the others, hands down. __________________ Black/silver stripes 2010 GT500 http://www.youtube.com/watch?v=akc1A-Jus_k ^^^ mustang dyno video

01-21-2010, 12:46 PM	#223
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,441 View My Garage	I may be dumb for posting this. But I will pay a little more money to work with someone I can trust and who is willing to help me directly and not just put me in a que and get to me when they get to me... I know businesses have to move product to make money but it says a lot when they take time to discuss ideas with you and so on... I'll be more willing to give them my money even if there is a better deal out there. Peace of mind is worth some $$ in my opinion. __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 07:10 PM
SEMA Camaro: Yellow Camaro Concept	Tran	Camaro Photos \| Spyshots \| Video \| Media Gallery	45	09-01-2011 03:19 PM
An interesting Camaro (and GM) story! I just bought my 2010 Camaro!	Camarodriver	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	12	11-28-2010 04:52 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 08:05 PM

01-20-2010, 10:43 PM	#211
huggerorangss Drives: c6 corvette Join Date: Oct 2009 Location: clinton township Posts: 174	All the drama =(..I just want the kits to come out so I can buy one!!

01-21-2010, 08:57 AM	#218
nfamous209 Drives: 2002 Camaro z28 Join Date: May 2008 Location: patterson, ca Posts: 413	damn i knew i should have checked this forum before i went to bed, i was waiting for Dustin's response. wheres my popcorn.