Nitto or Mickey - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

760bowtie · 09-04-2015, 04:38 PM

Quote:

Originally Posted by 10aSSee D

Is this the SS tire? It says ET street radial.

And where did you score them? I've been trying to find a set of MT with no luck. Everyone tells me they're on a nationwide backorder with no ETA. I might just have to go with the NT05Rs.

TurboLSx · 09-08-2015, 09:01 PM

That's the ET street radial II, got them from Jegs.
The S/S is due to be out in October

760bowtie · 09-08-2015, 09:05 PM

Finally found some MT ET street r. Should be getting them on Friday.

HeavyChevySSRS · 09-08-2015, 11:34 PM

Lemme know how you like them bowtie. I might be getting a set of those depending on the feedback. Doesn't seem like many have the r tires. A lot have the et street like above.

TurboLSx · 09-09-2015, 08:15 AM

Quote:

Originally Posted by HeavyChevySSRS

Lemme know how you like them bowtie. I might be getting a set of those depending on the feedback. Doesn't seem like many have the r tires. A lot have the et street like above.

R tires? Does he mean radials?

HeavyChevySSRS · 09-09-2015, 08:57 PM

Quote:

Originally Posted by TurboLSx

R tires? Does he mean radials?

I mean the et street r tires

760bowtie · 09-11-2015, 10:54 PM

Tires are on. Hopefully I'll get to test them out next Friday.

10aSSee D · 09-14-2015, 04:30 PM

Quote:

Originally Posted by 760bowtie

Tires are on. Hopefully I'll get to test them out next Friday.

Are those the MT R? Are they track only? Look really good from the side, post a pic on your car when you get them on

760bowtie · 09-14-2015, 04:38 PM

Quote:

Originally Posted by 10aSSee D

Are those the MT R? Are they track only? Look really good from the side, post a pic on your car when you get them on

Yea, ET Street R. DOT tires, I'll drive on them down to the track.

760bowtie · 09-15-2015, 08:20 PM

Crappy pic, I'll take better ones tomorrow.

10aSSee D · 09-16-2015, 05:19 PM

Man those look really good! Is that on an 18 inch wheel?

760bowtie · 09-16-2015, 06:15 PM

Quote:

Originally Posted by 10aSSee D

Man those look really good! Is that on an 18 inch wheel?

Yea, factory reproductions Z06 Spyder replica wheels 18X9.5 +40 offset. Here's a better pic

HeavyChevySSRS · 09-16-2015, 08:24 PM

They look like slicks in your pics lol. So nasty love it

10aSSee D · 09-17-2015, 10:02 AM

Great pic!! Looks really good. Got any shots from the back?

09-08-2015, 09:05 PM	#17
760bowtie Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014 Location: Oceanside, CA Posts: 1,487	Finally found some MT ET street r. Should be getting them on Friday. __________________ AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6

09-08-2015, 11:34 PM	#18
HeavyChevySSRS Drives: 2010 SSRS Join Date: Apr 2015 Location: Winnipeg Posts: 75	Lemme know how you like them bowtie. I might be getting a set of those depending on the feedback. Doesn't seem like many have the r tires. A lot have the et street like above. __________________ As I lay rubber down the street I pray for traction k can keep, but if I spin and begin to slide please dear god, protect my ride[/I] 10' ls3 2SS/RS, gfx pkg, stainless headers, 3" stainless exhaust, rotofab cai, custom stage 3 cam, 4:11 gears, wall tuned

09-11-2015, 10:54 PM	#21
760bowtie Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014 Location: Oceanside, CA Posts: 1,487	Tires are on. Hopefully I'll get to test them out next Friday. Attached Images __________________ AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6

09-15-2015, 08:20 PM	#24
760bowtie Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014 Location: Oceanside, CA Posts: 1,487	Crappy pic, I'll take better ones tomorrow. Attached Images __________________ AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6

09-16-2015, 05:19 PM	#25
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	Man those look really good! Is that on an 18 inch wheel? __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

09-08-2015, 09:01 PM	#16
TurboLSx Drives: 2001 Trans-Am Join Date: Aug 2015 Location: Gulf Coast, MS Posts: 10	That's the ET street radial II, got them from Jegs. The S/S is due to be out in October

09-16-2015, 08:24 PM	#27
HeavyChevySSRS Drives: 2010 SSRS Join Date: Apr 2015 Location: Winnipeg Posts: 75	They look like slicks in your pics lol. So nasty love it __________________ As I lay rubber down the street I pray for traction k can keep, but if I spin and begin to slide please dear god, protect my ride[/I] 10' ls3 2SS/RS, gfx pkg, stainless headers, 3" stainless exhaust, rotofab cai, custom stage 3 cam, 4:11 gears, wall tuned

09-17-2015, 10:02 AM	#28
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	Great pic!! Looks really good. Got any shots from the back? __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq