Brake pads

[FASTFATBOY]

Originally Posted by CamaroCracka

I follow what you are saying about the pad material melting to the rotor and causing pulsing, but can you elaborate on rotors not warping? Certainly, the runout on a rotor can get out of spec, which is what I have always thought people meant when they said they had a warped rotor. You've mentioned this a couple times and I'm just not familiar with what you are referring to. I skimmed the articles, but I have seen rotors that are physically out of spec on runout as measured by a dial indicator. I'm not saying it was caused by heat, but one article mentioned non-metalic pads and modern resins, but rotors with excessive runout predate ceramic brake pads by decades.

Any brake pad that has had the operating temp ceiling exceeded will melt onto the rotor.

What you measured is brake pad deposits on the face of the rotor.

[FASTFATBOY]

OP, this will fix the shaking rotors, look up how to use it.

https://www.summitracing.com/parts/w...oaAtAgEALw_wcB


This will also fix them

https://alconkits.com/alcon-brake-to...ing-kit-detail

[FasNuf]

cool, Thanks for the skool !