![]() |
|
|
#43 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 imperial blue SS, black 92 RS Join Date: Apr 2011
Location: Denham Springs
Posts: 2,580
|
I almost ordered them a few weeks ago. Glad I didn't.
__________________
2011 imperial blue SS/RS a6 12.43@112 vararam, tune, jba cats, magnaflow axle back, self ported tb, under drive pulley, NO headers, Stock tires. 1.87 60ft. Stock tires. SOLD :(
2000 1500 silverado extra cab SOLD :( 2017 Silverado 5.3 all stock 2004 5.7 GTO 78mm turbo |
|
|
|
|
|
#44 |
![]() Drives: 2018 Hot Wheels 2LT Join Date: Jul 2010
Location: La Vergne TN
Posts: 454
|
I took apart my leaky tail light today (passenger side outer) and as you can clearly see in the picture they didn't silicone it good enough. I drew a yellow arrow on the picture pointing to where you can see the hole that is letting water in. I had about 2 inches of water sitting in there. I contacted Todd at technostalgia, but I am going to attempt to silicone it and fix it myself. The light was still functioning fine even with the water sitting in there so I don't see the need in them sending me a new one.
My recommendation to anyone looking to buy these lights is to silicone them yourself once they arrive BEFORE you take all the time to install them (cuz the installation is not fun) and you shouldn't have any problems with water leaking in. I understand and agree these are expensive lights and no one should have to take this extra step BUT it will save a lot of headache for you! I will be sure to let ya'll know if this fixes my leaky tail light! |
|
|
|
|
|
#45 |
![]() Drives: 2010 2SS Imperial Blue Join Date: Mar 2010
Location: Lindenhurst, NY
Posts: 216
|
Thanks for the post Jeremeymt, Im going to remove mine 1 more time and reseal them myself, I cant be bothered with dealing with the company on this, even more so I bought them from a Camaro5 vendor but I had to deal directly with the manufacturer for the warranty work. I hope it works out for you.
__________________
2010 2SS IBM L99 6A, Janetty Tune, Dynatech headers and cats, Flowmaster exaust, SLP underdive pulley, CAI inc. CAI, MSD wires, LED's -taillights, side markers, knight rider, interior, Chevy emblem, rear plate
|
|
|
|
|
|
#46 | ||
![]() Drives: 2011 Camaro 2ss Join Date: May 2012
Location: New York
Posts: 27
|
Quote:
|
||
|
|
|
|
|
#47 | |
![]() Drives: 2011 Camaro 2ss Join Date: May 2012
Location: New York
Posts: 27
|
Quote:
|
|
|
|
|
|
|
#48 |
![]() Drives: 2010 Cyber Grey Join Date: Feb 2010
Location: Ga
Posts: 703
|
I just got a phone call from a nice lady telling me that my lights are in and they got to me on the waiting list. I think I will wait it out a few months to see how this goes. Considering the cost I think I should not have to be sealing things myself. Please update the thread as I am interested on how the warranty plays out. Wizzer |
|
|
|
|
|
#49 |
![]() Drives: 2018 Hot Wheels 2LT Join Date: Jul 2010
Location: La Vergne TN
Posts: 454
|
So far so good on re-sealing them myself.
|
|
|
|
|
|
#50 | |
![]() Drives: 2011 Camaro 2ss Join Date: May 2012
Location: New York
Posts: 27
|
Quote:
I posted this on my thread but Ill repost So I called them today they got my taillights said the electronics in the taillight got loose. Whatever that means. They did not test it for the water leaking into it. They said it never said to. Thats fine. They then said they will check it out and have them sent out tomorrow. I will call and see what the issue was tomorrow. Great customer service just sucks to have issues for expensive taillights. They never asked about a warranty. Which is good makes it seem like they care about there customers |
|
|
|
|
|
|
#51 |
![]() Drives: 2018 Hot Wheels 2LT Join Date: Jul 2010
Location: La Vergne TN
Posts: 454
|
So we had a big rain yesterday and low and behold my tail light took on water and this time it has caused a few of the LEDs to stay on constantly. So I give up. Calling Todd monday and see if I can get a new one sent out. So frustrating!
|
|
|
|
|
|
#52 |
|
Use the Force
|
As much as I like these lights and want to buy a set, the persistent water/electrical problems hold me back. Are these lights leaking at the same place on everyone's lights?
__________________
Walk softly, carry a light saber and drive a ZL1!
|
|
|
|
|
|
#53 |
|
Bowties forever
Drives: 2010 2SS/RS, 2015 Ram 1500 Sport Join Date: Jun 2010
Location: Northeast, FL
Posts: 490
|
I think I'm in the same boat as you. I was about to pull the trigger right now from phastekperformance, but glad I checked the forums! The lights look sick, but not going to buy a product with this many problems! Sorry! Thank God for Camaro5!!!
__________________
“LUCILLE” 2010 RJT 2SS/RS M6
5% tint, AC red interior overhead LED, footwell, grill and engine bay lighting, license plate LEDs, reverse LEDs, painted black badges, bowtie, and tail light bezels, Heritage grill, T3 ports with LEDs, T3 splitter with cooler, carbon fiber vinyl hashmarks, TSW Nurburgring wheels, Nitto Invo tires, Hurst shifter, RX 1LE catch can, Rotofab intake, American Racing headers, Flowmaster exhaust, CMS camshaft, 3.91 rear end, BMR suspension, StopTech rotors, steel brake lines 456RWHP 422Tq on Mustang Dynamometer. Built, tuned by Cunningham Motorsports. SD Region SCCA |
|
|
|
|
|
#54 |
![]() ![]() ![]() Drives: 2018 ZL1 Join Date: Oct 2011
Location: Huntingtown, MD
Posts: 1,138
|
|
|
|
|
|
|
#55 |
![]() ![]() ![]() |
I posted this in another thread.
I have had my lights since january with no problems until this past weekend. Mine started doing "show mode" at random, then realized that the driver side only would do show mode, and marker light.....no brake, blink or hazzard I boxed them up and sent them back to Technosalgia yesterday for repair. Got the lights back in 4 days! super fast turn around I think. So far so good, seem to be working great now!!
__________________
2020 Range Rover Sport HSE P525 Supercharged 5.0 - Firenze Red - 9012 wheels
SOLD 2019 Camaro SS -Wrapped in Matte Magnectic Black - Anderson Carbon Hood and Rear Spoiler – Ikon front spoiler – OEM ZL1 Side Rockers - ZL1 Addons Diffuser - BMR 1.0” Lowering Springs - MRR 228 Wheels 20x10 and 20x11 RIP 2016 Camaro SS https://www.camaro6.com/forums/showthread.php?t=565453 SOLD 2010 Camaro SS Featured in GM High Tech Performance and Camaro Now Magazines - http://www.superchevy.com/features/g...of-perfection/ |
|
|
|
|
|
#56 |
![]() |
I just got my lights Friday and got them in my son is good with electrical he has installed alot of lights and everything looked good until we turned on the running lights on one of them all the LEDs don't work, Will have to wate till Monday to contact them.
__________________
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| HOW DO WE LIKE THE LED TAIL LIGHTS? | carguy50 | Cosmetics and Lighting Modification Discussions | 15 | 05-14-2011 01:49 AM |
| Camaro TINTED TAIL LIGHTS!!!!!!! | MotorCityCustoms | Cosmetics and Lighting Modification Discussions | 4 | 02-22-2010 10:04 PM |
| LED Tail lights | 69er | Cosmetics and Lighting Modification Discussions | 16 | 12-17-2009 02:31 PM |
| New LED Tail Lights for us 3rd Genners! | Sinister | 3rd Generation Camaros | 8 | 09-25-2009 07:12 PM |