10-27-2015, 04:47 PM | #15 |
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
U dont need to touch those to reseal or replace seals/dust boots. That caliper bolt shouldnt be touched since now you compromise seal between two halfs. I would buy calipers from forum since the base ones are very cheap non painted. Try amazon too.
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
03-30-2018, 04:50 PM | #16 |
Drives: 2010 Camaro 2SS Join Date: Mar 2018
Location: Bakersfield, CA
Posts: 320
|
Bolts
Would this be the correct part number for the 4 bolts in the Rear? 11515781
them seem to be different sizes 16mm bracket bolts Caliper Bolts size and part number? |
03-31-2018, 08:56 AM | #17 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
|
04-01-2018, 09:51 PM | #18 |
Drives: Rally Yellow Camaro+Avalanche Join Date: Dec 2009
Location: Vancouver
Posts: 1,110
|
I'm pretty sure you won't find those reverse torx bolts separate and will have to buy a whole new set of calipers. As another posted stated, shouldn't have separated your calipers for powder coat.
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter+2012LS3VERT bushing, Quantum Brake Ducts, JDP Tow Hook Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter. Pfadt coilovers, camber plates, trailing arms, Pegasus Solid Subframe. Pedders ZL1 barz, radius arm & steering rack bushings. BMR adjustable toe-rods. Hotchkis Max Chassis Brace. ZL1 GMPP Driveline Upgrade. TurnOne P/S pump. CTS-V 6 pistons.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM |
04-13-2018, 09:09 PM | #19 |
Drives: 2015 Z28 Join Date: Nov 2015
Location: Brighton, mi
Posts: 31
|
You will not find this bolt for sale. Through GM, you will actually have to buy a new caliper or find a used one on eBay.
|
|
|
|
|