San Antonio Camaro Club (SACC)

[Atti2de]

Check your exhaust hangers?

[Happy Pappy]

Originally Posted by familyofcamaros89

ive been looking for days and still cant figure it out heres the deal.
everytime i hit the gas on my car all i hear is rattleing from the rearend. but not only when i hit the gas its when i go over a bump and when im just cruzeing. its bugging me i cant find it and im stressing it cuz it makes my car sound terrible help HELP HELP!!!!!!!!!!!!!

If you have any kind of after market exhaust installed check the tunnel brace. If the exhaust has dropped at all it will cause a rattling noise and drive you crazy. You just need to readjust the exhaust pipes and tighten the clamps.

[familyofcamaros89]

Originally Posted by summitSS

So basically it's doing it all the time. What about fluid level in rear end. Do you smell anything like burned oil/grease?

i never thought about the fluid ill cheak that tomarro.
and no burning smell and it only rattles on bumps and when you hit the gas.

[familyofcamaros89]

Originally Posted by Atti2de

Check your exhaust hangers?

yea ill see whats going on cuz it was doing it off and on but now its bad

[familyofcamaros89]

Originally Posted by Happy Pappy

If you have any kind of after market exhaust installed check the tunnel brace. If the exhaust has dropped at all it will cause a rattling noise and drive you crazy. You just need to readjust the exhaust pipes and tighten the clamps.

alright ill put it up on the ramps tomarro and just tighten everything thanks

[Rizzo]

Originally Posted by familyofcamaros89

alright ill put it up on the ramps tomarro and just tighten everything thanks

While you have it up on the ramps, check the tightness of bolt on the rear of the drive train.

Michael Shaw had an issue where a few bolts worked themselves loose and caused some major damage.

-Rizzo

[2010ABM]

Originally Posted by Rizzo

While you have it up on the ramps, check the tightness of bolt on the rear of the drive train.

Michael Shaw had an issue where a few bolts worked themselves loose and caused some major damage.

-Rizzo

[familyofcamaros89]

Originally Posted by Rizzo

While you have it up on the ramps, check the tightness of bolt on the rear of the drive train.

Michael Shaw had an issue where a few bolts worked themselves loose and caused some major damage.

-Rizzo

Was that a problum with the 1987 to? :0 or just in general
And yea I heard about that I definatly can't afford that to happen to my car

[familyofcamaros89]

Ive spent the last 5 hours under the rearend of my car looked at everything and still no dice I'm figureing the shocks,springs,ebrake but I can't figure that stuff out till tomarro hopefully i can get to the meet

[JusticePete]

Originally Posted by familyofcamaros89

Ive spent the last 5 hours under the rearend of my car looked at everything and still no dice I'm figureing the shocks,springs,ebrake but I can't figure that stuff out till tomarro hopefully i can get to the meet

Shocks would rarely rattle. The only way a shock would rattle is if the rubber at either end has deteriorated to the point there was metal to metal contact assuming the bolts / nuts are tight. Inspect the shock rubber at both ends.

[Hennesseyrgv]

Hey guys wheres the meet tonight l, need adress and time. I got 10 members from the south ,(camaro5line. We are arriving in about 2 hrs from now

[JusticePete]

I was really hoping to get out and see all of you this weekend, but my family has me going in a different direction

[DMDTexAg06]

Originally Posted by Hennesseyrgv

Hey guys wheres the meet tonight l, need adress and time. I got 10 members from the south ,(camaro5line. We are arriving in about 2 hrs from now

Bun n Barrel
1150 Austin Highway San Antonio, TX 78209
People start showing up around six.

[familyofcamaros89]

Originally Posted by JusticePete

Shocks would rarely rattle. The only way a shock would rattle is if the rubber at either end has deteriorated to the point there was metal to metal contact assuming the bolts / nuts are tight. Inspect the shock rubber at both ends.

alright ill take a look at that right now ive looked over everything i could think of except the ebroke i may take the whole braket off and call it a day if thats what it is.