How much did your audio mod cost and how would you rate it?

[CreeperRS]

$2800 so far. Speakers, sub, amps, HU, digital processor, Perfect fit kit, everything ALPINE. Also capacitor, dynamat, FARK kit and speaker adapters. Stinger wires and fuses. Monster RCA cables. Will post pictures when I'm done. Still trying to take off the rear seats. Work in progress!

[Cmarlo57]

Just in case you're curious

[darkrider01]

So far, it has cost me $2060. I have done everything myself (not quite done yet) but I will have some pretty sweet stuff to show for it soon.

Rundown:
Rockford Fosgate T1000-1bdcp (mono Sub amp)
Rockford Fosgate T1D215 (15" subwoofer)
Rockford Fosgate T2652-S (6.5" component set)
Alpine MRV-F357 (5 channel front+rear amp - not using sub output)
AudioControl LC6i (line output converter)
******** 15" Camaro sub box
******** FARK wiring harnesses
Dynamat Xtreme (for rear shelf only)

Future plans are adding Rockford Fosgate T1692 6x9's in the rear, and possibly another 100 square feet of Dynamat. I will probably also replace the Alpine MRV-F357 with a Rockford Fosgate T600-4.

The sad part is that I spent $291 of that trying to eliminate the turn-off pop/click/thump. I'll have a write completed soon so that people from now on can spend just $30-$35 to eliminate the turn-off click/pop/thump.

[mycamaro2011]

Just got a
1000 watt @ 2ohm's MTX Road Thunder AMP for $180 Shipped
2 Kicker 10CVT12-4 12" 1600 Watt Shallow Mount Car Subwoofers for $180 shipped

[bigted83]

106 dollars has I already had everything thing I needed, I added to Orion cobalt 12s and a 500 watt kicker amp haven't decided to put New speakers in yet even tho I have all the parts I need from sbthump and it sounds good to me

[spckatnip]

Right around $3000 for parts, labor and warranties for me.

Alpine INA-W910
Perfect Fit Dash Kit
Kenwood Backup Camera
******** 10" Large Stealth box for the convertible
JL 10W7AE 10" Subwoofer
JL XD 600/1 Amp

[CrutchfieldBrooke]

Originally Posted by spckatnip

Right around $3000 for parts, labor and warranties for me.

Alpine INA-W910
Perfect Fit Dash Kit
Kenwood Backup Camera
******** 10" Large Stealth box for the convertible
JL 10W7AE 10" Subwoofer
JL XD 600/1 Amp

Awesome. I was just reading thru all of the responses to your initial question to see what everyone else had done. Do you have everything installed and working now?

[darkrider01]

Originally Posted by darkrider01

So far, it has cost me $2060. I have done everything myself (not quite done yet) but I will have some pretty sweet stuff to show for it soon.

Rundown:
Rockford Fosgate T1000-1bdcp (mono Sub amp)
Rockford Fosgate T1D215 (15" subwoofer)
Rockford Fosgate T2652-S (6.5" component set)
Alpine MRV-F357 (5 channel front+rear amp - not using sub output)
AudioControl LC6i (line output converter)
******** 15" Camaro sub box
******** FARK wiring harnesses
Dynamat Xtreme (for rear shelf only)

Future plans are adding Rockford Fosgate T1692 6x9's in the rear, and possibly another 100 square feet of Dynamat. I will probably also replace the Alpine MRV-F357 with a Rockford Fosgate T600-4.

The sad part is that I spent $291 of that trying to eliminate the turn-off pop/click/thump. I'll have a write completed soon so that people from now on can spend just $30-$35 to eliminate the turn-off click/pop/thump.

Funny how fast things can change. Ordered a Rockford Fosgate T400-4 and some Power Series T1692's (6X9's) and another 40 sq. ft. of Dynamat. I also ordered a Clarion EQS746 (7 band EQ). The AudioControl LC6i and Alpine will be sold off now to possibly make way for a second T400-4. I may have gone off the deep end