Help Please.....

[JANNETTYRACING]

Originally Posted by solo3445

hello i have a catch can install when it was in the shop for the supercharger. i have to empty the catch can twin now . the car only have 3000 miles on it. Can you look at the pictures and tell me if i have the line going to the right place on the engine..thanks..

LS3 and L99 have different routing.

In either case yours appears to be wrong.

Your passenger side valve cover goes to the fitting on the Rotofab pipe not the catch can.

LS3 should go from the valley plate to the catch can then on to the blower where you are connected now.

L99 Should go from the Drivers side valve cover to the catch can then on to the blower where you have it connected now.

Ted.

[solo3445]

i have a l99

[solo3445]

so if i have s l99 is that hook up right...

[sscamaro]

Originally Posted by JANNETTYRACING

LS3 and L99 have different routing.

In either case yours appears to be wrong.

Your passenger side valve cover goes to the fitting on the Rotofab pipe not the catch can.

LS3 should go from the valley plate to the catch can then on to the blower where you are connected now.

L99 Should go from the Drivers side valve cover to the catch can then on to the blower where you have it connected now.

Ted.

Ted, I have the EE catch can. I have the intake going to the passenger side valve cover(LS3) and the out going behind the throttle body, see picture . I works ok, what's the difference?

[solo3445]

where do this line go on the can. it was on top at first....