Changing RPM shift point's? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JamesZL1 · 03-07-2015, 01:59 PM

yeah I am only in 4th gear when I'm trapping..I have an A6 as well..

Buckstadler · 03-08-2015, 11:34 AM

I put it in Track mode 5 and let it rip. Is hitting 6th a good thing or bad?

Bigtime53 · 03-08-2015, 04:05 PM

Quote:

Originally Posted by Buckstadler

I put it in Track mode 5 and let it rip. Is hitting 6th a good thing or bad?

Bad Bad! If you shift at redline I would think you should not get out of 4th gear when you run thru the traps,and at the very most just get into fifth. Going into sixth something is not right.

JANNETTYRACING · 03-12-2015, 03:24 PM

Quote:

Originally Posted by Buckstadler

Has anyone changed the RPM shift point from 6300? If so what would give the most Preformance gains? I have an Automatic.

Factory rev limiters are set to 6200 shift points are set to 6000.

I raise the rev limiter to 6600 and raise the shift points to 6200-6400 depending on the application and usage.

Ted.

mrvenicess · 03-13-2015, 08:38 AM

My modded Z is set to shift between 6700-7000 depending on which gear its in. I have changed the cam and valve springs so it is safe at those rpms. No way you should be in 6th gear through the traps. Im still in 4th at 140 mph.

ninsecgt · 03-15-2015, 03:26 PM

Quote:

Originally Posted by mrvenicess

My modded Z is set to shift between 6700-7000 depending on which gear its in. I have changed the cam and valve springs so it is safe at those rpms. No way you should be in 6th gear through the traps. Im still in 4th at 140 mph.

So who or where can one take his zl1 to get this proper tune done. Preferably in Miami Dade county but if I must go elsewhere I will?

mrvenicess · 03-16-2015, 07:35 AM

Quote:

Originally Posted by ninsecgt

So who or where can one take his zl1 to get this proper tune done. Preferably in Miami Dade county but if I must go elsewhere I will?

I only go to FSP on the west coast just south of Tampa. Matt is the best.

ninsecgt · 03-19-2015, 08:29 PM

Quote:

Originally Posted by mrvenicess

I only go to FSP on the west coast just south of Tampa. Matt is the best.

Copy that and thanks but what does fsp stand for?

mrvenicess · 03-23-2015, 07:49 AM

Florida Speed and Power.

03-07-2015, 01:59 PM	#15
JamesZL1 Drives: 2013 ZL1 A6 Camaro, 2015 C7 A6 Z51 Join Date: Apr 2014 Location: Oklahoma Posts: 396	yeah I am only in 4th gear when I'm trapping..I have an A6 as well.. __________________ Roto-Fab CAI, Texas Speed Headers, Texas Speed X-Pipe, Texas Speed LS3-B Blower Cam, Metco 9.10" Crank Pulley, Metco 2.5 Upper Pulley, ID 850 Injectors, LPE Ported Throttle Body, Alky Control Methanol kit, E2 Catch Can, 610HP / 608 Torque.

03-08-2015, 11:34 AM	#16
Buckstadler Drives: 2013 ZL1 White/Carbon fiber Vin#658 Join Date: Oct 2013 Location: Yakima Wa Posts: 63	I put it in Track mode 5 and let it rip. Is hitting 6th a good thing or bad?

03-13-2015, 08:38 AM	#19
mrvenicess Drives: 2013 CRT ZL1 auto Join Date: May 2010 Location: Venice Fl Posts: 1,443 View My Garage	My modded Z is set to shift between 6700-7000 depending on which gear its in. I have changed the cam and valve springs so it is safe at those rpms. No way you should be in 6th gear through the traps. Im still in 4th at 140 mph.

03-23-2015, 07:49 AM	#23
mrvenicess Drives: 2013 CRT ZL1 auto Join Date: May 2010 Location: Venice Fl Posts: 1,443 View My Garage	Florida Speed and Power.