Your Nitrous Setup Pics - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ovenmitt · 06-04-2011, 07:37 PM

Quote:

Originally Posted by tylerSS

Ovenmitt.....i have the exact same setup coming today....anything in particular to look for during install.....was there anything speciafically you had problems with or any special tools needed(other than the norm).....thanks in advance!!!

The bottle bracket/heater is a bitch. Not the bracket itself but its hard to get the holes drilled in such a way that you can bolt/nut all three places. The frame rail interferes and if you don't have location right you can't get in there to nut the mount bolt(s). You'll also need a shrader valve tool for the fuel rail if you don't have one in your box. Buy extra butt connectors and ring connectors and at least 150ft of extra wire. You'll use them

Darth_Emma · 06-04-2011, 08:14 PM

mlee has an amazing nitrous set up. Check out his build thread.

DietCoke · 06-28-2011, 12:45 AM

moar!

06-28-2011, 12:45 AM	#17
DietCoke Slow Turtle Drives: 2011 1SS Join Date: Jun 2011 Location: Manhattan, KS Posts: 1,123	moar! __________________ LSXOCET - 404rwhp @ 1600 lbs curb weight... bonkers fast https://www.facebook.com/lsxocet

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modifying for " Dummies"	Dr Jkel	Tuning / Diagnostics -- engine and transmission	209	06-18-2012 12:24 AM
V6 Camaro's - NITROUS KIT!! Add 50-100 Horsepower - Phastek Performance	Sean@Phastek	V6 Bolt-Ons & Tunes	1	06-09-2010 01:29 PM

06-04-2011, 08:14 PM	#16
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	mlee has an amazing nitrous set up. Check out his build thread.