CAI w/ ADM Race Scoop - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

GEEo · 10-19-2010, 03:23 PM

Post some install pics!

BowlingSS · 10-20-2010, 02:05 PM

Quote:

Originally Posted by Robbie1227

No, I was hoping to see pics of the plastic replacement washer bottle installed from RCfiddy. It looks much better than the bag!
http://www.clubrsx.com/cr/VIB-10400....mpaign=froogle

This is going to be my first mod as soon as I get my car.
I was wondering if you need the pump? Could I just use a bag like this:
http://www.yearone.com/serverfiles/f...=11&goBtn.y=12

Thanks.
Bill

Jose · 10-20-2010, 02:08 PM

Quote:

Originally Posted by Robbie1227

No, I was hoping to see pics of the plastic replacement washer bottle installed from RCfiddy. It looks much better than the bag!
http://www.clubrsx.com/cr/VIB-10400....mpaign=froogle

Just installed my CAI Intake, just ordered the same bottle, waiting for it to arrive. It looks much better than the bag.

1969to2010 · 11-04-2010, 06:50 PM

would you see some gains from just removing or relocating the washer bottle? I would think you would

|BLACKSS| · 11-04-2010, 07:54 PM

I have CAI Inc intake and want to install a ADM race scoop. Can I just get rid of the washer bottle all together(delete it). I dont daily drive my car.... only in good weather and I wipe it down before I take it out.

Supercharged SS · 11-04-2010, 08:12 PM

Quote:

Originally Posted by |BLACKSS|

I have CAI Inc intake and want to install a ADM race scoop. Can I just get rid of the washer bottle all together(delete it). I dont daily drive my car.... only in good weather and I wipe it down before I take it out.

Yup!!! Thats the easiest thing to do. I did the same thing, totally removed it, since I rarely drive the car.

1969to2010 · 11-07-2010, 12:46 AM

just removed the bag today did a thread on it else where felt a nice little bump

http://www.camaro5.com/forums/showth...89#post2523189

SRT10KLLR · 11-07-2010, 12:58 AM

Don't really need windshield washer fluid any ways. If its raining the water and wipers will clean the windshield. Plus I love using Rain-X on all the cars and don't even use the freakin wipers.

1969to2010 · 11-07-2010, 01:14 AM

http://www.verociousmotorsports.com/VIBWWBK-1-2

found it here a bit cheaper

103FrazzL · 11-08-2010, 12:09 AM

http://www.camaro5.com/forums/showth...t=51153&page=2

Maybe this will help

Jekyll-N-Hyde · 11-08-2010, 12:42 AM

I dont know if any of you have looked into it however a windsheild washer bottle/bracket from a 69 Camaro will mount on the drivers side of the 2010 perfectly.
All you have to do is remove the squirter/motor from the original bottle then mount it down below the car some how in the area where it was located at the factory and run a hose from the end that normally goes into the Factory bottle up to either the bottle you use or even a Washer fluid bag.

I recently did this to a friends car and used a 69 washer bottle and bracket.
After we finished his I thought about it by using a 69 RS bracket it would probably mount on the side of you CAI very easily and look clean as well.

just as ADM told me use some Vaccum hose ( same thing the factory uses ) going up to the bottle from down below.

AG454 · 11-08-2010, 10:11 AM

Quote:

Originally Posted by Jekyll-N-Hyde

I dont know if any of you have looked into it however a windsheild washer bottle/bracket from a 69 Camaro will mount on the drivers side of the 2010 perfectly.
All you have to do is remove the squirter/motor from the original bottle then mount it down below the car some how in the area where it was located at the factory and run a hose from the end that normally goes into the Factory bottle up to either the bottle you use or even a Washer fluid bag.

I recently did this to a friends car and used a 69 washer bottle and bracket.
After we finished his I thought about it by using a 69 RS bracket it would probably mount on the side of you CAI very easily and look clean as well.

just as ADM told me use some Vaccum hose ( same thing the factory uses ) going up to the bottle from down below.

Where did you mount the '69 bracket and bottle? I have the CAI intake and ADM race scoop installed and I can't find room to install a '69 washer bottle setup. I really dont want to drill holes in the CAI intake. Thanks.

caverman · 11-08-2010, 05:03 PM

Quote:

Originally Posted by Jekyll-N-Hyde

I dont know if any of you have looked into it however a windsheild washer bottle/bracket from a 69 Camaro will mount on the drivers side of the 2010 perfectly.
All you have to do is remove the squirter/motor from the original bottle then mount it down below the car some how in the area where it was located at the factory and run a hose from the end that normally goes into the Factory bottle up to either the bottle you use or even a Washer fluid bag.

I recently did this to a friends car and used a 69 washer bottle and bracket.
After we finished his I thought about it by using a 69 RS bracket it would probably mount on the side of you CAI very easily and look clean as well.

just as ADM told me use some Vaccum hose ( same thing the factory uses ) going up to the bottle from down below.

OK....you need to post some pics if you can. I might install the scoop some day but one of the biggest reasons I didn't go with the ADM race is that I didn't want to lose the washer bottle.

1969to2010 · 11-14-2010, 11:46 PM

Quote:

Originally Posted by caverman

OK....you need to post some pics if you can. I might install the scoop some day but one of the biggest reasons I didn't go with the ADM race is that I didn't want to lose the washer bottle.

this worked for me
http://www.camaro5.com/forums/showth...52#post2546952

11-04-2010, 06:50 PM	#18
1969to2010 The Man in Black Drives: 1969 Camaro 2010 Camaro 1SS Join Date: Apr 2009 Location: Long Island NY Posts: 2,016	would you see some gains from just removing or relocating the washer bottle? I would think you would __________________

11-04-2010, 07:54 PM	#19
\|BLACKSS\| Drives: BLACK 1SS Join Date: Apr 2010 Location: SOUTHERN ILLINOIS Posts: 269	I have CAI Inc intake and want to install a ADM race scoop. Can I just get rid of the washer bottle all together(delete it). I dont daily drive my car.... only in good weather and I wipe it down before I take it out. __________________ COLD AIR INDUCTIONS CAI JBA HIGH FLOW CATS EDELBROCK X-PIPE MUFFLER DELETE

11-07-2010, 12:46 AM	#21
1969to2010 The Man in Black Drives: 1969 Camaro 2010 Camaro 1SS Join Date: Apr 2009 Location: Long Island NY Posts: 2,016	just removed the bag today did a thread on it else where felt a nice little bump http://www.camaro5.com/forums/showth...89#post2523189 __________________

11-07-2010, 12:58 AM	#22
SRT10KLLR Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009 Location: Down South Posts: 1,497	Don't really need windshield washer fluid any ways. If its raining the water and wipers will clean the windshield. Plus I love using Rain-X on all the cars and don't even use the freakin wipers. __________________ 2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo 2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo

11-07-2010, 01:14 AM	#23
1969to2010 The Man in Black Drives: 1969 Camaro 2010 Camaro 1SS Join Date: Apr 2009 Location: Long Island NY Posts: 2,016	http://www.verociousmotorsports.com/VIBWWBK-1-2 found it here a bit cheaper __________________

10-19-2010, 03:23 PM	#15
GEEo OKCamaros Drives: 4 banger Diesel Join Date: Mar 2010 Location: Philippines Posts: 4,572	Post some install pics!

11-08-2010, 12:09 AM	#24
103FrazzL Drives: 2010 Camaro 2SS RS M6 Join Date: Aug 2009 Location: North East NJ Posts: 136 View My Garage	http://www.camaro5.com/forums/showth...t=51153&page=2 Maybe this will help __________________ 2010 Camaro 2 SS RS CGM ADM Street Cold air intake, SLP Loud Mouth II, ARH 1 7/8 Long Tube Headers w/high flow cats, Hurst Short Throw shifter, Skip shift eliminator, LED licence plate Lights

11-08-2010, 12:42 AM	#25
Jekyll-N-Hyde I put the FU back in FUN Drives: 1969 SS 396 , 2010 Camaro SS Join Date: Jun 2009 Location: Between Weatherford and Azle TX hway730 Posts: 2,129	I dont know if any of you have looked into it however a windsheild washer bottle/bracket from a 69 Camaro will mount on the drivers side of the 2010 perfectly. All you have to do is remove the squirter/motor from the original bottle then mount it down below the car some how in the area where it was located at the factory and run a hose from the end that normally goes into the Factory bottle up to either the bottle you use or even a Washer fluid bag. I recently did this to a friends car and used a 69 washer bottle and bracket. After we finished his I thought about it by using a 69 RS bracket it would probably mount on the side of you CAI very easily and look clean as well. just as ADM told me use some Vaccum hose ( same thing the factory uses ) going up to the bottle from down below.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unofficial 1/4 Mile (V8) 2010+ Camaro Fast List	Merc	Dragstrip and Launch Techniques Discussion	250	04-01-2014 11:40 AM
ADM Intake Scoop Data at the track	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	31	01-23-2012 12:05 AM
CAI: ADM street vs Roto Fab	gm2376	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	10	04-30-2011 09:23 PM
ARH 2" Headers + ADM Race Intake + ADM Tune	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	64	10-30-2010 08:49 PM
Washer fluid bag for ADM race scoop??	Robbie1227	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	2	10-11-2010 06:25 PM