Rapid Fire LED Tail Lights Issue - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

OKCwhiteKnight · 04-07-2012, 10:56 PM

Quote:

Originally Posted by bajamoon

Check for a fuse or loose plug?

found it, eng. fuse box #33 BCM 6 blown...solved the problem

bajamoon · 04-07-2012, 11:13 PM

Quote:

Originally Posted by OKCwhiteKnight

found it, eng. fuse box #33 BCM 6 blown...solved the problem

Sweet glad you found it. Wonder why it blew

SpkCamaro12 · 04-08-2012, 03:30 AM

Ya, I finally got my taillight in last month and installed 1:30 in the morning when I got it! And I havnt had no problems with them and I love these lights..

P.S. Only problem I am actually having is the passenger inside light gets condensation on the lens.

whidobie · 04-08-2012, 07:38 AM

My lights arrive Monday UPS. Can't wait but at least if something happens, you guys showed me the way!

rjdapilmoto · 04-08-2012, 08:06 AM

These lights are awesome!!

Abstrak · 04-08-2012, 09:53 AM

Ive found my problem its a loose connection on the resistor. I can pick this exact one up for 9 bucks but i dont kno which is pos or neg. Well looks like the only place to get this resistor is online so i might as well hit Todd up and get a new one sent out. Anybody know if Home Depot or Radio Shack sell theses?

OKCwhiteKnight · 04-08-2012, 10:36 AM

I've seen them at some autoparts,they sell led bulbs,.....50w but 3ohms, those appear to be 6 ohms.

OKCwhiteKnight · 04-08-2012, 10:25 PM

Quote:

Originally Posted by bajamoon

Sweet glad you found it. Wonder why it blew

Just blew 2 more,def not tecno.tails,I haven't put them back in yet. On going trouble shooting involving just installed JDP halo's.

Jeremeymt · 04-10-2012, 10:43 PM

I finally got my lights today (after 7 weeks on order) and it took about 2 hours to put them in. My passenger inner light was going too fast but it turned out I had the harness coming out of the lights plugged in upside down. They explain to make sure the side with the white stripe is closest to the ramp but I couldn't quite understand what that meant? Anyways now they work!

JCL-2SS · 04-10-2012, 11:34 PM

I have had issues with outside lights not being sealed properly and actually taking on water whenever there is hard rain or car wash, my first set the drive outside i could have put fish in it. something shorted an some LEDs stayed on. Technostalgia replaced the outer ones then the replacement driver side leaked, now the replacement of the replacement got condensation inside when i went through car wash last week, i give up, might pull them out and try resealing myself. I will say that they do look great when they work

Jeremeymt · 04-12-2012, 07:26 PM

I went to the car wash for the first time today since I installed the lights and they did not take on any water (thankfully). Sorry yours are giving you such an issue man!

Abstrak · 04-12-2012, 08:35 PM

Im takin mines to get washed tomorrow his post had me kind of nervous

Jeremeymt · 05-14-2012, 12:03 AM

So I THOUGHT mine would not take on water but I was wrong. One of my has about 2 inches of water sitting in it since we have had heavy rain all weekend. Does anyone know the email for technostalgia so I can figure out how to get a replacement?

ChriSS84 · 05-14-2012, 03:07 AM

These lights are junk!

04-08-2012, 03:30 AM	#31
SpkCamaro12 Drives: 2012 IOM 2LT RS - Traded In Join Date: Nov 2011 Location: Port Richey, Florida Posts: 367	Ya, I finally got my taillight in last month and installed 1:30 in the morning when I got it! And I havnt had no problems with them and I love these lights.. P.S. Only problem I am actually having is the passenger inside light gets condensation on the lens. __________________ TRADED IN - 2012 2LT RS - VMAX Throttle Body - MRT V1 - CAI - Trifecta Tune - Matching Interior Lightning (Footwells and Dome) - Sequential Taillights - Blacked out Front n Back Bowties - 228VX Train Horn Traded for 2011 Corvette

04-08-2012, 09:53 AM	#34
Abstrak Drives: 2012 AGM Camaro LS / Team LFX Join Date: Feb 2012 Location: Maryland Posts: 546	Ive found my problem its a loose connection on the resistor. I can pick this exact one up for 9 bucks but i dont kno which is pos or neg. Well looks like the only place to get this resistor is online so i might as well hit Todd up and get a new one sent out. Anybody know if Home Depot or Radio Shack sell theses? Attached Images __________________

04-08-2012, 10:36 AM	#35
OKCwhiteKnight Drives: 2010 2LT RS Camaro 2015 Colorado Join Date: Dec 2009 Location: Oklahoma Posts: 725	I've seen them at some autoparts,they sell led bulbs,.....50w but 3ohms, those appear to be 6 ohms. __________________

04-10-2012, 11:34 PM	#38
JCL-2SS Drives: 2010 2SS Imperial Blue Join Date: Mar 2010 Location: Lindenhurst, NY Posts: 216	Taillights taking on water I have had issues with outside lights not being sealed properly and actually taking on water whenever there is hard rain or car wash, my first set the drive outside i could have put fish in it. something shorted an some LEDs stayed on. Technostalgia replaced the outer ones then the replacement driver side leaked, now the replacement of the replacement got condensation inside when i went through car wash last week, i give up, might pull them out and try resealing myself. I will say that they do look great when they work Attached Images __________________ 2010 2SS IBM L99 6A, Janetty Tune, Dynatech headers and cats, Flowmaster exaust, SLP underdive pulley, CAI inc. CAI, MSD wires, LED's -taillights, side markers, knight rider, interior, Chevy emblem, rear plate

04-12-2012, 08:35 PM	#40
Abstrak Drives: 2012 AGM Camaro LS / Team LFX Join Date: Feb 2012 Location: Maryland Posts: 546	Im takin mines to get washed tomorrow his post had me kind of nervous __________________

04-08-2012, 07:38 AM	#32
whidobie Drives: 2011 Camaro Convertible 2SS RS Join Date: Dec 2010 Location: Bergen County, New Jersey Posts: 270	My lights arrive Monday UPS. Can't wait but at least if something happens, you guys showed me the way!

04-10-2012, 10:43 PM	#37
Jeremeymt Drives: 2018 Hot Wheels 2LT Join Date: Jul 2010 Location: La Vergne TN Posts: 454	I finally got my lights today (after 7 weeks on order) and it took about 2 hours to put them in. My passenger inner light was going too fast but it turned out I had the harness coming out of the lights plugged in upside down. They explain to make sure the side with the white stripe is closest to the ramp but I couldn't quite understand what that meant? Anyways now they work!

04-12-2012, 07:26 PM	#39
Jeremeymt Drives: 2018 Hot Wheels 2LT Join Date: Jul 2010 Location: La Vergne TN Posts: 454	I went to the car wash for the first time today since I installed the lights and they did not take on any water (thankfully). Sorry yours are giving you such an issue man!

05-14-2012, 12:03 AM	#41
Jeremeymt Drives: 2018 Hot Wheels 2LT Join Date: Jul 2010 Location: La Vergne TN Posts: 454	So I THOUGHT mine would not take on water but I was wrong. One of my has about 2 inches of water sitting in it since we have had heavy rain all weekend. Does anyone know the email for technostalgia so I can figure out how to get a replacement?

05-14-2012, 03:07 AM	#42
ChriSS84 Account Suspended Drives: 2SS Join Date: Oct 2009 Location: Cincinnati,Ohio Posts: 850	These lights are junk!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HOW DO WE LIKE THE LED TAIL LIGHTS?	carguy50	Cosmetics and Lighting Modification Discussions	15	05-14-2011 01:49 AM
Camaro TINTED TAIL LIGHTS!!!!!!!	MotorCityCustoms	Cosmetics and Lighting Modification Discussions	4	02-22-2010 10:04 PM
LED Tail lights	69er	Cosmetics and Lighting Modification Discussions	16	12-17-2009 02:31 PM
New LED Tail Lights for us 3rd Genners!	Sinister	3rd Generation Camaros	8	09-25-2009 07:12 PM