Selling my new 300m gforce axles - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

orange-prince · 02-03-2011, 12:20 PM

whats the advantge on geting the 9'' setup ?

advfire · 02-09-2011, 06:39 AM

advantage is you don't have to tow your car home after you snap them

advfire · 02-10-2011, 07:31 PM

bump

mikepage0007 · 02-11-2011, 12:24 AM

well , i,m not really looking, but if you decide to let go for 1300.00 i have cash and we could meet in the palm beach area on a weekend..so no shipping and cash in your hand , no paypal fees..just throwing it out there..

Smart Line · 02-11-2011, 09:47 AM

bet ya he takes that as a bid and then ask's for more...

mikepage0007 · 02-11-2011, 08:50 PM

Quote:

Originally Posted by Smart Line

bet ya he takes that as a bid and then ask's for more...

hey, it don,t hurt to throw it out there, i,m only running 650 rwhp and not plan on going any higher..have 2 sets of stock axles if i break one..haven,t broke one yet..and if he gets tired of trying to sell, my offer is there unless someone else goes 9inch and has some gforce or dss axles.

advfire · 02-13-2011, 03:26 PM

knock knock

ddavis · 02-13-2011, 04:56 PM

Ok, ill bite.......... Whos there?

advfire · 02-15-2011, 09:38 PM

bump

advfire · 02-17-2011, 10:03 PM

bump

advfire · 02-21-2011, 08:54 AM

Come on people, why wait until they break.

jsharp · 02-21-2011, 09:41 PM

Although they are a great setup they are rated more than needed for most people for that price. Once again well worth it and good deal but not as many have broken as you may think for us in the 500-650 range. We need a value setup that is rated to like 700 but its the labor that makes the axles expensive. Bump for a great offer!

hot ss · 02-21-2011, 09:47 PM

free bump, but if you dont wheelhop, the stockers seem fine.
GL with sale. Personally i pay 50% of new cost for used.
And i am in the market for a set.

advfire · 02-22-2011, 08:13 PM

Hard to call them used seeing that I only had then in for less then one day, but I guess that is still considered used, more like tested and broken in. I did speak to chris at gforce and the warrenty for the units are covered to whom ever buys them

02-09-2011, 06:39 AM	#16
advfire Drives: 2010 SS Black Join Date: Jul 2009 Location: Parkland, Florida Posts: 171	advantage is you don't have to tow your car home after you snap them __________________ 2SS- M6 - 849 RWHP, 757 RWTQ - YSI -Supercharger - Comp Cams Stage 3 Blower Cam -54-471-11 - (In-239/624 - Ex 255/624) MTI - CAI - Meth Injection Systems using 50/50 mix - Kooks 1 7/8" Headers with 3" catted X-Pipe - Kooks muflers to tips - LSR Short Throw Shifter - NGK TR6 Spark Plugs - 160 degree thermostat - LSR Sway Bars (Front & Rear) - BMR Subframe Connectors bolt-on - DSS - lingenfelter 9" w/ 4.10P - PFADT coilover front/back - BMR Spherical Toe rods / Trailing arms - Posi lock - Last edited by advfire; 02-10-2011 at 05:49 AM.

02-10-2011, 07:31 PM	#17
advfire Drives: 2010 SS Black Join Date: Jul 2009 Location: Parkland, Florida Posts: 171	bump __________________ 2SS- M6 - 849 RWHP, 757 RWTQ - YSI -Supercharger - Comp Cams Stage 3 Blower Cam -54-471-11 - (In-239/624 - Ex 255/624) MTI - CAI - Meth Injection Systems using 50/50 mix - Kooks 1 7/8" Headers with 3" catted X-Pipe - Kooks muflers to tips - LSR Short Throw Shifter - NGK TR6 Spark Plugs - 160 degree thermostat - LSR Sway Bars (Front & Rear) - BMR Subframe Connectors bolt-on - DSS - lingenfelter 9" w/ 4.10P - PFADT coilover front/back - BMR Spherical Toe rods / Trailing arms - Posi lock -

02-11-2011, 12:24 AM	#18
mikepage0007 Drives: 2010 camaro Join Date: Aug 2009 Location: port st lucie ,florida Posts: 4,273	well , i,m not really looking, but if you decide to let go for 1300.00 i have cash and we could meet in the palm beach area on a weekend..so no shipping and cash in your hand , no paypal fees..just throwing it out there.. __________________

02-13-2011, 03:26 PM	#21
advfire Drives: 2010 SS Black Join Date: Jul 2009 Location: Parkland, Florida Posts: 171	knock knock __________________ 2SS- M6 - 849 RWHP, 757 RWTQ - YSI -Supercharger - Comp Cams Stage 3 Blower Cam -54-471-11 - (In-239/624 - Ex 255/624) MTI - CAI - Meth Injection Systems using 50/50 mix - Kooks 1 7/8" Headers with 3" catted X-Pipe - Kooks muflers to tips - LSR Short Throw Shifter - NGK TR6 Spark Plugs - 160 degree thermostat - LSR Sway Bars (Front & Rear) - BMR Subframe Connectors bolt-on - DSS - lingenfelter 9" w/ 4.10P - PFADT coilover front/back - BMR Spherical Toe rods / Trailing arms - Posi lock -

02-13-2011, 04:56 PM	#22
ddavis boostalicious Drives: Blown Ls3 Join Date: May 2010 Location: Bay Area SF Posts: 1,030 View My Garage	Ok, ill bite.......... Whos there? __________________ Powered by Maggie553rwhp 541rwtq

02-03-2011, 12:20 PM	#15
orange-prince QATAR 2022 Drives: black cts-V coupe a6 Join Date: Apr 2010 Location: doha-qatar ( middle east ) Posts: 983	whats the advantge on geting the 9'' setup ?

02-11-2011, 09:47 AM	#19
Smart Line Drives: 2011 Blue1SSRS 623RWHP, 02 vette Join Date: Aug 2010 Location: Richmond VA Posts: 1,308	bet ya he takes that as a bid and then ask's for more...

02-15-2011, 09:38 PM	#23
advfire Drives: 2010 SS Black Join Date: Jul 2009 Location: Parkland, Florida Posts: 171	bump __________________ 2SS- M6 - 849 RWHP, 757 RWTQ - YSI -Supercharger - Comp Cams Stage 3 Blower Cam -54-471-11 - (In-239/624 - Ex 255/624) MTI - CAI - Meth Injection Systems using 50/50 mix - Kooks 1 7/8" Headers with 3" catted X-Pipe - Kooks muflers to tips - LSR Short Throw Shifter - NGK TR6 Spark Plugs - 160 degree thermostat - LSR Sway Bars (Front & Rear) - BMR Subframe Connectors bolt-on - DSS - lingenfelter 9" w/ 4.10P - PFADT coilover front/back - BMR Spherical Toe rods / Trailing arms - Posi lock -

02-17-2011, 10:03 PM	#24
advfire Drives: 2010 SS Black Join Date: Jul 2009 Location: Parkland, Florida Posts: 171	bump __________________ 2SS- M6 - 849 RWHP, 757 RWTQ - YSI -Supercharger - Comp Cams Stage 3 Blower Cam -54-471-11 - (In-239/624 - Ex 255/624) MTI - CAI - Meth Injection Systems using 50/50 mix - Kooks 1 7/8" Headers with 3" catted X-Pipe - Kooks muflers to tips - LSR Short Throw Shifter - NGK TR6 Spark Plugs - 160 degree thermostat - LSR Sway Bars (Front & Rear) - BMR Subframe Connectors bolt-on - DSS - lingenfelter 9" w/ 4.10P - PFADT coilover front/back - BMR Spherical Toe rods / Trailing arms - Posi lock -

02-21-2011, 08:54 AM	#25
advfire Drives: 2010 SS Black Join Date: Jul 2009 Location: Parkland, Florida Posts: 171	Come on people, why wait until they break. __________________ 2SS- M6 - 849 RWHP, 757 RWTQ - YSI -Supercharger - Comp Cams Stage 3 Blower Cam -54-471-11 - (In-239/624 - Ex 255/624) MTI - CAI - Meth Injection Systems using 50/50 mix - Kooks 1 7/8" Headers with 3" catted X-Pipe - Kooks muflers to tips - LSR Short Throw Shifter - NGK TR6 Spark Plugs - 160 degree thermostat - LSR Sway Bars (Front & Rear) - BMR Subframe Connectors bolt-on - DSS - lingenfelter 9" w/ 4.10P - PFADT coilover front/back - BMR Spherical Toe rods / Trailing arms - Posi lock -

02-21-2011, 09:41 PM	#26
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Although they are a great setup they are rated more than needed for most people for that price. Once again well worth it and good deal but not as many have broken as you may think for us in the 500-650 range. We need a value setup that is rated to like 700 but its the labor that makes the axles expensive. Bump for a great offer! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

02-21-2011, 09:47 PM	#27
hot ss Drives: aqua 2ss l99 Join Date: Jun 2009 Location: Edmonton Posts: 1,215	free bump, but if you dont wheelhop, the stockers seem fine. GL with sale. Personally i pay 50% of new cost for used. And i am in the market for a set. __________________ May your exhaust note, sing in harmony with your blower.

02-22-2011, 08:13 PM	#28
advfire Drives: 2010 SS Black Join Date: Jul 2009 Location: Parkland, Florida Posts: 171	Hard to call them used seeing that I only had then in for less then one day, but I guess that is still considered used, more like tested and broken in. I did speak to chris at gforce and the warrenty for the units are covered to whom ever buys them __________________ 2SS- M6 - 849 RWHP, 757 RWTQ - YSI -Supercharger - Comp Cams Stage 3 Blower Cam -54-471-11 - (In-239/624 - Ex 255/624) MTI - CAI - Meth Injection Systems using 50/50 mix - Kooks 1 7/8" Headers with 3" catted X-Pipe - Kooks muflers to tips - LSR Short Throw Shifter - NGK TR6 Spark Plugs - 160 degree thermostat - LSR Sway Bars (Front & Rear) - BMR Subframe Connectors bolt-on - DSS - lingenfelter 9" w/ 4.10P - PFADT coilover front/back - BMR Spherical Toe rods / Trailing arms - Posi lock -

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best Deal on DSS Camaro 2010 - 2011 Axles	Paschal Performance	Transmission / Driveline	8	09-19-2010 12:23 AM
Hot Deal For DSS 2010 Camaro Axles	Paschal Performance	Transmission / Driveline	3	03-04-2010 09:36 PM
Axles snapping	RickyTheStorm	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	27	02-28-2010 10:37 PM
Crazy for thinking of selling my '68 and getting a 2010	ls6camaro	5th Gen Camaro SS LS LT General Discussions	54	11-06-2008 04:56 PM