Fog Lights for the LS ?? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

technoside2 · 12-26-2009, 02:02 PM

OK So, I guess I bought the Non-RS kit. Your product descriptions are very miss leading. If you buy something off your website that says it's made for the non RS package you'd think that was for the LS models. B/c I don't have and RS package. I was just upset over christmas b/c I open the box and there's no houseing. I think I'm going to just go to the dealer and see if I can just order the houseing for the fog lights and keep the kit that I have.

BFxenon.com · 12-26-2009, 09:53 PM

The bulbs that come in the housing are 5202. If you get the housings, you will not have the correct wiring to make them turn on. If you did find a stock pigtail that you could cut and splice into your factory lights, they would still be only DRLs.

You need the whole kit to convert it over.

Quote:

Originally Posted by technoside2

OK So, I guess I bought the Non-RS kit. Your product descriptions are very miss leading. If you buy something off your website that says it's made for the non RS package you'd think that was for the LS models. B/c I don't have and RS package. I was just upset over christmas b/c I open the box and there's no houseing. I think I'm going to just go to the dealer and see if I can just order the houseing for the fog lights and keep the kit that I have.

BFxenon.com · 12-26-2009, 10:04 PM

also, I dont list it as a kit for the LS because I have done the LS install myself yet... I am not 100% of everything you need to make it go together.

The only thing I think you might need is a new black plastic surround in the factory fog light pocket. You may or may not... Thats the only thing that I'm up in the air about

xpanda305x · 12-27-2009, 12:13 AM

Please let us know if this works with an LS camaro?

i mean if u guys were close to Florida..i would drive to ya. but u r in the other side of the country..

Nutbutt · 12-27-2009, 06:37 PM

Yes the RS package that BF sells does work in an LS. I have already installed in my LS however it is still in the shop getting some paint work. My friend stopped by with his LS today and had the same question, so I opened up his wheel well to show with how easy it really is to install.
Here is a picture through the wheel well. Same configuratio as the LT/SS DRL mounting.
The second is the front with the LS DRL bezel removed.
Just take the housing from the kit and push it into the four mounting holes and it snaps right in. I then adjusted the alignment with the screw on the back of the housing.
You will need to cut the backside of the bezel off before installing.
The worst part of the install is routing the wire through to the dash board. There has to be a better way than I did it but its done.
More pictures when my car gets home !

Hollywood2 · 01-29-2010, 12:50 AM

got a quick question that i hipe SOMEONE can answer tonight....when installing the bfxenon on the ls.....do you cut the center out of the black inserts or the whole back off or what? please help ASAP

BFxenon.com · 01-29-2010, 09:28 AM

just the center is sufficient, enough so the housings can sit through

BFxenon.com · 03-03-2010, 01:27 PM

Here is our new LS Fog light kit product page...

Let me know what you think:
http://www.bfxenon.com/Camaro_LS_Fog...-camarolsf.htm

ReD MaRo Ls · 04-04-2010, 01:45 AM

You might want to try this site. They have alot of things you just might like.

http://www.automotivelightstore.com/...letcamaro.aspx

ABM/IOM · 04-18-2010, 01:43 PM

i have an LS and just installed factory fog lights and harness but they are not working any ideas?????? HELP

BFxenon.com · 04-19-2010, 10:43 AM

Do you have any pictures I could reference?

Quote:

Originally Posted by ABM/IOM

i have an LS and just installed factory fog lights and harness but they are not working any ideas?????? HELP

oryviej · 05-25-2010, 04:31 PM

anybody know what I can do to change the actual fog light bulb on a non rs to red? i cant find a bulb already tinted. I dont know much about bulb covers. Maybe I could tint the entire lens red. Please help

BFxenon.com · 05-25-2010, 04:34 PM

we can tint the whole housing... we can do a smoke red on the lense. As for getting a red bulb..... no clue! never seen a P13W red bulb

Quote:

Originally Posted by oryviej

anybody know what I can do to change the actual fog light bulb on a non rs to red? i cant find a bulb already tinted. I dont know much about bulb covers. Maybe I could tint the entire lens red. Please help

Support@OracleLights.com · 05-26-2010, 06:17 PM

I've got a gread mod for all those with LS models! Hella fog light projector kits (you can have HIDs in your fog lights).
Check them out: http://www.automotivelightstore.com/CamaroFogKit.aspx
PM me or give me a call at 1-800-407-5776 if you want more information.

12-27-2009, 06:37 PM	#33
Nutbutt Drives: 2011 RJT 2LT/RS Convertible Join Date: Nov 2009 Location: Western Massachusetts Posts: 3,381 View My Garage	Yes the RS package that BF sells does work in an LS. I have already installed in my LS however it is still in the shop getting some paint work. My friend stopped by with his LS today and had the same question, so I opened up his wheel well to show with how easy it really is to install. Here is a picture through the wheel well. Same configuratio as the LT/SS DRL mounting. The second is the front with the LS DRL bezel removed. Just take the housing from the kit and push it into the four mounting holes and it snaps right in. I then adjusted the alignment with the screw on the back of the housing. You will need to cut the backside of the bezel off before installing. The worst part of the install is routing the wire through to the dash board. There has to be a better way than I did it but its done. More pictures when my car gets home ! Attached Images __________________ 1st IPF Supercharged 2011 2LT/RS RJT Convertible

04-18-2010, 01:43 PM	#38
ABM/IOM Drives: aqua blue ls and inferno orange ss Join Date: Feb 2010 Location: Florida Posts: 216	cant get new fog lights to work on LS i have an LS and just installed factory fog lights and harness but they are not working any ideas?????? HELP

05-25-2010, 04:31 PM	#40
oryviej Drives: Red 2LT with black stripes Join Date: Jan 2010 Location: Lake Charles, La Posts: 45 View My Garage	anybody know what I can do to change the actual fog light bulb on a non rs to red? i cant find a bulb already tinted. I dont know much about bulb covers. Maybe I could tint the entire lens red. Please help __________________ Message Me

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fog lights	camarogolfguy	5th Gen Camaro SS LS LT General Discussions	36	12-03-2017 08:42 PM
FOG LIGHTS ON RS	blueforza	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	17	04-17-2011 08:04 PM
Automatic Fog Lights	cmgolfr212	5th Gen Camaro SS LS LT General Discussions	13	05-16-2010 03:48 AM
fog lights again	BigTrap1967	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	9	09-14-2009 10:09 AM
Fog Lights	MB2010CC	Cosmetics and Lighting Modification Discussions	34	01-18-2009 02:45 PM

12-26-2009, 02:02 PM	#29
technoside2 Drives: 2010 Black Camaro LS Join Date: Sep 2009 Location: Dallas Posts: 170	OK So, I guess I bought the Non-RS kit. Your product descriptions are very miss leading. If you buy something off your website that says it's made for the non RS package you'd think that was for the LS models. B/c I don't have and RS package. I was just upset over christmas b/c I open the box and there's no houseing. I think I'm going to just go to the dealer and see if I can just order the houseing for the fog lights and keep the kit that I have.

12-26-2009, 10:04 PM	#31
BFxenon.com Account Suspended Drives: Camaro Join Date: May 2009 Location: BFxenon.com Posts: 461	also, I dont list it as a kit for the LS because I have done the LS install myself yet... I am not 100% of everything you need to make it go together. The only thing I think you might need is a new black plastic surround in the factory fog light pocket. You may or may not... Thats the only thing that I'm up in the air about

12-27-2009, 12:13 AM	#32
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	Please let us know if this works with an LS camaro? i mean if u guys were close to Florida..i would drive to ya. but u r in the other side of the country..

01-29-2010, 12:50 AM	#34
Hollywood2 Drives: 2010 Black Camaro LS Join Date: Jan 2010 Location: Waco, TX Posts: 86	got a quick question that i hipe SOMEONE can answer tonight....when installing the bfxenon on the ls.....do you cut the center out of the black inserts or the whole back off or what? please help ASAP

01-29-2010, 09:28 AM	#35
BFxenon.com Account Suspended Drives: Camaro Join Date: May 2009 Location: BFxenon.com Posts: 461	just the center is sufficient, enough so the housings can sit through

03-03-2010, 01:27 PM	#36
BFxenon.com Account Suspended Drives: Camaro Join Date: May 2009 Location: BFxenon.com Posts: 461	Here is our new LS Fog light kit product page... Let me know what you think: http://www.bfxenon.com/Camaro_LS_Fog...-camarolsf.htm

04-04-2010, 01:45 AM	#37
ReD MaRo Ls Drives: 2010 Camaro LS Join Date: Apr 2010 Location: New Orleans, LA Posts: 69 View My Garage	You might want to try this site. They have alot of things you just might like. http://www.automotivelightstore.com/...letcamaro.aspx

05-26-2010, 06:17 PM	#42
Support@OracleLights.com Drives: www.CamaroLighting.com Join Date: May 2010 Location: New Orleans, LA Posts: 3,245	I've got a gread mod for all those with LS models! Hella fog light projector kits (you can have HIDs in your fog lights). Check them out: http://www.automotivelightstore.com/CamaroFogKit.aspx PM me or give me a call at 1-800-407-5776 if you want more information.