ZL1 + 17 inch Weld RT-S 71 drag pack - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dutchman427 · 02-09-2016, 03:54 PM

Quote:

Originally Posted by phatskeemz

Driving on the street with the 17x5's definitely feels a little different but not bad at all that being said I only drive it with the 17 inch setup to and from the track other then that I use my factory 20's

Personally if I were going to run the weld setup all the time I would keep the 17's on the rear and go with a 20x8 or 20x10 in the front and keep the 17x5's for the track

David

I appreciate your response David.

GODZL1A · 02-10-2016, 07:33 AM

No problem glad I could help

David

GODZL1A · 02-18-2016, 12:25 PM

I was able to make it to PBIR last night and I went almost a tenth faster.

The only thing I did was launch in D instead of M, I trapped about 5 MPH faster all night. I made about 10 passes ranging from 10.80 to 10.698 with the majority of them being 10.7's.

David

Dutchman427 · 02-18-2016, 01:42 PM

Looks great and great times!

GODZL1A · 07-05-2016, 04:36 AM

Finally got my new tag

GODZL1A · 08-17-2016, 03:14 PM

I installed my AFCO heat exchanger & Roto-Fab reservoir over the weekend with some help from a friend I also rerouted the hoses to make it look a little cleaner

Zee66 · 08-20-2016, 06:15 AM

Quote:

Originally Posted by GODZL1A

I installed my AFCO heat exchanger & Roto-Fab reservoir over the weekend with some help from a friend I also rerouted the hoses to make it look a little cleaner

Was it easy to bleed?

GODZL1A · 08-20-2016, 07:19 AM

Yes it was.......I seen the other tread that's going on about it but from what I was told if there's air in the system the IAT2 temps will sky rocket at idle mine stay around 90 degrees

David

atomicfusion · 09-20-2016, 11:44 AM

If anyone needs drag packs like this I stock and sell all these and will beat any of Summit or Jegs pricing!

Steisa01 · 02-02-2017, 07:34 PM

Atomic fusion I am interested a 17in drag pack setup for my 2013 zl1. Can you hook me up?

12oclockshadow · 08-29-2020, 10:36 AM

Love the weld setup. Looks killer!

02-18-2016, 12:25 PM	#31
GODZL1A Drives: 2015 ZL1 Join Date: Jun 2015 Location: florida Posts: 487	I was able to make it to PBIR last night and I went almost a tenth faster. The only thing I did was launch in D instead of M, I trapped about 5 MPH faster all night. I made about 10 passes ranging from 10.80 to 10.698 with the majority of them being 10.7's. David Attached Images

07-05-2016, 04:36 AM	#33
GODZL1A Drives: 2015 ZL1 Join Date: Jun 2015 Location: florida Posts: 487	Finally got my new tag Attached Images

08-17-2016, 03:14 PM	#34
GODZL1A Drives: 2015 ZL1 Join Date: Jun 2015 Location: florida Posts: 487	I installed my AFCO heat exchanger & Roto-Fab reservoir over the weekend with some help from a friend I also rerouted the hoses to make it look a little cleaner Attached Images

08-29-2020, 10:36 AM	#39
12oclockshadow Drives: 2012 ZL1 M6 Join Date: Feb 2019 Location: Conroe, Tx Posts: 221 View My Garage	Love the weld setup. Looks killer! __________________ FBO. Cammed. Flex fuel.801whp/741wtq on e85

02-10-2016, 07:33 AM	#30
GODZL1A Drives: 2015 ZL1 Join Date: Jun 2015 Location: florida Posts: 487	No problem glad I could help David

02-18-2016, 01:42 PM	#32
Dutchman427 Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009 Location: Reading, PA Posts: 1,040	Looks great and great times!

08-20-2016, 07:19 AM	#36
GODZL1A Drives: 2015 ZL1 Join Date: Jun 2015 Location: florida Posts: 487	Yes it was.......I seen the other tread that's going on about it but from what I was told if there's air in the system the IAT2 temps will sky rocket at idle mine stay around 90 degrees David

09-20-2016, 11:44 AM	#37
atomicfusion Drives: 07 Z06 11 L99 SS 16 c7 16 1SS Join Date: May 2009 Location: Ohio Posts: 281 View My Garage	If anyone needs drag packs like this I stock and sell all these and will beat any of Summit or Jegs pricing!

02-02-2017, 07:34 PM	#38
Steisa01 Drives: 2013 Chevrolet Camaro ZL1 Join Date: Dec 2016 Location: Fort Wayne, Indiana Posts: 33	Atomic fusion I am interested a 17in drag pack setup for my 2013 zl1. Can you hook me up?