DIY part # for ABL (Pictures of Installation included!!!) - Page 27 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

n201mw · 01-29-2011, 11:55 AM

Thanks Ofer! Any chance you were able to send out that harness and light pipe to me yet?

Dr.Bender · 01-29-2011, 12:30 PM

ugh... trying to find the connector is a pain...trying not to slice trough my electrical system!

Dr.Bender · 01-29-2011, 12:59 PM

Ok... I cannot find the connector anywhere! HELP!

Please tell me that someone with a 2011 has tried this...

Dr.Bender · 01-29-2011, 01:13 PM

@#%%!!! Just Read Jocoo's post. Im not splicing wires for this Mod.
Going to put it all back together now.

Anyone want the Kit i bought?

RiCorvette · 01-29-2011, 01:22 PM

Quote:

Originally Posted by Dr.Bender

@#%%!!! Just Read Jocoo's post. Im not splicing wires for this Mod.
Going to put it all back together now.

Anyone want the Kit i bought?

ME!

TJ91 · 01-29-2011, 01:45 PM

You could use ttaps?
Or you could always just use a 3 way connector on the one free connector that your 2011 should have on the drivers side.
The mod is worth it!
Dont give up lol

Dr.Bender · 01-29-2011, 01:57 PM

Frustrating...This is probably the only Mod I wanted to do.

I am lame, I cannot even find the driver side connector.

I call it "car-illiterate"

Ofer, can you make me a 3-way splitter?

BTW: My Droid takes some pretty nice photos!

TJ91 · 01-29-2011, 02:56 PM

WTH? they stopped making the driver side as well?!
Honestly, the mod is worth it and t taps are safe and you will have no problems with neither is it hard to do. Very simple. I would do it that way

Gene Culley · 01-29-2011, 06:20 PM

Quote:

Originally Posted by 2SSRS

Door panel, There is a blank connector on the far side of the light pipe from the factory where you can add a second LED, that was the way my car came.

Ok, thanks Ofer. This is the first time I'm hearing about another connector in the door panel. I'm game for that one, lol. Thanks man!

Gene Culley · 01-29-2011, 06:23 PM

Quote:

Originally Posted by Dr.Bender

@#%%!!! Just Read Jocoo's post. Im not splicing wires for this Mod.
Going to put it all back together now.

Anyone want the Kit i bought?

Oh man, I didn't realize you had a 2011. There are no connectors for 2011, but you can t tap like the others have said. Has anyone tried the add-on fuses for this? When I was doing some electrical mods on my last vehicle I used the littelfuse add-a-circuit.

SSinister 2010 · 01-29-2011, 10:51 PM

hey 2SSRS makes a harness so you dont have to tap check on that first

Dr.Bender · 01-30-2011, 12:33 AM

2SSRS is going to give a brother a hand.

WCoolBreeze · 01-30-2011, 02:39 AM

Hey Ofer

My car has that Blank Connector with no LED in it also, remember my car is one of the Per-Orders. So to do the ABL completely around each of the door panels there are three lights, so I just need to get two more LED Lights for each door?

Walt B.

*TAG UR IT* · 01-30-2011, 11:02 AM

Quote:

Originally Posted by TonyNo

So, for the no-drill version, is this the part needs to be broken?

that is not the part but looks similar. You will see on the part where the snap is to get it all together. Once you squeeze that light through the dash, see if you can put it back together. You'll see...just try...

Quote:

Originally Posted by Dr.Bender

Ok... I cannot find the connector anywhere! HELP!

Please tell me that someone with a 2011 has tried this...

You won't have one if you have a 2011 or a vin past 50000

Quote:

Originally Posted by Dr.Bender

2SSRS is going to give a brother a hand.

DO NOT give up. Instead of snapping it into a previous connector that you don't have, just t-tap the darn thing. It won't hurt anything at all and that's what everyone else has had to do. It'll work just fine.

Quote:

Originally Posted by WCoolBreeze

Hey Ofer

My car has that Blank Connector with no LED in it also, remember my car is one of the Per-Orders. So to do the ABL completely around each of the door panels there are three lights, so I just need to get two more LED Lights for each door?

Walt B.

That blank connector with no LED is just there to hold the light pipe in place. You can switch it out if you want. There really only needs to be one light source in each door. I don't know why people want to add two. Total, there should only be 5 lights being used on the entire deal.

One for each door, one for the left drivers side dash, and two for the passenger side dash...one on each side of the tube.

01-29-2011, 01:45 PM	#370
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,035	You could use ttaps? Or you could always just use a 3 way connector on the one free connector that your 2011 should have on the drivers side. The mod is worth it! Dont give up lol __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

01-29-2011, 01:57 PM	#371
Dr.Bender Drives: 2011 2SS/RS Join Date: Jun 2010 Location: Pasadena, CA Posts: 462 View My Garage	Frustrating...This is probably the only Mod I wanted to do. I am lame, I cannot even find the driver side connector. I call it "car-illiterate" Ofer, can you make me a 3-way splitter? BTW: My Droid takes some pretty nice photos! Last edited by Dr.Bender; 01-29-2011 at 02:30 PM.

01-29-2011, 02:56 PM	#372
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,035	WTH? they stopped making the driver side as well?! Honestly, the mod is worth it and t taps are safe and you will have no problems with neither is it hard to do. Very simple. I would do it that way __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

01-30-2011, 02:39 AM	#377
WCoolBreeze 2SS Drives: 2016 2SS, Red Garnet Tint Join Date: Nov 2008 Location: Imperial, CA Posts: 1,343	Hey Ofer My car has that Blank Connector with no LED in it also, remember my car is one of the Per-Orders. So to do the ABL completely around each of the door panels there are three lights, so I just need to get two more LED Lights for each door? Walt B. __________________ 2016 Camaro 2SS 2005 Dodge Magnum R/T (Yes it has a Hemi) 1987 Camaro RS (California Special) - For Sale Gen6, 2016 Camaro 2SS, Red Garnet Tint (with Silver Rally Stripes) Ordered: 2-12-2016 TPW: 3-7-2016 Built: 3-7-2016 VIN 1G1FH78G0157626 Delivered: 4-26-2016

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
EXHAUST	Milk 1027	Wiki	2	03-07-2010 10:20 PM
IMPORTANT Part 1 Warranty Disputes	Zeus	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	08-25-2009 12:37 PM
got my new Camaro today pictures included !!	yesno20102ssblack	Camaro Photos \| Spyshots \| Video \| Media Gallery	33	05-02-2009 11:05 AM
First Camaro Impressions (Pictures Included) --- Red Jewel Tintcoat!	dect	Camaro Photos \| Spyshots \| Video \| Media Gallery	80	01-27-2009 07:45 PM

01-29-2011, 11:55 AM	#365
n201mw Drives: 2010 Camaro 2SS/RS IBM 6spd Join Date: Jan 2011 Location: Minneapolis Posts: 101	Thanks Ofer! Any chance you were able to send out that harness and light pipe to me yet?

01-29-2011, 12:30 PM	#366
Dr.Bender Drives: 2011 2SS/RS Join Date: Jun 2010 Location: Pasadena, CA Posts: 462 View My Garage	ugh... trying to find the connector is a pain...trying not to slice trough my electrical system!

01-29-2011, 12:59 PM	#367
Dr.Bender Drives: 2011 2SS/RS Join Date: Jun 2010 Location: Pasadena, CA Posts: 462 View My Garage	Ok... I cannot find the connector anywhere! HELP! Please tell me that someone with a 2011 has tried this...

01-29-2011, 01:13 PM	#368
Dr.Bender Drives: 2011 2SS/RS Join Date: Jun 2010 Location: Pasadena, CA Posts: 462 View My Garage	@#%%!!! Just Read Jocoo's post. Im not splicing wires for this Mod. Going to put it all back together now. Anyone want the Kit i bought?

01-29-2011, 10:51 PM	#375
SSinister 2010 Drives: 2ss camaro 2010 Join Date: Jan 2011 Location: brownsville texas Posts: 235	hey 2SSRS makes a harness so you dont have to tap check on that first

01-30-2011, 12:33 AM	#376
Dr.Bender Drives: 2011 2SS/RS Join Date: Jun 2010 Location: Pasadena, CA Posts: 462 View My Garage	2SSRS is going to give a brother a hand.