Wednesday Night Drags - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Briand069 · 05-02-2011, 07:40 PM

I should be there this Wednesday if all goes well at work.

Brian

pyr0b0y · 05-02-2011, 07:43 PM

i might be able to make this wednesday, what time r u planning on being up there.

Jason7 · 05-02-2011, 07:53 PM

In reality 5

Jason

DarkObsession · 05-02-2011, 10:22 PM

I'm going to try and make it out on June 1st. I should be able to take a half day from work and be there right when they start at 4. Anybody up for the 1st? I know it's a ways away but work is crazy this month and maybe with some more notice, more people could make it

Extreme454 · 05-02-2011, 10:51 PM

Another month or so and it gets so hot out at Infineon. So, if you wanna try it out, the sooner the better.

DarkObsession · 05-02-2011, 11:01 PM

Then I guess I'm going alone

I really can't make out before then. I could go on the 11th but that is Motorcycle only night.

pyr0b0y · 05-03-2011, 12:29 AM

what about may 25th? didnt u post that originally? anyways, im planning on heading up there this wednesday, but probably wont get there till 6 or 630 because of traffic.

Jason7 · 05-03-2011, 01:41 AM

I am down for whatever. I'm going to try to get there early as possible because ill have the posse with me, (wife and 5 week old daughter)

Jason

Silver2SSRS6spd · 05-03-2011, 01:53 AM

I'm down for it as soon as I get my car put back together and install the lineloc system I purchased a while back. I have a rain check with them after we were rained out during their test and tune event a couple months ago.

What do you guys think your cars will run? My best so far is 12.66 at around 110mph. I'm trying to get under the 12.5 mark and should be able to achieve that by heating the drag radials with the line lock.

pyr0b0y · 05-03-2011, 02:16 AM

Quote:

Originally Posted by Silver2SSRS6spd

I'm down for it as soon as I get my car put back together and install the lineloc system I purchased a while back. I have a rain check with them after we were rained out during their test and tune event a couple months ago.

What do you guys think your cars will run? My best so far is 12.66 at around 110mph. I'm trying to get under the 12.5 mark and should be able to achieve that by heating the drag radials with the line lock.

14 would be nice lol

DTM · 05-03-2011, 05:12 AM

I used to go out literally every week, I was running 12.7 stock but sold that car, I'm picking up a new 2SS on Friday and will be down to roll out next wednesday =P

Bay Area SS · 05-03-2011, 07:23 AM

Im in

DarkObsession · 05-03-2011, 12:05 PM

Quote:

Originally Posted by pyr0b0y

what about may 25th? didnt u post that originally? anyways, im planning on heading up there this wednesday, but probably wont get there till 6 or 630 because of traffic.

Yeah, I posted that then stupidly realized that we have a major project at work that day

May is just a horrible month for work for me! :bangdesk:

I think I'm pretty solid on June 1st though. My wife has never been to a track so she wants to come and see what it is like so I think we'll try and get up there then. I would be happy to hit low 13s. I have a lot of experience drag racing but none in a manual so I'm sure my 60 is going to be terrible.

Let me know what you guys end up running tomorrow!

pyr0b0y · 05-03-2011, 03:02 PM

actually i just remembered....i got a 1/2 inch slash on my front passenger tire, probably wont pass tech inspection im guessing? I'll try and get it changed....

05-02-2011, 07:40 PM	#15
Briand069 Drives: 1997/1969 Camaro's Join Date: Aug 2009 Location: Vacaville, Ca Posts: 98	I should be there this Wednesday if all goes well at work. Brian __________________ 1969 Camaro LT1 4L60E 2010 Camaro 2SS/RS 6spd

05-02-2011, 07:43 PM	#16
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	i might be able to make this wednesday, what time r u planning on being up there. __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

05-02-2011, 10:22 PM	#18
DarkObsession Drives: 2011 Camaro SS2/LS3 Join Date: Feb 2011 Location: San Jose Posts: 329	I'm going to try and make it out on June 1st. I should be able to take a half day from work and be there right when they start at 4. Anybody up for the 1st? I know it's a ways away but work is crazy this month and maybe with some more notice, more people could make it __________________ 2011 Chevrolet Camaro SS2/LS3 - Pretty much bone stock (SLP SkipShift Eliminator, GTO clutch fluid reservoir mod) - 13.025 @ 110.492 MPH (12s?? ) 1998 Pontiac Grand Prix GTP (retired) - Cam, exhaust, CAI, 12 PSI, tune - 13.465 @ 101.04 MPH

05-02-2011, 10:51 PM	#19
Extreme454 www.norcalcamaros.com Drives: Red , L99 Join Date: Mar 2011 Location: Nor-Cal Brentwood Posts: 209 View My Garage	Another month or so and it gets so hot out at Infineon. So, if you wanna try it out, the sooner the better. Last edited by Extreme454; 05-02-2011 at 11:02 PM. Reason: spelling

05-02-2011, 11:01 PM	#20
DarkObsession Drives: 2011 Camaro SS2/LS3 Join Date: Feb 2011 Location: San Jose Posts: 329	Then I guess I'm going alone I really can't make out before then. I could go on the 11th but that is Motorcycle only night. __________________ 2011 Chevrolet Camaro SS2/LS3 - Pretty much bone stock (SLP SkipShift Eliminator, GTO clutch fluid reservoir mod) - 13.025 @ 110.492 MPH (12s?? ) 1998 Pontiac Grand Prix GTP (retired) - Cam, exhaust, CAI, 12 PSI, tune - 13.465 @ 101.04 MPH

05-02-2011, 07:53 PM	#17
Jason7 NorCalCamaros.com Drives: 2010 2SS White Join Date: Mar 2011 Location: California Delta Posts: 1,138 View My Garage	In reality 5 Jason

05-03-2011, 12:29 AM	#21
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	what about may 25th? didnt u post that originally? anyways, im planning on heading up there this wednesday, but probably wont get there till 6 or 630 because of traffic. __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

05-03-2011, 01:41 AM	#22
Jason7 NorCalCamaros.com Drives: 2010 2SS White Join Date: Mar 2011 Location: California Delta Posts: 1,138 View My Garage	I am down for whatever. I'm going to try to get there early as possible because ill have the posse with me, (wife and 5 week old daughter) Jason

05-03-2011, 01:53 AM	#23
Silver2SSRS6spd Prefer to be blown! Drives: 2010 Silver/Black 2SS/RS Manual Join Date: Mar 2010 Location: Nor-Cal Posts: 2,677 View My Garage	I'm down for it as soon as I get my car put back together and install the lineloc system I purchased a while back. I have a rain check with them after we were rained out during their test and tune event a couple months ago. What do you guys think your cars will run? My best so far is 12.66 at around 110mph. I'm trying to get under the 12.5 mark and should be able to achieve that by heating the drag radials with the line lock. __________________ MagnaCharger TVS-2300 550rwhp 540 rwt and a radical suspension under the car.

05-03-2011, 05:12 AM	#25
DTM DTMphotography Drives: 10' Camaro SS Join Date: Aug 2009 Location: SF Bay Area Posts: 585	I used to go out literally every week, I was running 12.7 stock but sold that car, I'm picking up a new 2SS on Friday and will be down to roll out next wednesday =P __________________ 2010 2SS/RS: 12.77 @ 111mph (muffler delete) - SOLD

05-03-2011, 07:23 AM	#26
Bay Area SS Drives: 2010 rs/2ss Join Date: Mar 2011 Location: ca bay area Posts: 669 View My Garage	Im in

05-03-2011, 03:02 PM	#28
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	actually i just remembered....i got a 1/2 inch slash on my front passenger tire, probably wont pass tech inspection im guessing? I'll try and get it changed.... __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Photos of Headlight Armor Smoked Taillight Kits at Night from 500 & 1000 ft	HeadlightArmor	Cosmetics and Lighting Modification Discussions	6	04-25-2010 12:14 PM
Fight last night!!!!	Motown Machine	Off-topic Discussions	10	03-17-2010 11:47 AM
'Shady Brook Farms' Cruise Night	Moose	General Automotive + Other Cars Discussion	9	08-29-2009 03:41 PM
Holy crap what a night	MerF	Off-topic Discussions	16	05-17-2009 09:29 AM